Dpofirs B0B8ZVN88X Digital Night Vision Binoculars User Manual

Dpofirs B0B8ZVN88X Digital Night Vision Binoculars

Product Information

Specifications

• Photo Resolution: 3M(2048×1536) / 2M(1600×1200) /1M(1280×960)/VGA(640×480)
• Temperature Range: -10°C to +50°C
• Storage Temperature: -20°C to +60°C
• Dimensions: approximately 152mm12255mm
• Weight: about 440g with battery

About Charge

The device has a built-in rechargeable battery. Before first use, please fully charge it. Use a universal USB power adapter (DC 5V/2A) to charge the device.
The USB power adapter is not included. When charging, the charging indicator on the left side of the Micro USB port will turn red. When fully charged, the charging indicator will turn off. It takes approximately 4 hours to fully charge the device.

Inserting Memory Card

1. Prepare a Class 10 Micro card (up to 32GB) in advance.
2. Open the card slot cover to access the card slot.
3. Insert the Micro SD card into the slot, ensuring it is properly inserted.

Basic Operation

• To Turn On the device, long press the POWER button for 3 seconds. To Turn Off the device, long press the POWER button for 3 seconds again.

New and Special Color Effects

• The device offers two color effects: Luminous Green Color Effect and Film Color Effect. These effects are available in both normal mode and infrared night vision mode.
• To access the Luminous Green Color Effect, press the MENU button. To access the Film Color Effect, press the MENU button again. To switch back to the normal color mode, press the MENU button once more.

Display Selection

• After turning on the device, long press the MODE button for 3 seconds to switch the display to the single-sided display (left).
• Long press the MODE button for 3 seconds again to switch the display to the single-sided display (right). Long press the MODE button for 3 seconds once more to switch to dual display.

Adjusting the Display

• After turning on the device, press the MENU button to enter the menu. If the MENU font on the eyepiece/display screen is not clear enough, adjust the eyepiece diopter adjustment wheel until the MENU font looks clear.
• Press the MENU button again to exit the MENU.
• Then adjust the focus wheel to focus according to the actual distance of the viewed scene until the screen is displayed.
• The diopter can be adjusted separately by the two eyepieces.

Follow these steps:

1. After powering on, press the MODE button to switch to the left display screen alone.
2. Short press the MENU button to enter the menu.
3. Adjust the left eyepiece diopter adjustment wheel according to your needs until the menu display is the clearest. If you have myopia, adjust the eyepiece lens inward. If you have hyperopia, adjust it outward. For normal vision, adjust it to the middle position.

FAQ

Q: What is the maximum capacity of the memory card that can be inserted?

• A: The device supports Class 10 Micro cards with a maximum capacity of 32GB.

Q: How long does it take to fully charge the device?

• A: It takes approximately 4 hours to fully charge the device.

Q: Can I use any USB power adapter to charge the device?

• A: You need to use a universal USB power adapter with a DC 5V/2A output to charge the device.

Product Overview

15. View Area /display screen

Specification

• Photo Resolution: 【3M(2048×1536)】/【2M(1600×1200)】/【1M(1280×960)】/【VGA(640×480)】
• Video Resolution :【1080P(1920x1080P@30FPS )】 /【960P(1280 x960@30FPS )】/【VGA(640×480@30FPS )】
• Sensor: 1.3MP Starlight sensor
• Display Screen: The inner screen is 1.4” 390* 390 HD TFT, 7-level brightness adjustment, free switching between single and double screens, 7X magnification
• Eyepiece: Fully independent binocular technology, can independently adjust the vision compensation of left and right eyes (refractive adjustment range +/-3, both myopia, farsightedness 300 adjustment compensation)
• IR LED: 3W,850nm strong infrared spotlight,7 grades infrared adjustment.
• Lens： F1.4 larger aperture, f=25mm，FOV 10°
• Auto-off: 1 min/3 min/ 5 min/ OFF
• View Distance: 200m~250m full black observation distance, 1m~infinity low light observation distance
• Digital Zoom: Digital Zoom 4X
• Power Source: 3.7V, 3000MAH lithium battery
• Environment temperature: Operation temperature -10℃to + 50℃; storage temperature: -20℃ to +60℃
• Dimensions: approx. 152mm12255mm
• Weight: about 440g with battery

About Charge

• The device has a built-in rechargeable battery, please fully charge it before first use.
• Please use a universal USB power adapter (DC 5V/2A)(not included) to charge this machine.
• When charging, the charging indicator on the left side of the Micro USB port will turn red; when fully charged, the charging indicator will turn off.
• (If the machine is fully charged, it can be fully charged in about 4 hours.)

Inserting Memory Card

• Please prepare a Class 10 Micro card (up to 32GB) in advance.
• Open the card slot cover, you will see the card slot.
• Insert the Micro SD card into the slot. Make sure the direction is right. Never insert the card forcibly.
• Format the Micro SD card, this can improve the compatibility of the Micro SD card.
• To remove the card from the memory card slot of the device, press the edge of the memory card gently, the card will pop out. Then remove the card.
• Note: If the TF card is not inserted or the card is not inserted correctly, the prompt icon of the SD card and the number of photos or recording time will not appear on the screen when the machine is turned on.
• When pressing the shoot button, the prompt of “No card” will appear.

Basic operation

Turn On And Turn Off

• Long press the POWER button for 3 seconds to turn on the device. Long press the POWER button for 3 seconds again to turn off the device.

New and Special Color Effects:

• Luminous Green Color Effect and Film Color Effect. These 2 color effects are available in both normal mode and infrared night vision mode.

Steps:

• Long press “Menu” ->Luminous Green Color Effect, Long press “Menu” ->Film Color Effect,
• Long press “Menu” ->Get back to the normal color mode.

Display selection

• After you turn on the device, please long press the “MODE” button for 3 seconds to switch the display of the single-sided display (left) and then long press the “MODE” button for 3 seconds to switch the display of the single-sided display (right) and then long press the “MODE” button for 3 seconds to switch the dual display.

Adjust the display

• After you turn on the device, please press the MENU button to enter the menu. When you view the eyepiece/ display screen if the MENU font is not clear enough,
• Please adjust the eyepiece diopter adjustment wheel until the MENU font looks clear, press the
• MENU button again to exit the MENU. Then adjust the focus wheel to focus according to the actual distance of the viewed scene until the screen is displayed.
• The diopter can be adjusted separately by the two eyepieces, the specific steps are as follows:

1. After powering on, long press the MODE button to switch to the left display screen alone, short press the MENU button to enter the menu, and adjust the left eyepiece diopter adjustment wheel according to your needs until the menu display is the clearest (if you have myopia, The eyepiece lens is adjusted inward; if hyperopia, please adjust it outward, and normal vision is adjusted in the middle position);
2. Long press the MODE button again to switch to a separate display on the right side of the screen, short press the MENU button to enter the menu, and then adjust the refractive adjustment wheel on the right side of the eyepiece according to your needs to display the menu as clear as possible (adjust the eyepiece lens outside and inside, adjust the eyepiece lens outside for hyperopia, and adjust normal vision in the middle);
3. Press the MODE button again to switch to dual display, then aim at the viewing target and adjust the lens focusing wheel until the display is the clearest.

• If the light is insufficient or used at night, please press the IR Up/Zoom in/Up Button to turn on the infrared light and please select the IR gear according to the light at that time.
• The darker the light, the higher the gear adjustment. Long press the IR Up/Zoom in/Up Button to zoom.

Changing The Modes

The night version has 3 different modes: photo mode, video mode, and playback mode. Press the Mode button can change mode.

Taking pictures

1. Turn on the device, the default is Video mode. Please press the Mode button to switch to photo mode.
2. Zooming: Keep pressing the or button to zoom in or zoom out the image. the value of the magnification level appears on the LCD screen.
3. Take a still photo.

• View your subject via the LCD screen.
• Adjust the focus by turning the focus wheel.
• For night or insufficient light use, turn on the IR by pressing the IR Up/Zoom in/Up Button. Increase the brightness by pressing the button repeatedly.
• It has 7 levels of brightness(0〉1〉2〉3〉4〉5〉6〉7〉0…)The brightness can be adjusted according to your needs.
• The darker the light, the higher the gear adjustment.
• Press the Shot button to take a photo.

Recording Video

can be taken

| 6.| SD card prompt
7.| Digital zoom indication

1. Turn on the device, the default is Video mode. If not, press the Mode button to switch to Video mode.
2. Zooming : Keep pressing the or button to zoom in or zoom out the image. The value of the magnification level appears on the LCD screen.
3. Start to record the video.
   • View your subject via the LCD screen.
   • Adjust the focus by turning the focus wheel
   • For night or insufficient light use, turn on the IR by pressing the IR button. Increase the brightness by pressing the button repeatedly. It has 7 levels of brightness(0〉1〉2〉3〉 4〉5〉6〉7〉0…)
   • The brightness can be adjusted according to your needs, darker and more brightness.
   • Press the Shot button to start recording. The record duration will be shown on the LCD screen.
4. Finish recording.

• Press the Shot button again to stop recording.
• The device will stop recording automatically once the capacity of the memory card is full.

Notice: Device Power Off

1. If the device is fully charged and cannot be turned on or the screen cannot move during use and cannot be turned off, please insert a small hard strip such as a toothpick or wire into the RST hole, when you feel the resistance, press it and then turn it on.
2. Please use a universal USB power adapter (DC 5V/2A) (not included) to charge this device. After the MICRO USB is connected to the device when the red light of the charging indicator of the device is on, long press the power button to turn on the device and unplug the MICRO USB to turn off the device, which means that the built-in battery has no power and it needs to be fully charged or connected to an external mobile power supply.

Poor Image

• If you wear glasses, please keep them on while using the device.
• If at day, make sure the IR is off (if IR is on, the screen is black and white or the screen is colored)
• If at night, make sure you have turned on the IR, and press IR up (if IR is on, the screen is black and white).
• Adjust the focus by slowly turning the Focus wheel. Make sure it is focused.

IR – LED (Night vision function)

1. Regarding manual focusing: users can manually focus the focus wheel according to the actual observation distance to debug the best focus until the display is clear.
2. In photo/video mode, if you have to view the dark environment, please short press the IR UP button to activate the IR LED, and the image will change to black and white. The IR LED has seven levels, short press the IR UP button to up the level, short press the IR DOWN button to down the level. （If the battery voltage is not enough, the IR LED level will down automatically. IR level can be up to 7 levels when the battery power is full. If only the left half power, the level just be up to 5. If only 25% power, the level just can be up to 3. If the battery power is lower than 25%, IR LED cannot be activated.）

Settings in Photo and Video Mode

Press the Menu button in photo or video mode, can change the settings.

x 1200)] / [1M 1280×960] /[VGA 640×480]
Video Size| Set the video resolution.

Options:[FHD 1920X1080 ]/ [960 1280 x 960 ] / [640 640×480].

Night vision sensitivity| Choose the night vision sensitivity.

Options:[Low]/[Middle]/[High].

Display mode| Options:[Full]/[Normal]
Screen brightness| User can according to their need adjust the brightness of the LCD screen.

Options:[Level 1]/ [Level 2]/[Level 3]/[Level 4]/[Level 5]/[Level 6]/[Level 7].

Power Frequency| Set the light source frequency to match the frequency of the electricity supply in the local region to prevent interference.

Options:[50Hz]/[60Hz].

Power Save| Set the time to shut down the device for power saving if the device is idle.

Options:[3min]/[5min]/[10min]/[OFF].

---|---
Date&Time| Set the date and time of the device.
Date Stamp| Add the date stamp on the photo or video

files.Options:[Off]/[Date]/[Date&Time].

Language| Set OSD (on-screen) language. Options:[English]
Format| Format your TF card. Format TF card will delete all files including the protected files. Please copy the important files before confirming.Options:[Yes]/[No].
Reset All| Restore the setup to the factory default settings.Options:[Yes]/[No].
FW Version| Users can see the firmware version information.

Playback

1. Turn on the device, and press the Mode button to switch to playback mode.
2. Press the Up/Down button to view photos and video files.
3. Playback the video

• Press the Shot button to start playing the video files.
• Press the Shot button again to have a pause.
• Press the Menu button to stop the current video from playing. Press the Menu button in playback mode, the screen will display the playback menu.
• Press the Up/Down button to scan lock or delete. Press the Shot button to select one to enter the sub-menu.

Playback menu list:

Options:[Lock/Unlock onel]/[Lock All]/ [Unlock All].
Delete| Delete the current file or delete all files in the memory card.Options:[One]/[All].

Download files to PC

• There are two ways to download files from the device to a computer
• By inserting the memory card into a card reader.
• By connecting the device to a computer using the supplied USB cable.

Using a Card Reader

1. Eject the memory card from the device and insert it into a card reader. Then connect the card reader to a computer.
2. Open [My Computer] or [Windows Explorer] and double-click the removable disk icon that represents the memory card.
3. Copy images from the card into a directory of your choice on the computer’s hard disk.

Connecting the Device to a PC through the USB Cable

1. Turn on the night vision. Connect it to a computer through the supplied USB cable.
2. When connecting to the computer, it will appear “MSDC” on the screen.
3. Open [My Computer] or [Windows Explorer]. A”Removable Disk” appears in the drive list. Double-click the “Removable Disk” icon to view its contents. Files stored on the camera are located in the folder named “DCIM”.
4. Copy the photos or files to your computer.

NOTES on Cleaning

• Before cleaning the device, disconnect it from the power supply! Only use a dry cloth to clean the exterior of the device.
• To avoid damaging the electronics, do not use any cleaning fluid.
• Clean the eyepieces and/or lenses only with a soft, lint-free cloth, (e.g.microfibre cloth).
• To avoid scratching the lenses, use only gentle pressure with the cleaning cloth.
• Protect the device from dust and moisture. Store it in a bag or box.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>