Ledinaire WT065C G3 Waterproof Luminaire Installation Guide
- June 15, 2024
- Ledinaire
Table of Contents
- WT065C G3 Waterproof Luminaire
- Product Information
- Specifications
- Product Usage Instructions
- Installation
- Non-Emergency Wiring
- Emergency Wiring
- Luminaire Closure
- Can I replace the light source in the luminaire myself?
- Can I install the luminaire in a location exposed to direct
- Is the emergency pack included with the luminaire?
- Can I combine through wiring with an EM pack installation for
WT065C G3 Waterproof Luminaire
Product Information
Specifications
- Model: WT065C G3
- Light Source: LED
- Power Supply Unit: PSU
- Luminaire Length: L1200, L1500
- Emergency Module: EM300V (optional)
- Rating: IP65
Product Usage Instructions
Installation
The luminaire should be installed by a qualified electrician and
wired according to the latest IEE electrical regulations or
national requirements.
Environment Restrictions
-
Do not store, install, or use the luminaire in a corrosive
environment with hazardous substances such as sulphur, chlorine,
phthalates, etc. -
Avoid locations with conductive dust or heavy grease,
especially mineral oil or distillates like petroleum. -
This product is not suitable for cold and humid storage areas
with obvious temperature gradients. -
Avoid direct sunlight exposure as UV radiation can damage the
material and compromise the waterproof sealing and IP65
rating.
Safety Precautions
- Do not stare directly into the LED light beam to prevent eye
strain or damage.
Non-Emergency Wiring
1-1: Surface Mounted
1-2: Luminaire Opening
1-3: Wiring from the Side
Emergency Wiring
2-1: Luminaire Opening (No test button to be
installed)
2-2: Option with Additional Emergency Module
EM300V
Emergency Module: Follow the manual
instructions of EM300V Order Code: 912401483460 EM300V ELP3 kit HV
6.4V 2000mAh LFP. The emergency pack is not provided.
2-3: TW Optional
Luminaire Closure
4: Close the Luminaire
Diagonal Mounting: Remove the foil before
closing the luminaire.
FAQ
Can I replace the light source in the luminaire myself?
No, the light source should only be replaced by the
manufacturer, their service agent, or a qualified person.
Can I install the luminaire in a location exposed to direct
sunlight?
No, direct sunlight exposure can damage the material and
compromise the waterproof sealing and IP65 rating.
Is the emergency pack included with the luminaire?
No, the emergency pack is not provided. If you require an
emergency module, follow the instructions for the optional EM300V
module.
Can I combine through wiring with an EM pack installation for
emergency wiring?
No, through wiring cannot be combined with an EM pack
installation for emergency wiring.
WT065C G3 LED24S/840 PSU L1200 ELR BN WT065C G3 LED48S/840 PSU L1200 ELR BN WT065C G3 LED35S/840 PSU L1500 ELR BN WT065C G3 LED68S/840 PSU L1500 ELR BN WT065C G3 LED74S/840 PSU L1500 ELR BN
2x 2x 2x 2x 2x 1x
1.2 1.2 1.45 1.45 1.45
-The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
-Do not store/install/use the luminaire in corrosive environment with hazardous substances, e.g., sulphur, chlorine, phthalates etc.,or on the location where it is exposed to conductive dust, heavily grease (esp. mineral oil or distillates, e.g., petroleum), heavily naphthenic treated with hydrogen.
-This product is not suitable for cold & humid storage areas, especially where obvious temperature gradients are present, such as ventilation opening, door, etc.
-Do not install the luminaire on the location where it is exposed to direct sunlight. UV radiation will damage the material over time, resulting in loss of waterproof sealing and IP65 rating.
-Do not stare into LED light beam.
Non emergency wiring 1-1: Surface Mounted
1-2: Luminaire opening
6mm
1-3: Wiring from the side
Brown
N
L L1
2-1: Emergency wiring Luminaire opening
Emergency LED installation
Emergency installation
No test button to be installed.
2-2: (option with additional emergency module EM300V)
Emergency Module: Follow manual instruction of EM300V Order Code: 912401483460
EM300V ELP3 kit HV 6.4V 2000mAh LFP The emergency pack is not provided.
2-3: 3: TW Optional
-150 -120
-/+180
150 120
-90
-60 -30
0 300 600 900 1200 1500
0
90
60 30
Warning/note! emergency wiring Through wiring cannot be combined with EM pack installation.
Type
L1200 L1500
4: Close the luminaire
N
Diagonal mounting. Foil needs to be removed.
L L1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>