amazon B083RQRBHL Glass Suction Cups Instruction Manual

amazon B083RQRBHL Glass Suction Cups

Product Information

The Glass Suction Cup with Case is a versatile tool designed to provide a secure grip on smooth, non-porous surfaces. It is perfect for lifting and moving glass, tiles, mirrors, and other similar materials. The product comes with a protective case for safe storage and transport.

Specifications

• Material: High-quality ABS plastic
• Suction Pad Diameter: 4 inches
• Maximum Load Capacity: 100 lbs
• Weight: 0.5 lbs

Frequently Asked Questions

• Q: Can I use the Glass Suction Cup on curved or rough surfaces?
  • A: No, the Glass Suction Cup is designed for use on flat, non-porous surfaces. It may not provide a secure grip on curved, rough, or porous surfaces.
• Q: What should I do if I encounter any technical problems?
  • A: If you face any technical issues or have any questions regarding the product, please feel free to contact the seller for assistance and resolution.

Product Usage Instructions

Preparing the Surface

• Before using the Glass Suction Cup, ensure that the surface is clean, smooth, and free from any dirt, oil, or water.
• The suction cup performs best on flat, non-porous surfaces.

Attaching the Suction Cup

To attach the suction cup to the surface, follow these steps:

1. Select a suitable location on the surface where you want to place the suction cup.
2. Place the suction pad of the cup onto the surface, ensuring it is centered and aligned.
3. Apply gentle pressure on the center of the suction pad to create an initial seal.

Pumping and Securing:

Once the suction cup is attached to the surface, follow these steps to pump and secure it:

1. Hold the handle of the suction cup firmly with one hand.
2. With your other hand, repeatedly press the pump lever until the suction cup firmly attaches to the surface.
3. Check the stability of the suction cup by gently pulling or shaking it. It should hold firmly without any movement.

Removing the Suction Cup

To remove the suction cup from the surface, follow these steps:

1. Place your finger or a thin object under the edge of the suction pad to release the seal.
2. Gently lift the edge of the suction pad to break the suction.
3. The suction cup should now release from the surface easily.

Note: Always handle the Glass Suction Cup with care and avoid dropping it or subjecting it to excessive force, as it may cause damage to the product or the surface.

OPERATIONS

CORRECT OPERATION

1. Place the suction cup on a flat, smooth and non-porous surface.
2. Hold the handle with one hand and press down hard to make the suction cup better adsorbed on the plane, the other hand keep pumping until the red warning line is invisible.
3. Before lifting the object, shake the suction cup, if the suction cup is not shaken, it means the suction cup has been successfully extracted.
4. After the work is completed, release the air by means of the release valve or the quickly deflate tab.

ERROR OPERATION

1. Putting the suction cup on the curved, rough and porous plane or the plane has oil or water.
2. Just put the suction cup on the plane of the object, pumping without pressing down hard at the same time.

Note: Any technical problems, please feel free to contact the seller to solve.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>