Maidian WJ01 Mini Camera User Guide
- June 15, 2024
- Maidian
Table of Contents
Mini Camera
User Guide
WJ01 Mini Camera
-
Download APP and install
A. Make sure your mobile device can connect to network
B. Tuya smart ip camera support “Tuyasmart” and “Smartlife” APP, you can find in APP store or scan QR code to download; for first time to use, please register first , please login if you already have account
C.Please note:” Tuyasmart” and “Smartlife” cannot connect same device
https://smartapp.tuya.com/tuyasmart
https://a.app.qq.com/o/simple.jsp?pkgname=com.tuya.smartlife&from=timeline -
Check wireless network
Check DHCP function of router are ok, and under 2.4 GHz. (5GHz co not support)
Make sure your smartphone are connected to network. -
Connection setting
Step1: open Tuya smart APP home page , click “+” onupperright comer. (pict )
Step 2:on “security&sensor” page choose “smartcamera’” . (pic2)
Step 3:on add device page, make sure the camera are
power on and have prompt tone “Ding ding ding” are heard ( pic3)} , Note: For
some device do not have speaker, watch the blue light stay on means network
configuration success if not heard, please press “Reset” about 8s to reboot
device, then start again
Step 4:Inout password of your WIFI, dick “confirm” (pic4) , show scan with the
camera , click “continue” (picS ) (Note: WIFI name and password do not support
special character)
Step 5, show QR
code target in front of camera about 20~30em, heared “Ding” sound, click
“heared the beep” ; ( picS ) showing connecting, connection success when
process to 100% (pic7 ) (Note: for some device do not have speaker, watch the
blue light stay on means network configuration success)
Step 6 you can remote view and set alarm, 2 way speak
or playback ( pic8 ) ;
Click Upper right comer “- – – “can check device info and basic setting ( pic9
)
Thank you for
choose our smart camera , hope you will have great experience with it ; if you
have any question or advise about it, welcome to give us feedback .
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
FCC RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.