HDHoliday 23PG90019 Christmas Tree Instruction Manual
- June 15, 2024
- HDHoliday
Table of Contents
Christmas Tree
Model: 23PG90019
Sku # 1005 271 539
Safety Information
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed,
including the following:
a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b. Do not use seasonal products outdoors unless marked suitable for indoor and
outdoor use. When products are used in outdoor applications, connect the
product to a Ground Fault Circuit
Interrupting (GFCI) outlet. If one is not provided, contact a qualified
electrician for proper installation.
c. This seasonal product is not intended for permanent installation or use.
d. Do not mount or place the product near gas or electric heaters, fireplaces,
candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for the night, or
if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire, burns,
personal injury and electric shock it should not be played with or placed
where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or light string.
k. Do not close doors or windows on the product or extensions cords as this
may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material that is not a
part of the product when in use.
m. The lamps of this product are not replaceable. Do not attempt to change or
modify the lamps.
n. Read and follow all instructions that are on the product or provide with
the product.
o. SAVE THESE INSTRUCTIONS
Pre-Assembly
Package Contents
| Part | Description | Quantity |
|---|---|---|
| A | Tree top | 1 |
| B | Tree center, Sticker 2 | 1 |
| C | Tree bottom, Sticker 1 | 1 |
| D | Tree stand | 1 |
Assembly
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand and lay the stand on the floor.
Step 3. Slide the locking disk of the tree stand down until it snaps into
place.
Assembling the tree
This tree assmbles with Quick Set® feature
—Set up and light up your tree in less than 10 minutes!
Step 1. Remove the protective caps from the tree bottom and insert the
pole into the tree stand.
Note: Do not step on the tree stand legs during the setup. This may
deform the tree stand and may result in an unbalanced tree.
Step 2. Continue by inserting the upper tree section(s) to the lower
section(s) until inserting the tree top.
Step 3. Shape the branches to your preference by working from the bottom
to the top. When adjusting branches, ensure that all wires are free of branch
hinges.
Step 4. Insert the adapter into the wall outlet. All your lights should
now be lit.
Step 5. Shape the tree from the bottom to the top. Start with the
branches farthest from the pole – fan out in a star shape, and continue until
the entire tree is shaped.
Step 6. When finished shaping the branches, slightly upsweep all branch tips for a uniform look.
Operation
Turning on the tree
Step 1. Connect the light strings of the tree together and plug the
adapter into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the On/Off button.
Maintenance
Spare parts
This tree package includes hinge pins, washers for any replacement or repair
that you need to perform on your tree. If extra parts are needed, contact the
Customer Service Team at 1-855-HDHoliday
(1-855-434-6543) from 8am to 7pm EST,
Monday through Friday, and 9am to 6pm EST, Saturday.
Repairing Loose Hinges
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the bracket and
secure with a washer.
Use and Care Instructions
- Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
- Before disassembling the tree, unplug the tree and remove all ornaments and decorations.
- Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole.
- Repeat this step for the center and bottom tree sections.
CAUTION:
To reduce the risk of fire and electric shock:
a) Use only the power supply that was provided with this product. Using a
different adapter will damage the lights and may cause fire, or electrical
shock hazards.
b) Do not install on trees having needles, leaves or branch coverings of metal
or materials which look like metal.
c) Do not mount or support strings in a manner that can cut or damage wire
insulation.
Troubleshooting
| Problem | Solution |
|---|---|
| The tree does not light | Ensure that all tree sections are plugged into each |
other and that the tree is plugged into the wall. If your tree came with a foot pedal, step on the On/Off button.
NEED HELP? DO NOT RETURN TO STORE.
CALL: 1-855-HDHoliday
(1-855-434-6543)
Monday – Friday 8am to 7pm EST, Saturday 9am to 6pm EST
Documents / Resources
|
HDHoliday 23PG90019 Christmas
Tree
[pdf] Instruction Manual
23PG90019 Christmas Tree, 23PG90019, Christmas Tree, Tree
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>