electriQ eiQ-49CV5UWD120FSHQA-V3 49 Inch LED Curved Monitor User Manual

electriQ eiQ-49CV5UWD120FSHQA-V3 49 Inch LED Curved Monitor

SAFETY INFORMATION

• Read these instructions – All the safety and operating instructions should be read before this product is installed or operated.
• Keep these instructions – The safety and operating instructions should be retained for future reference.
• Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
• Follow all instructions – All operating and usage instructions should be followed.
• Do not use this equipment near water – The appliance should not be used near water or moisture e.g. in a wet basement or near a swimming pool.
• This monitor is designed for indoor use only.
• Clean only with a dry cloth. Do not use solvents or petroleum-based fluids.
• Do not block any ventilation openings.
• Do not install near any heat sources such as radiators, stoves or other apparatus (including amplifiers) that produce heat.
• Do not tamper with the supplied plug. This plug is a BS1363 standard plug.
• Protect the power cord from being walked on or pinched, particularly at the plug and at the point where it exits from the appliance.
• Only use attachments/accessories specified by the manufacturer.
• Unplug the apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as:
  • The power supply cord or plug has been damaged.
  • Liquid has been spilled or the monitor has been exposed to rain or moisture.
  • Objects have fallen into the apparatus.
  • It does not operate normally or has been dropped.
• Please keep the unit in a well-ventilated environment.
• The monitor should only be connected to a mains power supply with AC 100- 240V~ 50/60Hz.
• To prevent overload, do not share the same power supply socket with too many other electronic components.
• Do not place any connecting wires where they may be stepped on or tripped over.
• Do not place heavy items on the cable as this may cause damage.
• When removing from a socket grip the plug, not the cable.
• Disconnect the plug immediately and seek professional help if the plug or cable is damaged, liquid has spilt onto the monitor, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the set does not work normally.
• Do not remove the safety covers. There are no user serviceable parts inside.
• Do not block ventilation slots on the back cover. The monitor can be placed in a cabinet but ensure the guidance on clearances (see next page) are followed.
• Do not tap or shake the screen, this may damage internal components.
• Diagrams within the manual are for illustrative purposes only, and as such there may be differences to the actual product received.
• This is a CLASS I product and as such requires an earth connection.

WARNINGS

Never place a monitor in an unstable location. A monitor may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Use cabinets or stands recommended by the manufacturer of the monitor.
• Only use furniture that can safely support the monitor.
• Ensure the monitor is not overhanging the edge of the supporting furniture.
• Do not place the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the monitor to a suitable support.
• Do not place the monitor on cloth or other materials that may be located between the monitor and the supporting furniture.
• Educate children about the dangers of climbing on furniture to reach the monitor or its controls.

If your existing monitor is being retained and relocated, the same considerations as above should be applied.

AT FULL VOLUME, PROLONGED LISTENING MAY DAMAGE THE USER’S HEARING.

AT FULL VOLUME, PROLONGED LISTENING MAY DAMAGE THE USER’S HEARING.

This warning sign is to warn of dangerous voltage inside the product.

|

CAUTION: To reduce the risk of electric shock, DO NOT remove the cover (or back). No user serviceable

parts inside. Refer servicing to qualified service personnel.

|

This warning sign is to alert you of important instructions accompanying the product.

WHAT IS SUPPLIED

PREPARING THE MONITOR FOR USE

• Place the monitor on a firm and flat surface, leaving a space of at least 10cm around the unit and 30cm from the top of the unit to the ceiling or cabinet. Ensure the monitor is positioned close to the wall to avoid it falling when pushed.
• When twisting the monitor, do not hold by the top, you should t w ist from the base.
• When lifting the monitor, do not use one hand to handle it, you should lift the monitor using two hands, ensuring pressure is not put on the screen itself.

ATTACHING THE STAND

• Due to the heavy weight and dimensions of the screens and their fragile nature, we recommend that they are unpacked and assembled by 2 people.
• electriQ and its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure to observe these safety instructions. In such cases any guarantee will be void.
• Keep the foam underneath the monitor before attaching the stand.
• To avoid damage, do not touch the screen when moving the monitor.

1. Open the packaging, take out the monitor with foam still attached and gently place it on a desk or table.
2. Take out the two main parts of the stand. Then use a screwdriver (not included) and bolts to fasten the base to the stem.
3. Align the stand stem bracket with the opening on the back of the monitor and carefully insert the top of the bracket into the monitor, before pressing the base of the bracket into position, which should securely click into place.

HOW TO REMOVE THE STAND

Before removing the stand, remove the port cover from the rear of monitor. Ensure that the monitor is laid with the screen facing downwards, while suitably supported (Ideally in the original polystyrene) Press the switch down to release the monitor from the bracket.

WALL MOUNTING

• The monitor is provided with mounting holes for a VESA approved wall mounting bracket (not supplied).
• The VESA mounting pattern is: 75x75mm and the size of the screws is 4 x M6 x 10 (not supplied)
• Do not use screws longer than specified or damage will occur to the internal components.

NOTE: As the monitor is considered heavy, please consult with a professional wall mount installer to perform the installation.

1. Open the package, take out the product with the foam still attached, and gently place it on a desk or table. Remove the accessories and the foam covering the rear of the monitor. If the monitor was already attached to the stand, remove the stand.
2. Remove the original bolts x 4 from the opening in the backof the monitor.Follow the directionsreceived with your mount, stand, or accessory and install the monitor on the wall or fixture as desired. Remember to use the included bolts when attaching anything to the back of the monitor. Do not discard the original bolts as these may be needed for future use.

NOTES:

• Do not pinch the screen directly with your hand when hanging the product to prevent the screen from breaking.
• Due to the heavy weight and dimensions of LCD screens and their fragile nature, we recommend that they are unpacked and assembled by 2 people and professional installers are used to wall mount them (wall mounting is optional).
• If you do not understand the instructions, or are unsure how to install this product, please contact a professional for assembly advice and assistance.
• Careful consideration should be made regarding the location the monitor is to be wall mounted as some walls are not suitable for installation. If the monitor is to be mounted on drywall, the mount must be anchored into a wooden stud, concrete block or brick behind the drywall. Installing on drywall alone may not support the weight of the display.
• When drilling holes, it is particularly important to take care of electrical cables, water or gas pipes in the wall. Please follow the instructions provided by the wall bracket manufacturer and ensure that all fixing bolts supplied are used.
• electriQ and its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure to observe these safety instructions. In such cases any guarantee will expire.

GETTING STARTED

CONNECTIONS AVAILABLE ON THE MONITOR

1

| Audio Output: Insert an Audio cable into the monitor to output sound to a device, such as headphones or speakers.
---|---

2

| DP (Display Port) 1.4 (x2): Insert one end of the DP cable into the computer’s DP output and connect the other end to the monitor’s DP port.

3

| HDMI Port 2.1 (x2): Insert one end of the HDMI cable into a suitable HDMI output and connect the other end to the monitor’s HDMI port.

4

| ****

Power Connector: Insert the power cable

MONITOR CONTROLS

 | WHILE OSD (ON SCREEN DISPLAY) IS NOT DISPLAYED| WHILE OSD (ON SCREEN DISPLAY) IS DISPLAYED
---|---|---

M

| ****

Press to display the OSD.

| Enter the sub-menus within the

OSD or confirm the selected function.

▼

| ****

HOTKEY 1 – See OSD Settings for setting its function

| Go down within the OSD or decrease the value of a selected

setting.

▲

| ****

HOTKEY 2 – See OSD Settings for setting its function

| Go up within the OSD or increase the value of a selected

setting.

E

| HOTKEY 3 – See OSD Settings for setting its function| ****

Press to exit the OSD.

****| Press to turn the monitor On or Off.

INITIAL SETUP

1. Attach the stand or wall mount the product following the guidance on the previous pages.
2. Connect the source device (such as PC) using the correct cable.
3. Connect the power cable to the monitor and plug into a suitable socket.
4. Press the POWER button on the monitor or to turn it on.

NAVIGATING THE OSD (ON SCREEN DISPLAY)

The menu for the monitor can be accessed by pressing the menu button on the control panel. This menu is separated into the following sub menus: Game Settings, Picture Settings, Colour Settings. PIP/PBP, OSD Settings and Other Settings. Details of each menu can be found in the following sections. The OSD can be navigated using the buttons on the base of the monitor (See monitor controls on the previous page), or by using the supplied remote control. The options available within the on screen display will change depending on the method of connection, and the options chosen within related settings on the OSD.

GAME SETTINGS

On / Off

| ****

Settings optimised for standard use of the monitor.

RTS/RPG

Mode

| ****

On / Off

| Settings are optimised for real time strategy and role playing games.
FPS Arena Mode| ****

On / Off

| Settings are optimised for first person shooter games.
MOBA

Arena Mode

| ****

On / Off

| ****

Settings are optimised for multiplayer online battle arena games.

Adaptive- Sync| ****

On / Off

| Helps to reduce tearing, stuttering and judder while playing fast moving games.
Shadow Balance| ****

0 – 100

| Adjust the darkness / detail within shadows on the screen
Response Time| ****

Off, Normal, Fast, Ultrafast

| Overdrive to increase the response time of the monitor.

Refresh Rate

| Off, On, Position (Top Right,

Top Left, Bottom Right, Bottom Left)

| ****

Select whether to display the refresh rate on the screen and its position.

Game Crosshair

| Off, Crosshair 1, Crosshair 2,

Crosshair 3, Crosshair 4,

Crosshair 5, Crosshair 6,

| ****

Select whether to display crosshairs on the screen and the style of the crosshairs.

Game Time

| Off, 15:00, 30:00, 45:00, 60:00,

Position (Top Right, Top Left, Bottom Right, Bottom Left)

| ****

Set the length of the timer and the position it is displayed on the screen.

Dynamic Brightness| Off, Normal, Expert, Elaboration| Set if the screen compensates when images are dark or bright, and to what extent.
HDR| Off, HDR Standard| Use with HDR (High dynamic range) sources to increase the range of colours / brightness shown.

PICTURE SETTINGS

DCR

| ****

On / Off

| ****

Turn DCR (Dynamic Contrast Ratio) on or off, which may help the clarity of the image.

Contextual Model| Off, Movie Mode, Reading Mode, Night Mode| Select to automatically adjust the picture to suit one of the pre set modes.
Low Blue Light| ****

0 – 100

| Set to adjust the amount of low blue light which is emitted from the monitor.
Sharpness| 0 – 5| Enhances the edges of items on screen to make them appear sharper.
Gamma| 1.8, 2.0, 2.2,2.4, 2.6, S-Curve| Change to match the gamma output of the source for better colour reproduction.
Aspect Ratio| ****

Widescreen, 4:3, 1:1, Auto

| Change the shape of the image on screen. If a non widescreen option is chosen, the sides of the screen will be black.

COLOUR SETTINGS

3 different pre set colour temperatures that can be applied to the image.

Natural| On / Off
Cool| On / Off
User 1| On (R, G, B) / Off| ****

3 separate user adjustable colour temperatures, allowing you to select the Red, Green and Blue values of the output manually

User 2| On (R, G, B) / Off
User 3| On (R, G, B) / Off
Hue| 0 – 100| Adjusts the colour of the image displayed on the screen.
Saturation| 0 – 100| Increase to make colours appear sharper, reduce to make them appear more faded.

PIP (Picture in Picture) / PBP (Picture by Picture)

PIP/PBP

Mode

| Off, PIP Mode, PBP 2Win 1:1, PBP 3Win| Turn PIP/PBP on and off, and select which option is used for displaying multiple video sources.
Sub-Signal Source| ****

DP1, DP 2, HDMI1, HDMI2

| Select which input source is used for the second input.
Sub

Window 3 Input

| ****

DP1, DP 2, HDMI1, HDMI2

| ****

Select which input source is used for the third input (Only applicable for PBP 3Win)

PIP

Position

| Auto, DP1, DP 2, HDMI1, HDMI2| Select the position of the secondary video source on the screen in PIP modes.
PIP Size| Small Medium, Large| Select the size of the secondary video source on the screen in PIP modes.
Window Swap| ****

On / Off

| Swaps the primary and secondary sources on the screen.

OSD SETTINGS

displayed in
OSD Time Out| ****

5 – 60

| Select how long (in seconds) the OSD is displayed when no buttons are pressed.
OSD H-

Position

| ****

0 – 100

| ****

Select the horizontal position of the OSD.

OSD V-

Position

| ****

0 – 100

| ****

Select the vertical position of the OSD.

OSD

Transparency

| ****

0 – 5

| ****

Select how see-through the OSD is.

Hotkey1 Setting| Brightness, Contrast, Volume, Mute, Shadow, Balance, Game Crosshair, Refresh Rate, Game Time, Contextual Model, PIP/PBP Mode, Input

Signal, Dynamic Brightness, HDR

| ****

Set what menu / action is displayed when the relevant hotkey is pressed.

HotKey2 Setting
Hotkey 2 Setting
OSD

Rotation

| ****

Normal, 90, 180, 270

| Rotate the OSD on the screen – used if the monitor is not mounted in the usual horizontal position.
OSD Lock| On / Off| Lock the OSD to prevent unauthorised changes.

OTHER SETTINGS

Input Signal

| Auto, DP1, DP 2, HDMI1, HDMI2| Choose the input source which is displayed on the monitor.
Volume| 0 – 100| Adjust the volume output by the monitor
Mute| On / Off| Mute the audio output from the speakers / audio out port.
HDMI

Version

| ****

HDMI 4K, HDMI 5K

| Set whether the HDMI port is optimised for 4K or 5K input.
DP Mode| DP 4K, DP 5K| Set whether the display port is optimised for 4K or 5K input.
Auto Power| On / Off| Set whether the monitor will automatically turn on when a source starts to output to the monitor.
Eye shield Remind| ****

On / Off

| Allows you to set up regular reminders to take a

break from looking at the monitor to prevent eye strain.

Reset| Yes / No| ****

Reset the monitor back to factory settings.

Information

| Input Source, Resolution, Mode, HDR Ver, SN| ****

Display information about the monitor.

• 5K = 5120 x 1440 max, 4K = 3840 x 2160 max

SPECIFICATION

| Maximum Resolution| 5120 * 1440
Brightness| Average: 400 cd/m²

Minimum: 350 cd/m²

Response Time| 6ms
Refresh Rate (Max)| 120 Hz
Static Contrast| 3000:1
Viewing Angle (H/V)| 178° / 178°
****| HDMI Input| HDMI 2.1 x 2
Display Port Input| DP 1.4 x 2
Audio Output| x 1 (Headphone Socket)
Remote Control| 2m Maximum Operating Distance
Working Temperature| 0°C – 40°C
Working Humidity| 10% – 85% Non-condensing
Speaker Specifications| 8 Ω / 3 W

Notes:

• Due to continued product development the specification shown above may change without notice.
• Maximum resolution and refresh rate achievable is dependant on the input source and the quality / specification of cables used.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

TROUBLESHOOTING

If the display fails or the performance changes dramatically, check the display in accordance with the following instructions. Remember to check the peripherals to pinpoint the source of the failure.

Check that both ends of the power cable are plugged into the socket correctly and the wall socket is operational.

No Input Signal message appears.

| ·         Check that the input cable is connected properly.

·         Check that the power of the relevant peripherals is turned on. Check that the selected source matches the input.

·         Factory reset the monitor, using the RESET option within

the main menu.

Flashing spots or stripes appear on the screen.| ·         Check that there is no emission (car, HV cable or neon lamp) or other possible interference sources.

Image colour or quality deteriorates.

| ·         Check that all the video settings are adjusted appropriately, such as brightness, contrast, colour etc.

·         For more information about video settings, refer to OSD Functions.

Screen position and size are incorrect.| ·         Check that the screen position and size is adjusted appropriately.

Image or colour is incorrect.

| ·         Check that the signal line is connected properly.

·         When connecting to a PC, you can change the resolution of the PC to acquire the correct image. Discrepancies in the PC output signal may affect the display of the image.

Display warning message.

| ·         Check that the input signal line is properly fixed.

·         Select the correct input source.

·         For more information, refer to Supported Signal Modes.

PRODUCT DISPOSAL

Do not dispose this product as unsorted municipal waste. Collection of such waste must be handled separately as special treatment is necessary.

Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating civic amenity sites run by their local councils. Please remember that this equipment will be further handled during the recycling process, so please be considerate when depositing your equipment. Please contact the local council for details of your local household waste recycling centres.

electriQ UK SUPPORT

Complete the online support form on www.electriQ.co.uk/support Service Line: 0330 390 3061 Office hours: 9AM – 5PM Monday to Friday www.electriQ.co.uk Unit J6, Lowfields Business Park, Lowfields Way, Elland West Yorkshire, HX5 9DA

References

• Buy electriQ Appliances Online | TVs | Ovens | Dehumidifiers | Security

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>