MUKEH01 Wireless Headphones Instruction Manual
- June 15, 2024
- Muke
Table of Contents
MUKEH01 Wireless Headphones
Product Information
Specifications
- Model: P
- Dimensions: 4 x 4 inches
Product Usage Instructions
Step 1: Unboxing
Start by unboxing the product. Remove all packaging materials and make sure
all components are included.
Step 2: Setup
Place the product on a flat surface and connect it to a power source using the
provided power cable.
Step 3: Configuration
Once the product is powered on, follow the on-screen instructions to configure
it. This may include connecting to a Wi-Fi network and setting up user
preferences.
Step 4: Product Operation
After configuration, you can start using the product. Use the buttons or
controls provided to navigate through menus and access different features.
Step 5: Maintenance
Regularly clean the product using a soft, lint-free cloth. Avoid using harsh
chemicals or abrasive materials that may damage the surface.
FAQ (Frequently Asked Questions)
Q: What is the model of the product?
A: The model of the product is P.
Q: What are the dimensions of the product?
A: The product has dimensions of 4 x 4 inches.
Package Contents
Before Use
-
Turn off the headset,use the charging cable to connect thecharged, the red LED will tum oft. charger/computer/charging bank/etc to charge.
Note: Before using the headset for the first time charge for at least 2 hours. -
The red LED will turn on to indicate that the unit is charging;Once fully charged, the red LED will turn off.
Tips: Do not tum on the headset when charging headset,or else it will lower the quality and the life of battery.
Contents
- Place headset within 10M from Bluetooth-enabled device.
- Long press 2 s, the headset will be turned on. You will hear a prompt.
- After opening the phone Bluetooth,click the
to pairing - The headset will automatically tum off after 5 minutes without pairing
Note: If the white light flashes quickly, the Bluetooth is not connected. If the white indicator blinks slowly, the Bluetooth is connected,if the red light is steady on the being charged.
Audio Line
Operation
-
Long press 1S: The prev song
Press once: Volume+ -
Long press 1S: The next song
Press once: Volume- -
LED indicator
-
Long press 2S: Power on
Long press 3S: Power off
Press once:Play/pausel
Press once: call control/hang up Three-click button: Call back -
3.5mm AUX port
-
Type-C Charging Port
-
MIC
-
EQ
Rock, jazz, rhythm and blues classical music BASS
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
E-mail:usstore_vip@163.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>