ADK Instruments SV300 Wireless Crane Cameras User Guide

ADK Instruments SV300 Wireless Crane Cameras

Specifications

SV300 Wireless Camera

• Name: SV300 Wireless Camera
• Wireless Technology: Wi-Fi 5GHz
• Battery: Embedded Battery
• RJ45 Port: Yes
• Power Button: Yes
• 3-pin Power Charging Port: Yes
• Battery Status Indicator: Yes
• Camera Status Indicator: Yes
• Hex bolt to arrange camera angle by using HEX KEY : Yes
• Wireless Status Indicator: Yes
• Magnets for mounting: Yes
• Omnidirectional Antennas: Yes

Streambox

• Dimension: 150 x 100 x 48 mm
• Weight: 0.5kg
• Wireless Technology: Wi-Fi 5GHz
• Antenna: Omnidirectional 5GHz x2
• RJ45 Port: Yes
• USB Type A Port for Charging: Yes
• DC 12V Power Port: Yes
• LED Indicator: Power status x1, LAN connection status x1, Signal strength x4
• Power Supply: DC 12V
• Waterproof: IP65

Tablet

• Dimension: 250 (L) x 155 (W) x 8(H) mm
• Weight: 0.5kg
• OS: Android 12
• Display: 10.37 IPS Touch Screen
• Resolution : 2000 x 1200
• Wireless Connectivity: Wi-Fi 802.11 a/b/g/n/ac
• CPU: Octa-core processors
• Memory: 4G DDR
• Power Supply: DC 5V

(Optional) External Power Bank

• Battery type : N/A
• Capacity: N/A
• Battery Life : N/A
• Charging Time : N/A
• Power Charger Installation : N/A
• Waterproof: N/A
• Operation Temperature: N/A
• Dimension: N /A
• Weight: N/A

Packing List

1. SV300 Wireless Camera
2. Streambox
3. Monitor
4. SV300 5GHz Omnidirectional Antenna (White. N-type) x 2pcs
5. SV300 Power Adapter (with Waterproof 3-pin Connector)
6. SV300 Wireless Camera Remote Key Fob
7. Streambox 5GHz Omnidirectional Antenna (Black, SMA) x 2pcs
8. Streambox Power Cord (with Cigarette Lighter)
9. Monitor Charging Cable (USB Type C to Type A)
10. Monitor Holder
11. Magnetic Cable Collector x 2pcs
12. Safety Lanyard
13. 90-degree angle antenna transmitter

Product Specification

SV300 Wireless Camera

Streambox

Table

(Optional) External Power Bank

Placement
For the SV300 Wireless Camera system installation, there are two places to install different devices as following figure to watch real-time 2K QHD video streaming in the cabin.

SV300 Wireless Camera

1. Attach one 5 GHz omnidirectional antenna (white) on the N-type port of SV300 Wireless Camera.
2. Attach another 5 GHz omnidirectional antenna (white) on the 90-degree angle antenna transmitter which is pre-installed on the N-type port of SV300 Wireless Camera.
3. Wipe clean the hook surface of the crane.
4. Attach the SV300 Wireless Camera on the crane’s hook surface magnetically, and then use safety lanyard to lock it to the crane for safety.
5. Press the power button to turn on the Camera.

Streambox & Tablet

1. Attach two 5 GHz omnidirectional antennas (black) on the SMA ports of Streambox.

2. Connect the Streambox to the cigarette lighter connector of the cabin by using a power cord with the cigarette lighter.

3. Connect the monitor to Streambox by using USB charging cable.

4. Press the power button to boot up the monitor.

5. After monitoring the boot-up, check the status of the Wi-Fi.
   Once the SSID “5G_SV300_XXX” (XXX=001~999) is connected, the monitor can receive the video streaming from the SV300 Wireless Camera

6. Set the date and time of the monitor to your local time before using HERCULES APP: Swipe up -> Select the “SETTINGS” icon -> Go to “SYSTEM” -> Set your local time in “DATE & TIME”.

7. Default login information

   • Admin account: Admin
   • Operator account: Operator
   • Password: 1234

LED Indicator

Wireless Status Indicator
There are 6 LED indicators on the SV300 AP and Streambox indicate the wireless connection status.

SV300 Wireless Camera Power Status
There is one LED indicator on the SV300 Wireless Camera that indicates the power status of the SV300 Wireless Camera.

SV300 Embedded Battery & External Power Bank Power Status
There is one LED indicator on the SV300 embedded battery and external power bank indicates the their battery life status.

Remote Camera Power On/Off Management
Using the remote key fob, you can remotely turn ON/OFF the SV300 Wireless Camera to prolong its operating time and decrease the need for frequent power charging.

Note: Before using remote key fob, please make sure the power button of SV300 Wireless Camera is pressed to show the green light.

Camera Playback

1. Preparea LAN cable and a Windows PC/laptop with an RJ45 port to proceed with the following steps.
2. Press the power button to turn on the SV300 Wireless Camera.
3. Use the LAN cable to connect the SV300 Wireless Camera and PC.
4. Manually set the IP address for your PC or laptop to connect the SV300 Wireless Camera:
5. a. PC/laptop IP address: 192.168.XXX.XXX (e.g. 192.168.5.112)
6. b. Subnet Mask: 255.255.255.0
7. c. Gateway: 192.168.XXX.1 (e.g. 192.168.5.1)
8. Launch your browser Chrome or Edge. Input the IP address of yourSV300 Wireless Camera, and then input the camera account “admin” and password “Scarlet@5355” to login camera.
9. Select the “Download plugin” to download plugin file if you visit this page first time.
10. Open this file to install this plugin file on your PC or laptop.
11. After installation process, launch the browser to login the SV300 Wireless Camera again. Select the page “Playback”, select the date and then click the search icon.
12. The green time bar with the video recording will appear at the bottom screen. Press “Play” to watch the recorded video.
13. The video recording can also be download to your PC or laptop to press the icon “Download”. The video file format will be MP4 file.

Scarlet Tech Co., Ltd.
© 2023 Scarlet Tech Co., Ltd. All rights reserved.
4F.-3, No. 347, Sec. 2, Heping E. Rd., Da’an Dist., Taipei City 100, Taiwan info@scarlet.com.tw
www.scarlet-tech.com

References

• Scarlet Tech | Occupational Safety Expert & Wireless Environment Monitoring

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>