LEONC DESIGN F2047 Soft Light Floor Lamp Installation Guide
- June 15, 2024
- LEONC DESIGN
Table of Contents
F2047 Soft Light Floor Lamp
|
|
---|---|---
Tips: To avoid bending during installation, please ensure that the connection between the tubes is correct and tightened tightly.
INSTALLATION MANUAL
Installation Notes:
The installation process should be strictly followed by the installation
procedure and care should be taken not to require any heavy-force
operation. In particular, the installation of gasket and spring in steps
9 and 10 should be taken care to place them under the stents of the
lamp cover. Please ensure that the connection between the tubes are
correct and tightened tightly.
Maintenance of lampshade:
There may be wrinkles since it is in a combined folded state when
you receive it. Please don’t worry. After properly installed, the
pull wrinkle supported by the light stand will be reduced or even
eliminated. It is made of Tyvek (non-woven fabric), which is not easy
to deform, waterproof and mildew-proof, and can be wiped with a
damp cloth with an appropriate amount of detergent. Also keep an
eye out for your pets, they may be very interested in this fabric!
Light source power:
Max . 60W2; LED bulb (5~20W) 2.
Package Include:
lampshade1, supporting tubes and electric appliances suite1 (tube
A,B,C,D,E), the accessories bag1 (ball screw pipe(long)1, screw
pipe(short)1, spring1, gasket1, foot 4, tie1), bulb2.
Warning:
CAUTION: RISK OF FIRE – USE MAX 260W, 120V.
ATTENTION: RISQUE D’INCENDIE – UTILISEZ MAX 260W,120V.
DRY LOCATIONS ONLY
HOUSE HOLD USE
Designed and made by LEONC® Design
Copyright © 2014-2023 LEONC® Design Alll Rights Reserved
www.leonclighting.com
Need Help? Connect with us on support@leonclighting.com;
Or follow @LEONC lighting on Facebook Twitteréuinstagram
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>