SADUENFR 800W Solar Street Lights Outdoor User Manual

SOLAR STREET LIGHT

800W Solar Street Lights Outdoor

Product Image| | | |
---|---|---|---|---
SKU| TK01| BM02| BM03| BC04
Light Emitting Diodes| SMD2835| SMD5730| SMD5730| SMD5730
Number of lamp beads| 1000pcs| 864pcs| 1152pcs| 800pcs
Battery Capacity| 18000mah| 24000mah| 30000mah| 30000mah
Lamp Size| 27.69.52 in| 23.613.43.5 in| 26.813.43.5in| 26.813.83.4 in
Item Weight| 7.2 lb| 9.4 lb| 11 lb| 10.1 lb
Advised Installation Height| 16-23ft| 16-23ft| 16-23ft| 16-23ft
Illumination Range| 1080-1620 sqft| 1080-1620 sqft| 1080-1620 sqft| 1080-1620 sqft
Waterproof Rating| IP65| IP65| IP65| IP65
Operating Temperature| -22°F-140°F| -22°F-140°F| -22°F-140°F| -22°F-140°F

Q: What are the installation requirements?

A: Make sure the solar panel faces the sun in order to

Wall mounting instructions

Mark the hole location where you want to mount.Drill 4 holes as per the location.| Knock the wall insert bolts into the wall and&lossen the srews nuts.

2.Mounting the bracket

Fix the bracket on the wall with screw nuts.| Adjust the angle of the lamp and fix it on the bracket.

• The short bolts are wall insert bolts.
• If you installthe light on a pole, please use the long bolts and black plate to fix it.
• It can be installed on a 4×4 in post.

Pole mounting instructions

Recommended pole diameter for installation 2-4 inches

|
---|---

1. Press the “OFF” button, turns off the lights and prevents them from automatically turning on the next day. To activate the lights, you must manually turn them on using the remote control or the switch button on the light body.
2. Press the “ON” button, Activate the light-sensing mode. It is programmed to turn on automatically at dusk and turn off at dawn. The device brightness is fixed at 100% and can only be adjusted using the remote control. In this mode, you can adjust the  brightness from 25% to 100% in increments of 25%.
3. Press the “WIFI” button, Activate the motion-sensing mode. It is programmed to turn on automatically at dusk and turn off at dawn. Maintain 30% brightness when no motion is detected. Automatically adjust to 100% brightness when motion is detected, and then return to 30% brightness 15 seconds after the person has left. In this mode, the dimming buttons cannot be used to adjust the brightness.
4. There are a total of 5 timing modes: 2H/3H/SH/6H/8H. Combined mode 1: Press the “ON” button to activate the light-sensing mode, then press the timing button. After the set time, the light will turn off. Combined mode 2: Press the “WIFI” button to activate the motion-sensing mode, then press the timing button. After the set time, the light will switch back to motion-sensing mode.
5. The light has a memory function and will repeat the mode used on the first night on the second night.

Widely used

Suitable for various scenarios including walls, poles, utility poles, squares, parks, gardens, yards, racecourses, barns, streets, walkways, pathways, farms, and ranches.
Notes:

1. FOR FIRST-TIME USE: The solar light needs to charge in full

2. Before using the remote control, please install two AAA batteries.

3.  REMOTE CONTROL FUNCTION
   Please press the “ON” button on the lamp first before using the control.

4. When the green light comes on, it means that the lamp is charging.sunlight for 6-8 hours.

After-sales service:

1. After-sales warranty: Provide after-sales warranty service, free repair or replacement of faulty parts within 1 year.
2. If you have any questions about installation and use, please feel free to contact me through Amazon.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>