ENERSHARE EB-1204A Lithium Motorcycle Battery User Guide

ENERSHARE EB-1204A Lithium Motorcycle Battery

Product Information

Specifications

• Product Name: 12V 4AH Motorcycle Battery
• Product Type: 12V LiFePO4 Motorcycle Battery
• Storage   Temperature: EB-1204A -20°C to 70°C, EB-1204C -20°C to 70°C
• Weight: EB-1204A 0.8kg, EB-1204C 0.85kg
• Capacity: 4AH
• Peak Current: EB-1204A 350A, EB-1204C 400A
• Continuous Current: EB-1204A 110A, EB-1204C 160A
• Dimensions: 133mm x 74mm x 101mm

Product Usage Instructions

Fitting

• Before fitting the battery, check its voltage using a voltmeter.
  The voltage should be between 13V to 14V. If it falls within this range, you can proceed with fitting the battery.

• Make sure the motorcycle is turned off before fitting the battery. Always follow the motorcycle manufacturer’s directions for fitting.

• Connect the positive and negative leads correctly. If needed, use a spacer or stick form to ensure the best possible fit.

Application

• The 12V 4AH Motorcycle Battery is suitable for use in motorcycles, ATVs, scooters, dirt bikes, snowmobiles, personal watercraft, and lawnmowers. It can replace a 12V lead-acid battery with a capacity under 16AH.

Charging

• The battery can be charged while the motorcycle is running or using a charger during regular maintenance or repair.
• Both the motorcycle and the charger should limit the charging voltage to 14.6V. Charging the battery with a voltage lower than 14.0V will not fully charge it, while exceeding 14.6V can damage the battery.
• When using a charger, ensure it is compatible with lithium batteries. Always remove the battery from the motorcycle before charging separately.
• Charge the battery with a current lower than the MAX Charging Current specified in the instructions.
• If the voltage is less than 12.8 volts after charging, additional charging is necessary to fully charge the battery.
• If the battery becomes hot to the touch during charging, stop charging and allow it to cool before resuming. If the battery continues to overheat even with a low current of 2A, stop using it as it may be damaged.

Storage Condition

• Store the lithium-ion battery in a cool, dry, and well-ventilated place away from water, fire, and heat.
• The recommended storage temperature is between -20°C and 70°C, with humidity lower than 75% RH.
• Store the battery with approximately 70% capacity. Avoid exceeding 6 months of storage time without fully charging the battery.
• If the battery remains idle for a long period, its capacity will decrease, and it should be fully charged every 6 months.

Transportation

• When transporting the battery, pack it with insulating and shockproof materials to prevent damage from bumps.
• Ensure the battery pole is placed upward and do not put the battery upside down. Mark the direction on the outer package.
• Handle the battery with care during loading and unloading to avoid collisions. Do not throw the battery or place heavy objects on it to prevent damage.
• Do not transport the battery together with flammable, explosive, or sharp metal goods. The packaging should have moisture-proof and waterproof labels to ensure safe transportation.
• The battery will be transported at approximately 85% capacity.

Maintenance

• If the vehicle is in storage or used infrequently, it is recommended to disconnect the battery cable. Alternatively, use a battery maintainer or charger to keep the battery charged.

FAQ

Q: Can I use this battery for a vehicle with a lead-acid battery?

• A: Yes, the 12V 4AH Motorcycle Battery can replace a 12V lead-acid battery with a capacity under 16AH.

Q: What should I do if the battery becomes hot during charging?

• A: If the battery becomes hot to the touch during charging, stop charging and allow it to cool before resuming. If it continues to overheat even with a low current of 2A, stop using it as the battery may be damaged.

Q: How should I store the battery?

• A: Store the battery in a cool, dry, and well-ventilated place away from water, fire, and heat. Keep it at approximately 70% capacity and fully charge it every 6 months if left idle for a long period.

Q: Can I transport the battery with other goods?

• A: Do not transport the battery together with flammable, explosive, or sharp metal goods. Ensure proper packaging with moisture-proof and waterproof labels to avoid any potential dangers during transportation.

Product Specification

12V LiFePO4 Motorcycle Battery

Model#| EB-1204A| EB-1204C
Nominal Voltage| 13.2V| 13.2V
Capacity| 4AH| 4AH
Weight| 0.8kg| 0.85kg
Max Cranking Current| 350A| 400A
Cold Cranking Current (–18˚ C)| 110A| 160A
Dimensions（LWH)  including spacer| 13474101（132）| 13374101（132）
Operating Temperature| -20℃～ 70℃| -20℃～ 70℃
**** Storage Temperature| -20~75 °(1 month)

-20～45°(2 month)

-20～25°(6 month)

| -20~75 °(1 month)

-20～45°(2 month)

-20～25°(6 month)

Fitting

• Check the battery voltage with a voltmeter before fitting. If the voltage is between 13v to 14v, then start to fit the battery.
• The motorcycle must be turned off before fitting the battery.
• Always follow the motorcycle manufacturer’s direction when fitting.
• Connect correctly the positive and negative leads.
• Fit the battery with a spacer or stick form when needed for the best possible fit

Application

• Motorcycle, ATV, Scooter, Dirt Bike, Snowmobile, Personal Watercraft, Lawn Mower. Can be a replacement for a 12V lead-acid battery with a capacity under 16AH.

Charging

• The battery is usually charged while the motorcycle is running, and it can also be charged by the charger during regular maintenance or repair.
• Both the motorcycle and the charger need to limit the charging voltage to 14.6V. The battery can not be fully charged if the charging voltage is lower than 14.0V, and the battery will be damaged if the charging voltage exceeds 14.6V.
• When you charge the battery with a charger, please make sure to use the correct charger which is compatible with the lithium battery.
• Always remove the battery from the motorcycle before charging separately. Charge the battery with a lower current than the MAX Charging Current per instruction.
• If the voltage is less than 12.8 volts after charging, the battery is not fully charged and additional charging is necessary.
• If the battery becomes hot to the touch, stop charging and cool the battery before resuming. If the battery still overheats after charging with a low current of 2A, please stop using it, the battery may be damaged.

Storage Condition

• Lithium-ion batteries should be stored in a cool, dry, and well-ventilated place, keeping away from water, fire, and heat.
• To minimize the adverse effects on the battery, the recommended storage temperature is in the range of ­5℃～35℃ and the humidity is lower than 75% RH.
• The battery should be stored at 70% capacity.
• The recommended storage time should not exceed 6 months.
• If the battery is left idle for a long period the capacity will decrease and the battery should be fully charged every 6 months.

Transportation

• The battery should be packed with insulating and shockproof materials to avoid damage caused by bumps in transportation.
• The battery pole should be placed upward, do not put the battery upside down. A direction mark should be made on the outer package.
• The battery must be handled with care when loading and unloading during transportation. Do not throw the battery to avoid collision.
• Do not put heavy objects on the battery to avoid damage to the battery caused by squeezing.
• Do not transport the battery together with flammable, explosive, and sharp metal goods.
• There should be moisture-proof and waterproof labels on the packaging to avoid danger due to transportation.
• The battery will be transported at about 85% capacity.

Maintenance

• Disconnecting the battery cable always is the best choice if the vehicle is in storage or used infrequently. Or use a standard maintainer or charger to maintain the battery. Or regular charging of the battery.
• Keep the connecting poles clean and securely fastened.
• The battery is factory-sealed and requires no topping up of any fluid. Never attempt to open the battery.
• Appearance inspection: The gap between the upper and lower covers is even, and the inside of the battery is not loose when shaken
• Check the output voltage: If the battery stands by for a while, the voltage in case lower than 12.8 Volts, recharge the battery per charging instructions.

Cautions

• Do not wash the battery with water to avoid damage to the battery.
• Do not use or store the battery near the fire or heat.
• Do not reverse the positive (+) or negative (-) terminals to avoid danger.
• Do not short-circuit the battery by connecting wires or other metal objects to the positive (+) and negative (-) terminals.
• Do not pierce the battery casing with a nail or other sharp objects, break it open with a hammer, or step on it.
• Do not strike, throw the battery to severe physical shock.
• Do not use the battery if it gives off a strange odor, becomes hot, discolored, or deformed, or if any abnormality occurs.
• If the battery is in use or being recharged, remove it from the device or charger and stop using it immediately.
• Do not use more than one battery in parallel or series.
• Do not charge the battery by charging a voltage over 14.6V.
• Please fix the battery terminal with the original screws and nuts securely. The battery or even the vehicle can be damaged by sparks due to loose connections.
• When the battery is used for a motorcycle, please use it for a suitable motorcycle.
• In addition to the rectification and charging of motorcycle power generation, please use the correct charger which is compatible with the lithium battery.
• The cranking performance will be affected when the environment temperature is lower than -18℃
• Keep out of reach of Children and Pets.
• Do not attempt to disassemble or modify the battery in any way.
• Battery recycling is encouraged. Do NOT dump into any sewers, on the ground, or into any body of water. Dispose of under local laws and regulations.

First Aid Measures

• Inhalation: If the contents of an opened battery cell are inhaled, remove the source of contamination or move the victim to fresh air. Obtain medical advice.
• Eye Contact: Contact with the contents of an opened battery cell can cause burns. If eye contact with the contents of an open cell occurs, immediately flush the contaminated eye(s) with lukewarm, gently flowing water for at least 30 minutes and quickly transport the victim to an emergency care facility.
• Skin Contact: If skin contact with the contents of an open cell occurs, Immediately flush with lukewarm, gently flowing water for at least 30 minutes. If irritation or pain persists, seek medical attention.

Advantages

• An Intelligent Battery Management system protects the battery from over-charge and over-discharge.
• Lightweight is only about 1/3 weight of the lead-acid battery.
• High cranking amp, starts the motorcycle easily
• High CCA better performance at low temperatures.
• Safety reliable, and environmentally friendly
• Energy efficiency – high and stable voltage level improves the action efficiency of the spark plug and saves fuel.
• Note: Enershare is not liable for problems that occur when the above instructions are not followed.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>