Acer KB272 Zero-Frame Gaming Office Monitor User Guide
- June 13, 2024
- Acer
Table of Contents
Acer KB272 Zero-Frame Gaming Office Monitor
Important safety instructions
- Please read the following instructions carefully.
- To clean the LCD monitor screen:
- Be sure that your monitor is electrically rated to operate with the AC power available in your location.
- Turn off the LCD monitor and unplug the power cord.
- Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
- NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.
- PLEASE DO NOT USE ANY AMMONIA OR ALCOHOL-BASED CLEANERS ON THE LCD DISPLAY SCREEN OR CASE.
- Acer will not be liable for damage resulting from the use of any ammonia or alcohol-based cleaners.
- Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
- Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
- Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
- Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to 140° F). Storing the LCD monitor outside this range may result in permanent damage.
- Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
- Monitor-to-PC signal cable is frayed or damaged.
- Liquid spills onto the LCD monitor or the monitor is exposed to rain.
- The LCD monitor or case is damaged.
Attaching the monitor to the base
- Remove the monitor from the packaging.
- Attach the footstand to the base. (for selected models)
- Turn clockwise to lock. Ensure that the base is locked onto the stand. (for selected models)
- Secure the base to the stand by turning the screw using the integrated tab or a suitable coin. (for selected models)
Connecting Your Monitor to a Computer
- Turn off your monitor and unplug your computer’s power cord.
Connect Video Cable
- Make sure both the monitor and computer are powered OFF.
- Connect the VGA video cable to the computer.
Connect HDMI Cable (Only HDMI-input model)
- Make sure both the monitor and computer are powered OFF.
- Connect one end of the HDMI cable to the back of the monitor and connect the other end to the computer’s port.
Connect DP Cable (Only DP-input model) (Optional)
- Make sure both the monitor and computer are powered OFF.
- Connect the DP cable to the computer.
- Connect the Audio Cable. (Only Audio-Input Model) (Optional)
- Insert the monitor power cable into the power port at the back of the monitor.
- Plug the power cords of your computer and your monitor into a nearby electrical outlet.
External Controls
SPECIFICATION
LCD Panel
| Driving System| TFT Color LCD
---|---|---
Size| 27”W (69 cm)
Pixel Pitch| 0.311 mm (H) x 0.311 mm (V)
Brightness| 250 cd/m2 (Typical)
Contrast| 100000000:1 Max (ACM)
Viewable Angle| 178° (H) 178° (V) (CR=10)
Response Time| 1 ms (VRB)
Video| R, G, B Analog Interface
Panel Type| In-Plane Switching
H-Frequency| 30 – 85 KHz
V-Frequency| 56 – 76 Hz
Display Colors| 16.7 Million
Dot Clock| 174.5 MHz
Maximum Resolution| VGA: 1920 x 1080 @ 60 Hz
HDMI/DP: 1920 x 1080 @ 75 Hz
Plug & Play| VESA DDCCI/DDC2B
Energy Efficiency Class| A+
*Annual Energy Consumption| 31 (kWh) (for HDMI-Input Model)
Power Consumption (at 200 nits)
| On Mode| 20 W (Typical)
Sleep Mode| 0.5 W (Typical)
Off Mode| 0.5 W (Typical)
Input Connector
| D-Sub
HDMI (Only HDMI-Input Model)
DP (Only DP-Input Model) (Optional)
Input Video Signal
| Analog: 0.7 Vp-p (standard), 75 OHM, Positive
HDMI (Only HDMI-Input Model) (Optional) DP (Only DP-Input Model) (Optional)
Speakers| 2 W x 2 (Only Audio-Input Model) (Optional)
Maximum Screen Size| Horizontal: 597.88 mm
Vertical: 336.31 mm
Power Source| 100-240 V, 50/60 Hz
Environmental Considerations
| Operating Temp: 0° to 40°C
Storage Temp: -20° to 60°C Operating Humidity: 20% to 80%
Dimensions| 612.3 (W) x 453.02 (H) x 200.05 (D) mm
Weight (N. W.)| 5.38 kg (net)
Mechanism Specifications
| Tilt: -5° to +15°
Swivel: No
Height adjustment: No Pivot: No
Detachable footstand: Yes
External Controls
|
Switch/Buttons
| Power Button Input
Hotkey 1 Menu/Navi/OK
Hotkey 2
Functions
| Brightness Mute
Contrast OverDrive
Blue Light FreeSync
Black Boost Refresh Rate Num
ACM VRB
Super Sharpness Language
H. Position (only Analog input model) OSD Timeout
V. Position (only Analog input model) Transparency Focus (only Analog input model) OSD Lock
Clock (only Analog input model) Input
Auto Configuration (only Analog input Auto Source
model) Hot Key Assignment
Gamma Wide Mode
Color Temperature DDC/CI
Modes HDMI Black Level
sRGB Mode Quick Start Mode
Grayscale Mode Display information
6-axis Hue Reset All Settings
6-axis Saturate Exit
Volume
Specifications vary depending on model and/or region.
FCC
Regulations and safety notices FCC notice
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
CE Declaration of Conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the
essential requirements and other relevant provisions of EMC Directive
2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU
and Directive 2009/125/EC with regard to establishing a framework for the
setting of ecodesign requirements for energy-related product. Notice: In order
to prevent damage to the monitor, do not lift the monitor by its base. Notice:
Shielded cables All connections to other computing devices must be made using
shielded cables to maintain compliance with EMC regulations. Notice: Acer
monitor is purposed for video and visual display of information obtained from
electronic devices.
Notice : Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.
Caution : Changes or modifications not expressly approved by the manufacturer could void the user authority, which is granted by the Federal Communications Commission, to operate this product. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003.
Disposal of Waste Equipment by Users in Private Households in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
FAQs
What is the Acer KB272 Zero-Frame Gaming Office Monitor?
The Acer KB272 is a gaming and office monitor with a sleek zero-frame design, offering a seamless viewing experience.
What is the screen size of the Acer KB272 monitor?
The Acer KB272 features a 27 Inches screen, providing ample viewing space for work and gaming.
What is the resolution of the Acer KB272 monitor?
The monitor boasts a 19200*1080 resolution, ensuring sharp and clear visuals.
Does it support high refresh rates for gaming?
Yes, the Acer KB272 offers a high refresh rate of 100Hz, making it suitable for gaming.
Is this monitor compatible with different devices?
Yes, it has multiple connectivity options and is compatible with various devices like PCs, consoles, and more.
Does the monitor come with built-in speakers?
No, the Acer KB272 does not have built-in speakers, but you can use external speakers or headphones.
Is it VESA mount compatible?
Yes, it is VESA mount compatible, allowing you to mount it on a compatible stand or arm.
Does the monitor have adaptive sync technology?
Yes, it features adaptive sync technology for smoother gameplay and reduced screen tearing.
Is there a blue light filter for eye comfort?
Yes, the Acer KB272 has a blue light filter to reduce eye strain during extended use.
What is the response time of the monitor?
The monitor offers a fast response time of 1ms Response Time for quick and responsive visuals.
Can I adjust the monitor's height and tilt?
Yes, it allows for height and tilt adjustments, providing ergonomic comfort during use.
Is there warranty coverage for the Acer KB272 monitor?
Acer typically offers a 1 year warranty for this monitor, covering manufacturing defects.
Download This PDF Link: Acer KB272 Zero-Frame Gaming Office Monitor User Guide.