XIUYI Woodworking Bearing Wheel Pressure Feeder Instruction Manual
- June 15, 2024
- XIUYI
Table of Contents
XIUYI Woodworking Bearing Wheel Pressure Feeder
Product Information
Specifications
- Brand: XIUYI
- Product Model: XY-Y002
- Net weight: 566.8g
- Gross weight: 640.8g
- Product Name: Woodworking limit backer
- Material: Aluminum alloy
- Scope of application: Carpenter’s scope to use
- Packing size: 20016050mm
- Product size:
- 163mm(6.4in)
- 37mm(1.46in)
- 46mm(1.8in)
- 78mm(3.07in)
- 8mm (0.314in)
- 138mm(5.43in)
- 78mm(3.07in)
- 143mm(5.63in)
- 9mm (0.35in)
- Stretched the distance (wheel nut): the total length of 155 mm/6.1in
Product Usage Instructions
Adjustable Distance (01)
The top two guide bearings drive the blank before it goes into effect,
making your blank easily move fluidly during the process.
Sliding Joint Design (02)
The product has a stable inward and outward adjustment and can be locked
firmly in place. It is specially designed for precision cutting and prevents
any lateral movement.
Operation Display (04)
The product is suitable for 3/4 standards of 3/8 of an inch incision and 30
mm x T slot track. It can be used with most standard table saws, routers, and
band saws.
Set the Width of Your Keeper Piece
1. Determine the desired width of your keeper piece.
2. Position and adjust the whole sheet saw jig, roller, and blade to achieve the precise distance.
3. Lock the sawing plate fixture in place.
Warning: The saw jig plate must always be located after the blade as shown.
Note: Always close and disconnect the machine power supply before making any adjustments to the fixture, jig, or supporting products.
Place Workpiece Against the Fence
- Position the workpiece against the fence.
- Slide the fences and artifacts to the sawing plate fixture until the workpiece contacts the roller on the fixture.
- Lock the table saw fence securely.
Note: Always close and disconnect the machine power supply before making any adjustments to the fixture, jig, or supporting products.
Make the Cut
- Ensure you have read and fully understood the attached instructions before using the sheet saw jig.
- Follow through with the cut until you have completely cut your timber.
Note: Always turn off the electric saws and disconnect them from the power supply connection after use.
Follow Through
- Before using the sheet saw jig, be sure to read and fully understand the attached instructions.
- Follow the instructions carefully to ensure proper usage.
FAQ
Q: What materials can the woodworking bearing wheel pressure feeder be used
with?
A: The woodworking bearing wheel pressure feeder can be used with various
materials, including wood, plastic, and metal.
Q: Can I use the woodworking bearing wheel pressure feeder with a handheld
router?
A: No, the woodworking bearing wheel pressure feeder is designed to be
used with table saws, routers, and band saws.
Q: Is the woodworking bearing wheel pressure feeder adjustable?
A: Yes, the woodworking bearing wheel pressure feeder has an adjustable
distance and sliding joint design for precise cutting.
WOODWORKING BEARING WHEEL PRESSURE FEEDER
ADJUSTABLE DISTANCE
The top two guide bearing, drive the blank before into effect,make your blank easily in the process of moving fluid
SLIDING JOINT DESIGN
Has the stable inward and outward adiustment and lock and firm, not from side to side, specially designed for precision cutting
PRODUCT ACCESSORIES
SPECIFICATION
- Brand: XIUYI
- Net weight : 566.8g
- Pr oduct Name : Woodworking limit backer
- Material : Aluminum alloy
- Scope of application: Carpenter’s scope to use
- Packing size: 20016050mm
- product size : See the size shown below
- Product Model: XY-Y002
- Gross weight: 640.8g
Stretched the distance (wheel nut) : the total length of 155 mm/6.1in
OPERATION DISPLAY
Suitable for 3/4 standards of 3/8 of an inch incision and 30 mm x T slot track,but with most standard table sawrouter and band saw.
STEP 1
SET THE WIDTH OF YOUR KEEPER PIECE
Once you determine your width,position, adjust the whole sheet saw jig, roller
and the blade precise distance, sawing locking plate fixture.
Warning:
saw jig plate must always be located in after the blade as shown
Always close and disconnect the machine power supply, and make any adjustments fixture jig or supporting products
Before using sheet saw jig, please be sure to read and fully understand and follow the attached instructions
STEP 2
PLACE WORKPIECE AGAINSR THE FENCE…
And then sliding fences and artifacts to sawing plate fixture, until the
workpiece sawing plate fixture roller contact.
Lock table saws fence well.
Before using sheet saw jig, please be sure to read and fully understand and
follow the attached instructions
Always close and disconnect the machine power supply, and make any adjustments fixture jig or supporting products
STEP 3
Once you set the width, wood sawing plate fixture and locked in place
MAKE THE CUT
Before using sheet saw jig,please be sure to read and fully understand and follow the attached instructions
STEP 4
FOLLOW THROUGH
Until you are completely cut your timber turn off the electric saws and saw
disconnected from the power supply connection
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>