FURNLITE FC-504 Touch Switch Instructions
- June 15, 2024
- FURNLITE
Table of Contents
FURNLITE FC-504 Touch Switch
Installation Instructions
Intended Use – This switch harness has been designed for installation and use inside cabinets of furniture.
Warnings
- This switch harness is not designed nor should it be used for illumination of aquariums.
- This switch harness is not designed nor should it be used for illumination in plastic cabinets. Improper installation or using light fixtures with a total wattage of more than the maximum of 300 watts listed or a different type of fixture may result in fire, electrical shock, and other hazards.
Installation – The switch harness has been designed to be mounted in the
TOP / BACK / BOTTOM of a cabinet or furniture. The switch harness has been
provided with mounting holes. After the fixture is placed or installed
(mounted), it should be secured with a minimum of two wood screws. Switch
harnesses may be provided with various types of switches. Care should be used
during installation and use to prevent any damage to the power supply cord,
polarized plugs, power cord, or harness fixture itself. ANY switch harness
which has visible damage should not be installed. (Contact the manufacturer
for disposal /replacement instructions). This harness fixture has been
designed for open or closet-top cabinets.
NO attempt should be made to modify or repair this switch harness. (Contact
manufacturer for instructions). This harness fixture has a MAXIMUM WATTAGE
label applied to it. It is the installer’s responsibility to ensure that this
label is visible to the end user (customer/owner).
Installation Precautions
- Use only insulated staples or plastic ties to secure cords.
- Route and secure cords so that they will not be pinched or damaged when the cabinet is pushed to the wall.
- Do not conceal a power supply cord (or power supply) inside a wall, ceiling, soffit, kitchen cabinet, or similar permanent structure.
- Do not run the power supply cord through homes in walls, ceilings, or floors.
The instructions shall identify the manufacturer and model designations of the intended portable cabinet light.
Specifications
| FC-100 Series | FC-200 Series | FC-300 Series | FC-400 Series |
|---|---|---|---|
| GR 3290 | HW 3290 | TV 3290 | AG 3290 |
| TV 3290 | AG 3290 | C 3290 | T 3290 |
| C 3290 | T 3290 | TC 3290 | EA 3290 |
| TC 3290 | EA 3290 |
SAVE THESE INSTRUCTIONS
The information contained in these instructions is mandatory for this harness fixture to comply with Underwriters Laboratories’ requirements. Failure to comply with these, by the installer, will render the products listing null and void.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Product Information
The Portable Cabinet Light Accessory is a switch harness designed to provide illumination for cabinets. It should not be used for aquariums or plastic cabinets. The maximum wattage for this switch harness is 300 watts.
Specifications
- Model: FC-100 Series, FC-300 Series, GR 3290, TV 3290, C 3290, TC 3290, FC-200 Series, FC-400 Series, HW 3290, AG 3290, T 3290, EA 3290
- Maximum Wattage: 300 watts
Product Usage Instructions
Installation
- Use only insulated staples or plastic ties to secure cords.
- Route and secure cords in a way that they will not be pinched or damaged when the cabinet is pushed against the wall.
- Do not conceal the power supply cord (or power supply) inside a wall, ceiling, soffit, kitchen cabinet, or similar permanent structure.
- Do not run the power supply cord through walls, ceilings, or floors.
Maintenance
Do not attempt to modify or repair the switch harness. Contact the manufacturer for instructions if any issues arise.
Safety Warnings
- This switch harness should not be used for illumination in aquariums or plastic cabinets.
- Improper installation or using light fixtures with a wattage exceeding the maximum limit of 300 watts may result in fire, electrical shock, and other hazards.
Label:
Ensure that the MAXIMUM WATTAGE label is visible to the end user (customer/owner) during installation.
FAQ
Q: Can I use this switch harness for illuminating an aquarium?
- A: No, this switch harness is not designed or intended for use in aquariums.
Q: What is the maximum wattage allowed for this switch harness?
- A: The maximum wattage allowed for this switch harness is 300 watts.
Q: Can I run the power supply cord through walls or ceilings?
- A: No, the power supply cord should not be run through walls, ceilings, or floors.
Q: Can I modify or repair the switch harness myself?
- A: No, do not attempt to modify or repair the switch harness. Contact the manufacturer for instructions.
Q: What should I do if I have any issues with the switch harness?
- A: If you encounter any issues with the switch harness, please contact the manufacturer for further instructions and assistance.
What is the intended use of the switch harness?
- The switch harness is designed for installation and use inside cabinets of furniture.
Can this switch harness be used for aquarium lighting?
- No, it is not designed for the illumination of aquariums.
Is it safe to modify the switch harness?
- No attempt should be made to modify or repair the switch harness. Contact the manufacturer for instructions.
What should be done if the equipment causes interference with radio or television reception?
- The user should try to correct the interference by reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment into a separate outlet, or consulting a professional for help.
PORTABLE CABINET LIGHT ACCESSORY.
Installation Instructions
- Intended Use – This switch harness has been designed for installation and use inside cabinets of furniture.
- WARNING: This switch harness is not designed nor should it be used for illumination of aquariums.
- WARNING: This switch harness is not designed nor should it be used for illumination in plastic cabinets.
- Improper installation or using light fixtures with a total wattage of more than the maximum of 300-watt listed or a different type of fixture may result in fire, electrical shock, and other hazards.
- Installation – The switch harness has been designed to be mounted in the TOP / BACK / BOTTOM of a cabinet or furniture.
- The switch harness has been provided with mounting holes. After the fixture is placed or installed (mounted), it should be secured with a minimum of two wood screws. Switch harnesses may be provided with various types of switches. Care should be used during installation and use to prevent any damage to the power supply cord, polarized plugs, power cord, or harness fixture itself.
- ANY switch harness which has visible damage should not be installed. (Contact the manufacturer for disposal /replacement instructions). This harness fixture has been designed for open or closed top cabinets.
- NO attempt should be made to modify or repair this switch harness. (Contact manufacturer for instructions).
- This harness fixture has a MAXIMUM WATTAGE label applied to it. It is the installer’s responsibility to ensure that this label is visible to the end user (customer/owner).
- Use only insulated staples or plastic ties to secure cords.
- Route and secure cords so that they will not be pinched or damaged when the cabinet is pushed to the wall.
- Do not conceal a power supply cord (or power supply) inside a wall, ceiling, soffit, kitchen cabinet, or similar permanent structure.
- Do not run the power supply cord through homes in walls, ceilings, or floors.
The instructions shall identify the manufacturer and model designations of the intended portable cabinet light.
- FC-100 Series FC-200 Series
- FC-300 Series FC-400 Series
- GR 3290 HW 3290
- TV 3290 AG 3290
- C 3290 T 3290
- TC 3290 EA 3290
SAVE THESE INSTRUCTIONS
- The information contained in these instructions is mandatory for this harness fixture to comply with Underwriters Laboratories’ requirements.
- Failure to comply with these, by the installer, will render the products listing null and void.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PO Box 159 Fallston, NC 28042 p. 704-538-3193 f. 704-538-0386 Suppliers To The Furniture & Related Industries www.furnlite.com
Documents / Resources
|
FURNLITE FC-504 Touch
Switch
[pdf] Instructions
WZA-FC-504, WZAFC504, FC-504, FC-504 Touch Switch, Touch Switch, Switch
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>