Kasco J-Series Fountains Premium Nozzles Instruction Manual

: June 15, 2024
: Kasco

Table of Contents

Kasco J-Series Fountains Premium Nozzles
Product Information
Product Usage Instructions
FAQ (Frequently Asked Questions)
INSTALLATION INSTRUCTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Kasco J-Series Fountains Premium Nozzles

Product Information

Specifications:

Product Name: Premium Nozzles
Compatible with: Large J Series Fountains
Manufacturer: Kasco Marine
Contact Information: 800 Deere Rd. Prescott, WI 54021 | 715.262.4488 | [email protected] | kascomarine.com

Product Usage Instructions

Installation Instructions for Premium Nozzles – Large J Series Fountains:

Before installing the new nozzle, ensure that the nozzle O-ring (A) is properly seated in its groove.
Twist the nozzle clockwise (as viewed from the top) to lock the flanges in place on the top of the pump chamber by hand.
Continue twisting until the nozzle flanges can move no further and are completely snug.
Nozzles can be changed conveniently without removing the float or using any tools.
If you find it difficult to twist the nozzle into place, you can apply dielectric grease to the nozzle O-ring for easier installation.
For easy installation in the future, use the provided tool by snapping it onto the nozzle ridges as close to the base as possible. Leave the tool in place for future nozzle changes.
The fern nozzle does not require a tool. Simply twist and lock it into place.

Retaining Clip Installation Instructions:
Note: The retaining clip is included in this kit to prevent possible rotation of the nozzle when the fountain is running.

If the nozzle ring is metal, position the clip with the side marked “up” facing upwards. If the nozzle ring is plastic, position the clip with the side marked “up” facing upwards.
Insert the clip into one of the aligned gaps in the nozzle and ring.
Twist the bottom of the clip over the ring.
Snap the clip into place to secure it.

FAQ (Frequently Asked Questions)

Q: Can I change the nozzle without removing the float or using any tools?
A: Yes, the Premium Nozzles can be conveniently changed without removing the float or using any tools.
Q: What should I do if I find it difficult to twist the nozzle into place?
A: If you find it difficult to twist the nozzle into place, you can apply dielectric grease to the nozzle O-ring for easier installation.
Q: Is a tool provided for easy installation?
A: Yes, a tool is provided. You can snap it onto the nozzle ridges as close to the base as possible for future nozzle changes.
Q: How do I install the retaining clip?
A: To install the retaining clip, follow these steps:

1. Position the clip with the correct side up based on whether the nozzle ring is metal or plastic.
2. Insert the clip into one of the aligned gaps in the nozzle and ring.
3. Twist the bottom of the clip over the ring.
4. Snap the clip into place to secure it.

INSTALLATION INSTRUCTIONS

PREMIUM NOZZLES
After removing the current nozzle and ensuring that the nozzle O-ring (A) is properly seated in its groove, twist the nozzle clockwise (as viewed from the top) so that the flanges in the nozzle lock into place on the top of the pump chamber by hand. Twist until the nozzle flanges can move no further and are completely snug. Nozzles can be changed conveniently without removing the float or using any tools.
NOTE: If it is difficult to twist the nozzle into place, dielectric grease can be applied to the nozzle O-ring.

For easy installation, use the provided tool. Snap it onto the nozzle ridges as close to the base as possible. Leave the tool in place for future nozzle changes.

NOTE: Fern nozzle does not require tool. Simply twist and lock into place.

This kit includes a retaining clip which you can install to prevent possible rotation of the nozzle when the fountain is running. See instructions on the opposite side of this sheet.

RETAINING CLIP