Newland FM430 Fixed Mount Barcode Scanner

Product Description

FM430

Connecting to the Host with USB Cable

Note: The host refers to a PC, POS, or other terminal equipment.

Connecting to the Host with RS-232 Cable (optional)

Scanning instructions

Sense scan mode (default)

1. Connect the scanner to a host with the cable.
   Then the scanner will be powered on.

2. Position the barcode on mobile phone screen or paper in the center of the scan window.

3. For a good read, the green good read LED on the scanner will flash once.

Barcode Programming

1. Enter/ Exit setup

SETUPE1

|

SETUPEO

---|---

**Exit setup / Enter setup

2. Factory default
   
   @FACDEF
   Restore all factory defaults

3. Beeps

   ---

@PWBENA1

|

@PWBENAO

---|---

**Power-on beep on / Power-on beep off

@GRBENA 1

|

@GRBENAO

---|---

** Good read beep on / Good read beep off

4. Terminating character suffix

@TSUENA1

** Enable terminating character suffix

@TSUENAO

Disable terminating character suffix

~~~~@TSUSETOD

** Set terminating character suffix to CR (0x0D)

@TSUSETODOA

Set terminating character suffix to CRLF (0x0Dx0x0A)
Note: Asterisks(**) indicate factory default values.

Troubleshooting

When the scanner is not working, please:

1. Ensure that all cable connections are secure and that only the supplied cables are used.
2. Ensure that the screen backlight is on when reading digital barcodes off a mobile phone and that the barcode is not defaced when reading it on paper. Wrinkled, soiled, or torn barcodes might be unreadable.
3. Ensure that the barcode type is enabled.

Customers Support

Visit our website
newland-id.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>