VUZIX 515 Smart Glasses User Manual
- June 15, 2024
- VUZIX
Table of Contents
VUZIX 515 Smart Glasses User Manual
IMPORTANT
Please read the included Safety & Warranty document before using this device.
INSTRUCTION
Conformity to International Regulations for Sunglasses
This product meets the essential requirements of the Regulation (EU) 2016/425.
The following harmonized standard applied: EN ISO
12312-1:2013 + A1:2015. The lenses meet ANSI
Z80.3 1996 [normal] or [strictest] UV blocking
requirements.
Conformity declaration available online at:
https://www.vuzix.com/pages/lega
How to Use the Product as Sunglasses
Protection against the risk of damage to the eyes due to exposure to sunlight. Category and type of filter can be found on the package bar code label. The number indicates the category of the filter. This number indicates the filter in bright light. Please see Table 1 for an explanation of the protection based on sunglasses category.
Filter category| Description| Usage| Additional required
information| Symbol
---|---|---|---|---
0| Light tint sunglasses or fashion spectacles| Very limited reduction of
sunglare Some UV protection| | IEC 00417-5955
1| Limited protection against sunglare Some UV protection| Not suitable for
driving in twilight or at night; OR not suitable for driving at night or under
dull light conditions| ISO 7000-2948
2| General purpose sunglasses| Good protection against sunglare Good UV
protection| ISO 7000-2949
3| High protection against sunglare Good UV protection| | ISO 7000-2950
4| Very dark special purpose sunglasses – very high sunglare reduction| Very
high protection against extreme sun glare, e.g. at sea, over snowfields, on
high mountains, or in desert Good Unprotections| Not suitable for road use and
driving| ISO 7000-2951
Limitations of Use
-
Not for direct observation of the sun.
-
Not for protection against artificial light sources, e.g. solaria, sun lamps, lasers, etc.
-
Never stare directly at the sun or at an eclipse with or without sunglasses.
-
Not for use as eye protection against mechanical impact hazards. Sunglasses are not intended for industrial safety eyewear or hish-risk impact sports participants.
-
Not suitable for welding purposes. Lenses in sunglasses must meet applicable federal requirements for impact resistance but they ARE NOT SHATTERPROOF.
This product is not fire resistant. -
Not suitable FCC Information
FCC Information
Specific Absorption Rate
According to FCC 447498 D01 General RF Exposure Guidance v06, this product is excluded because it is under the threshold . A SAR evaluation is not required.
CE Countries : Frequency Range
BLE: 2402-2480 MHz RF-Output Power
BLE: -7.83 dBm (max)
Vuzix Corporation
25 Hendrix Road
West Henrietta NY 14586 USA UK Importer
Vuzix Europe Limited
Farview House, 10 Norreys Road,
Cumnor, Oxford, OX2 9PT
Vuzix Europe GmbH
Mousa cheer Strasse 82a
80809 Munich, Germany
Model 515
©2023 Vuzix Corporation. These instructions are subject to change. All trademarks belong to the respective owners.
515PB0004 (0001) Z100 USER MANUAL
Charging
To charge the device, use the supplied cable to connect the magnetic charging terminal to a USB 5V power source. The LED will illuminate red while charging and turn off when charging is complete.
Vuzix smart glasses ship with a partial charge. It is recommended that the battery be fully charged for first time use.
| Power Button | Glasses Display |
|---|---|
| Short PressWake or Sleep the device |
Press & Hold, 3 secondsHold until LED is solid white and power icon
displays.Device disconnects and shuts down.|
Press & Hold, 8 secondsHold until LED is solid blue and Bluetooth icon
displays.Device enters pairing mode.|
Press & Hold, 12 secondsHold until LED blinks white and the reset icon
displays.Device performs factory reset.|
Parts Description
Vuzix Connect App
Notification and display settings are managed on your mobile device within the
Vusi Connect app, available for iOS and Android. Scan the code below to
install on your mobile device.
ios
Android
| Bluetooth Connection | Glasses Display |
|---|
On bootup, the glasses will search for a previously paired mobile device and
the LED will light solid green when powered on and searching.|
To enter pairing mode, press and hold the power button for 8 seconds until the
LED turns blue, then release.
The LED will blink blue while the glasses are pairing.
The name of the glasses will be displayed. Select this name on the mobile
device in the Connect app.|
When a successful connection is made, the LED will light solid blue for a few
seconds and the phone name will display.|
Temple Touch
Some functions allow interaction by a finger touch to the outside of the temples.
Adjusting Fit & Display
The image in the glasses can be adjusted vertically by pinching or spreading the nose bridge. The location of the text in the display can be adjusted within the Vuzix Connect app in the Settings tab.
Support
For further documentation and the latest information scan the QR code or
visit:
https://www.vuzix.com/pages/support
Cleaning
Treat your smart glasses as you would any quality eyewear. It is mostly maintenance free and only requires to be wiped down periodically, using only a microfiber cloth to clean the device.
Caution: Do not spray with cleaners. If required, use microfiber cloth
moistened with standard eyeglass cleaner. Avoid spills. Solvents, household
cleaners and paper towels should never be used on your device.
Caution: This device is not water resistant. Avoid submerging or exposure
to moisture. Excessive moisture will damage the device.
Caution: Do not pack loose objects with the smart glasses while storing.
Loose objects may cause damage to the device.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void
the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Innovation, Science, and Economic Development Caned license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>