SOYUS S00TYV10P2 Electric Hedge Trimmer Instruction Manual
- June 15, 2024
- SOYUS
Table of Contents
- About lithium battery hedge trimmer
- Safe warnings and precautions.
- Product manual
- Structure figure
- Scope of application
- Safety instructions
- Precautions
- Installation instructions & operation precautions
- Common faults & troubleshooting
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
New lithium battery hedge teimmer
Operating Manual
Hedge trimmer series
A new generation of energy-saving, environmentally friendly and efficient new
products
About lithium battery hedge trimmer
Thanks for choosing our environmentally friendly, efficient and portable lithium-ion hedge trimmer.This hedge trimmer is our company completely independently researches, develops, designs, and produces, the new generation of green, energy-saving and efficient produce series, in response to the national low carbon and environmental protection policy.This new product adopted fully matured technology which takes our company many years to develop, design, and prove through practical operation. The product is beautiful in design and easy to operate, suits for single person-machine operation.This product using green environmental-friendly energy can work in high efficiency. It is good helper in your gardens.
Safe warnings and precautions.
- The operator must operate in strict accordance with the instruction manual;
- It is forbidden to reach into the moving or rotating parts of the machine;
- Safety protection must be done before operation; .
- Please cut off the power supply in time when not using;
- Itis forbidden to use the machine against others during operation;
- Put safety protection warning labels on blades and other moving parts;
- It is forbidden to use in thunderstorm weather.
Product manual
This product is small in size, high in power, and adopts the current advanced brushless motor design. There are functions of low voltage, over current, and over temperature protection:
- Low voltage protection: When the battery is not charged in time,the machine is used for a certain period of time under the battery voltage.After falling to a certain level, the machine will not work.
- 0ver load protecttion: When the current rises, the machine will automatically shut down to prevent burn-in after reaching acertain level;
- Over heat protection: Continuous operation for a long time makes the electronic components on the controller hot, the controller will issue instructions for protection. After the electronic components cool down, the machine will return to normal. The lifespan of the motor will be greatly extended through the protection above.
Tips: Once the above protection program is activated, the machine will automatically stop. It can be used normally after restart.
Note: The positive and negative poles of the power supply for this product are prohibited to be opposite, otherwise it will burn motor controller. The plug N provided with this product is positive and the plug L is negative.
Structure figure
Scope of application
Lithium battery hedge trimmer is suitable for nursery, garden and community
greening. The machine is portable and efficient in use.
It will greatly reduce labor intensity.
Safety instructions
-
Please read the manual carefully detail by detail before use to avoid safety accidents.After reading, please keep the manual properly for emergency.
-
The following persons cannot use this machine
(1) Drunk people;
(2) Psychiatric patient;
(3) Children and pregnant women;
(4) People who cannot operate normally due to fatigue, illness, drug allergy,etc;
(5) People who cannot use machine due to unknown factors; -
Protection before operation
(1) Please wear slightly tight long-sleeved tops and trousers with tight cuffs during operation;
(2) Wear a cap with a brim and protective glasses;
(3) Please wear gloves during inspection and maintenance;
(4) Do not wear slippers, sandals, sliding soles and other shoes with potential safety hazards for operation.
The main technical parameters of the machine
Serial number | Function | Parameter value |
---|---|---|
1 | Machine weight (Kg) | 2.3kg |
2 | Voltage (V) | 18-21 |
3 | Power (W) | 0-500 |
4 | Rotating speed (r/min) | 0-1500 |
5 | Blade length (inch) | 22inch |
6 | Battery | Built-in/external plug-in optional |
7 | Cutting angle | 45° |
8 | Cutting rate | a95% |
Precautions
- Please check before operation. If necessary adjustments and abnormalities, please entrust the store to repair.
- Do not approach the fire source or wash the machine with water to avoid short circuit.
- The place to be checked before operation.
Inspection item | Inspection content | Solution |
---|---|---|
Exterior | Whether the exterior is damaged or loose | Repair or replace |
Fasteners | Whether it falls off or loosen | Fasten |
Blade | Whether the utter teeth are rounded. cracked. deformed | Replace |
Whetherlubrica the blatingoil de has | Oiling | |
Whether the blade tooth clearance and bite force are normal | Adjustment | |
Handle | Whether the handle is fixed | Adjustment |
Battery | Whether the battery has enough power | Must be charged after |
continuous work
Line connector| Whether the battery wiring connector is firm| Adjustment
Switch| Whether thegood power switch is| Repair or replace
Installation instructions & operation precautions
-
Installation instructions
1. Open the packing box and take out the bare metal;
2.Install the D-grip handle and safety guard, fix the handle with four screws;
3. Install a fully charged battery;
4. Remove the blade protection cover;
5. Press safety lock first, then press switch A and switch B at the same time to work.
Tips: You need to press the safety lock so that you can press switch
B. Safety lock will not reset unless switch B is released. So you don’t need to hold the safety lock when working.
6. Start working; -
Operation precautions
1. Adjust the blade gap regularly, and regularly oil and lubricate the blade within a certain period of time.
2. Keep your fingers away from the blade on the hedge trimmer to avoid injury;
3. It must be recharged after continuous work;
4. The warranty of this product is 1 year. Do not disassemble the machine by yourself, otherwise the warranty qualification will be lost;
5. When the power supply is not in use, it needs to be charged once a month;
6. Please turn off the power switch immediately after work. So as not to accidentally injure others or objects.
Common faults & troubleshooting
(1) If the load is too large, adjust the load into the rated use range;
(2) Check whether the battery connection line Is firm;
(8) Check whether the switch is in working condition;
(4) Check whether the battery is leaking;
If you have any other details or advice, please send a
message to the address below, and we will reply
within 24 hours.
support@elecicopo.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>