Ocean Loong AC68 1500W Space Heater and 38.6 Inch Bladeless Tower Fan Instruction Manual

Ocean loong Bladeless Purifier & Heater Fan

Operating Instruction

Thank you very much for using our products, please kindly read through the manual before Use

Introduction of Product fittings

1. Adjustable Tilt Direction
2. Output Channel
3. Outlet Circle
4. Main Body
5. Input Channel
6. 80° Head Swinging Device
7. Base

Voltage: 120V
Rating frequency: 50/60Hz
Power Rating:
Cool: 28W
Hot: 1500W
Sway angle: 80°
Tilt Head: 270°

Remote control & Touch screen button instructions

8. Power
9. Fan speed –
10. Heater/fan switch over
11. Timer –
12. Sway
13. Heater +
14. Fan speed +
15. Heater –
16. Max Speed
17.Timer +
18. Wind speed +
19. Wind speed –
20. Timer

Assembly Instructions

1. Aim the base at the body preparing to install.
2. Push the body to the base and rotate the body to left unit it clicks into the base.

Replacing the H13 HEPA Filter

1. Pull off the H13 HEPA net part.
2. Replace the new HEPA.
3. Assemble the net back.

Cool Mode

1. Press directly into cool mode
2. Press + or – into adjust wind power

Heater Mode

1. Press button then press button, hot/cool mode.
2. And press to change back to thenatural wind mode.
3. Ceramic Heater with adjustable Thermostat. You can set the temperature from 16°C to 37°C.
4. When the temperature reaches the setted degrees, it will automatically stand by and automatically turn on the warm air mode

Principle of air outlet

Our Bladeless Purifier and Heater Fan different with traditional fan , It through air cut prdouce natura wind ,natural wind is by the base with motor pulls in air, and the inlet air is pushed to the top blow ring effectively cooling the air, the high pressure air flows through the designed shape and high speed pushes input air.

Principle of Hot wind

PTC heating unit

When airflow go through PTC heating unit , airflow to get heating effect, thereby release hot wind.

Direction adjustment

Caution: Don’t push the outlet down to this section!

• According to the angle, you need to adjust the outlet. 270 degree adjusted.

Clearing blockage

• Ensure the heater is unplugged and has been allowed to cool. Look for blockages is the air inlet holes and in the small aperture inside the air loop amplifier. Use a soft brush to remove debris.

Cleaning

• Unplug from the mains electricity supply. Allow to cool for 1 to 2 hours before cleaning if the heater has been in use. To clean, wipe with a dry or damp cloth. Do not use detergents or polishes.

Matters needing attention

• This heater is hot when in use and for a short period after use. Do not let bare skin touch hot surfaces. If children are present, consider positioning the heater out of their reach.

Replace Battery

• Tear down the battery hatch cover, take out of used battery , then put the new battery instead of ,make battery bin is loaded in the positive & negative direction and close battery cover.

IMPORTANT SAFETY INSTRUCTIONS

BEFORE USING THIS APPLIANCE READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS MANUAL AND ON THE APPLIANCE.
When using an electrical appliance, basic precautions should always be followed including the following:

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1. This heater is hot when in use and for a short period after use. To avoid burns, do not let bare skin touch hot surfaces. When moving the heater hold it by the base, not the air loop amplifier
2. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains ,at least 0.9m (3 feet) from the front of the heater and keep them away from the sides and rear when the heater is plugged in
3. Extreme caution is necessary when any heater is used by or near children or infirm persons and whenever the heater is left operating and unattended.
4. Do not allow to be used as a toy. Close attention is necessary when used by or near young children, Children should be supervised to ensure that they do not play with the heater or remote control.
5. This heater and remote control are not intended for use by young children or infirm persons with reduced physical, sensory or reasoning capabilities, or lack of experience and knowledge, unless they hove been given supervision or instruction by a responsible person concerning use of the heater to ensure that they can use it safely.
6. The base must be fitted securely before operating. Do not dismantle or use without the base fitted.
7. Suitable for dry locations ONLY. Do not use outdoors or on wet surfaces. Do not use in bathrooms, laundry areas and similar indoor locations. Never locate the heater where it may fall into a bath or other water container. Do not use or store where it may get wet or in the immediate surroundings of a bath, a shower, or a swimming pool.
8. A heater has hot parts inside. Do not use it in areas where petrol, paint, or flammable liquids are used or stared or where their vapours are present. Do not use in conjunction with or directly next to an air freshener or similar products.
9. Do not locate directly below a mains electricity supply socket.
10. Always plug directly into a wall socket. Never use with an extension cable as overloading may result in the cable overheating and catching fire.
11. Do not handle any part of the plug or heater with wet hands.
12. Do not unplug by pulling on the cable. To unplug, grasp the plug, not the cable.
13. Do not stretch the cable or place the cable under strain. Do not run the cable under carpeting. Do not cover the cable with throw rugs, runners, or similar coverings. Do not route the cable under furniture or appliances. To avoid o tripping hazard arrange the cable away from traffic areas so that it will not be tripped over.
14. Do not use with a damaged cable or plug. If the supply cable is damaged it must be replaced by this company or its service agent or similarly qualified persons in order to avoid a hazard.
15. To disconnect the heater, turn the controls off, then remove the plug from the socket. Always unplug the heater when not in use.
16. Do not use if the heater malfunctions or has been dropped or damaged in any manner. Contact the this company Helpline or return to an authorized service facility for examination and/or repair.
17. To prevent a possible fire, do not use with any opening or exhaust blocked, and keep free of dust, lint, hair, and anything that may reduce airflow. Do not put any object into the inlet grill or the exhaust opening as this may cause an electric shock or fire, or damage the heater
18. Do not use on soft surfaces, such as a bed, where openings may become blocked.
19. Use only as described in this Operating Manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
20. In order to avoid overheating and fire hazard, do not cover the heater.
21. Choking hazard: the remote control unit contains a small battery. Keep the remote control away from children and do not swallow the battery. If the battery is swallowed seek medical advice at once
22. The heater should be positioned so the airflow is directed away from any walls or room corners.

IMPORTANT SAFETY FEATURES

For your safety this heater is fitted with automatic cut-out switches that operate if the heater tips over or overheats. If the switches operate, unplug the heater and allow it to cool. Before restarting the heater check and clear any blockages and ensure the heater is on a solid level surface

READ AND SAVE THESE INSTRUCTIONS

THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY

Do not pull on the cadle.

Do not store near heat sources.

Do not use near open sources.

Do not use carry by the air loop amplifier the air loop amplifies is not a handle.

In order to avoid overheating and fire hazard, do not cover the heater.

Reminder

If the instructions do not conform to the product, please refer to the actual operationl.
All righes of interpretation of this product belong to Dongguan Anzheluo Electrical Appliance Co., Ltd.

Name and content description of harmful sufstances in products

• This product meets the requirements of the ((Regulations on the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products))
• During the period of environmental protection use ,consumers will not have harmful substance leakage and precipitation during normal use, which will affect consumers’ health. We can rest assured that
• The environmental protection service life of our products will be 10 years. Only when this product is used under the normal conditions described in this specification can the” environmental protection service life” be effective.

Name and content identification of toxic and harmful substances or elements

Part name

| Toxi and harmful substances or elements
---|---
(Pb)| (Hg)| (cd)| (Cr(VI))| (PBB)|

(PBDE)

Resistor Component

| O| O| O| O| O| O
Capacitor Component| X| O| O| O| O|

O

High voltage Capacitor

| X| O| O| O| O| O
Circuit| O| O| O| O| X|

X

Circtit Board

| O| O| O| O| O| O
LED Display| X| O| O| O| O|

O

Solder

| X| O| O| O| O| O
Internal wiring| X| O| O| O| O|

O

Terminals

| O| O| O| X| O| O
Plastic case| O| O| O| O| O|

O

Spray paint

| O| O| O| O| O| O
Power cord| X| O| O| O| O|

O

Screw

| O| O| O| X| O| O
Fuse| X| O| O| O| O|

O

Temperature control switch

| O| O| O| X| O| O
PTC heating wire| O| O| O| O| O|

O

Main motor

| O| X| O| O| O| O
Swing head synchronous motor| O| O| O| O| O|

O

Remote control

| O| X| O| O| O| O
Label sticker| O| O| O| O| O|

O

This form is compiled in accordance with SJ/11364.
O: Indicates That the content of the toxic and harmful substance in all homogeneous materials of the component is below the limit specified in GB/T26572.
X: Indicates that the content of the toxic and harmful substance in at least one homogeneous material of the part exceeds the limit specified in GBT26572.
Note: Some of the parts marked “x” above contain harmful substances which exceed the standard due to the limitation of current industry technology level, and it is difficult to achieve substitution or reduction for the time being.

Ocean Loong Bladeless Purifier and Heater Fan are exempt from insurance for one year.
Terms and Conditions of One-year Warranty for your Bladeless Purifier and Heater.
The warranty clause shall come into force as of the date of purchase.
All warranty work will be performed by Ocean Loong OR its authorized agent.
Any replacement parts will be owned by Ocean Loong.
Under the warranty terms, repairment and replacement services cannot extend the warranty period. Please keep your purchase notes.
Before repairing your products, please provide your purchase notes. We will charge without this note.

Scope covered

Scope: within one year after purchase, defects due to poor materials, workmanship or functions need to be repaired and maintained (if there are no parts or production interruption, they will be replaced with practical parts).

Warranty card

Customer

|

Full name:

| |

Warranty Period One Years

---|---|---|---

Address:

|

Telephone:

|

Purchase Date:

|
1, The product will be free of charge within two years from the date of purchase.
2, If it is necessary to replace spare parts beyond the time limit specified in the preceding paragraph, the maintenance fee shall be charged as appropriate.
3, During the warranty period, free repairs are not allowed in the following circumstances
a, Failure to query purchase records or provide purchase information
b, Maintenance beyond warranty period.
c, Damage caused by disassembly or renovation.
d, Damage caused by misuse/negligence orimproper use.
e, Faults or damages caused by non-ordinary household use (e.g. long-term use in places with poor environment).
f, Those whose appearance is naturally stained by use.|

Examination clerk

|

Problem Description

|

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>