Flycam FLCM-FLN-850N Flowline-X 850N Professional Stabilizer Instruction Manual
- June 15, 2024
- FLYCAM
Table of Contents
Flycam FLCM-FLN-850N Flowline-X 850N Professional Stabilizer
Flowline-X 850N Professional Stabilizer
Specifications
- Product Name : Flowline-X 850N
- Product Weight (Without Packing): 6.50Kg /14.3 lbs
- Height Mounted : 112 cm (44”)
- Load Capacity : 2-17kg/4.4-37.4lb
- Suspension line length : 107 cm (42”)
- Top Bar Length : 560mm
- Folded : 60 cm (23.6”)
- Vest Adjustment : 30” to 52”
Introduction
The Flycam Flowline-X 850N Professional Stabilizer is designed to provide
stable camera support for professional use. It is packed in a bag and comes
with the following items:
- Flycam Flowline
- 2 x Allen Keys Sizes (3mm & 6mm) With Rope
- 2 x Csk Bolts with 2 x Round Knob
Assembling of Your Flycam Flowline Camera Support
- Join section 1 of the support bar to section 2 using the push-fit technique.
- Wear the support jacket and tighten the buckles provided at the waist and chest. Adjust them according to your convenience.
- Adjust the side support bars to shift the weight to your shoulder and hips.
- Loosen the knob of the Hook and attach the camera to it. Tighten with the provided knob to ensure a slip-free connection. Leave a gap of approximately 2cm (1 inch) between the camera and the support arm.
Note : To adjust the height of the support bar, loosen the four knobs provided on the back of the support jacket.
Your Flycam Flowline-X 850N Professional Stabilizer All Dressed Up and
Ready to Go
(Shown with optional accessories)
Warranty
We offer a one-year warranty for our products from the date of purchase.
Within this period of time, we will repair it without charge for labor or
parts. Please note that the warranty does not cover transportation costs or a
product subjected to misuse or accidental damage. Warranty repairs are
subjected to inspection and evaluation by us.
Liability
We are not liable for damage caused by products that we do not supply or
from mishandling in transit, accidents, misuse, neglect, lack of care of the
product, or service by anyone other than our company.
Contact Us
In case of any kind of dissatisfaction, please contact us immediately, and
we promise our utmost support and care until you use our product.
FAQ
-
Q: How much weight can the Flycam Flowline-X 850N Professional Stabilizer support?
A: The Flycam Flowline-X 850N has a load capacity of 2-17kg/4.4-37.4lb. -
Q: How do I adjust the height of the support bar?
A: To adjust the height of the support bar, loosen the four knobs provided on the back of the support jacket. -
Q: What is the warranty period for the Flycam Flowline-X 850N Professional Stabilizer?
A: The Flycam Flowline-X 850N comes with a one-year warranty from the date of purchase. Within this period, we will repair it without charge for labor or parts, subject to inspection and evaluation by us.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted by any
form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
Flycam Flowline-X 850N Professional Stabilizer
INTRODUCTION
The Flycam Flowline-X 850N Professional Stabilizing System is a body-worn support system de-signed for cameras rigs between 2kg to 17kg. The versatile system ensures smoothness in your shots by controlling vibrations which come from walking or running. Ergonomically designed Flowline works by using a suspension line to support the weight of the gimbal rig, taking the load off of your shoulder, neck, and arm muscles, and distributing it across your torso. The tension line is adjustable by turning a screw in the back, letting you dial in the appropriate amount of tension for your rig. It gives you the speed and mobility of a handheld camera, while still achieving steady shots from the shoulder, the hip, or knee level.
WHAT’S IN THE BOX
Please inspect the contents of your shipped package to ensure you have
received all that is pictured and listed below.
You will receive Flycam Flowline packed in bag. Open the bag and take out the Flycam Flowline.
ASSEMBLING OF YOUR FLYCAM FLOWLINE CAMERA SUPPORT
- Join section 1 of support bar to section 2 with simple push-fit technique.
- Wear support jacket and tighten the buckles provided at the waist and at the chest and adjust as per your convenience.
- By adjusting side support bars, the weight will be shifted to your shoulder and hips.
- Loosen the knob of Hook and attach the camera to it. Tighten with provided knob to ensure slip free connection.
Note: Leave a gap of approx. 2cm (1 inch) between the camera and the support arm
NOTE : Loosen the four knobs provided on the back of support jacket for height adjustment of support bar.
YOUR FLYCAM FLOWLINE-X 850N PROFESSIONAL STABILIZER ALL DRESSED UP AND READY TO GO
(SHOWN WITH OPTIONAL (ACCESSORIES)
Warranty
We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability : We are not liable for damage caused by products that we do
not supply or from mishandling in transit, accident, misuse, neglect, lack of
care of the product, or service by anyone other than our company.
Contact Us : In case of any kind of dissatisfaction, please Contact us
immediately and we promise our utmost support and care until you use our
product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>