AMASEA UDIO 845 Opel 7inch Android Instruction Manual
- June 15, 2024
- AMASEA UDIO
Table of Contents
AMASEA UDIO 845 Opel 7inch Android
Installation Instructions
4 steps to install
STEP 1
Check
- Do the screen is broken ?
- Do the accessories have missing ?
Accessories
- GPS antenna *
- External microphone *1
- Power cable *1
- Wi-Fi antenna *1
- USB adapter cable *1
- USB adapter cable *1
- USB adapter cable *1
- Radio antenna adapter Cable *1
- Canbus *1
- Disassembly tools *2
- 15A fuse *1
- Short screw *4
- Nut 1 Gasket 2
- Long screw *1
- Disassembly tools *1
- 3M adhesive *1
STEP 2
Test your unit before a full installation.
(Connect the power cable to your car)
-
Double check the size and shape of the center console panel.
-
Prepare the disassembly tools(12). Then plug it to the holes of old radio.
-
After that you can pull the whole unit out from the console.
Now you can take out the power cable to connect the head unit and then try to turn it on. If this part is no problem, you can do the remain steps.
STEP 3 -
Connect those wires provided in the package like (1) Power cable with canbus, (2) USB cable, (3) Radio antenna adapter cable, (4) GPS antenna, (5) Wi-fi antenna and (6) External microphone as shown.
-
Plug the head unit into the center console, then place the GPS antenna and microphone as shown. The wires are hidden in the side of pillar trim and led to the head unit.
Wiring diagram
- Power amplifier control
- Stewing wheel control
- Steeling wheel control
- Brake wire
- Auto antenna power
- Rearview control wire
- Rear left speaker-
- Rear left speaker+
- Rear night speaker-la
- Rear right speaker*
- GANBUS TX OR)
- CAN8US RX (GNDI
- ILLUMI
- Accessory
- Ground
- Power+12V
- Front left speaker-
- Front la speaker+
- Front right speaker –
- Front right speaker+
STEP 4
Test the head unit functions.
(FM, SD, USB, Bluetooth, reversing, handbrake, headlight, steering wheel
control and etc)
Wire connection for the amplifier, the subwoofer and the headset monitors
Case 1: The subwoofer connects to the head unit
Case 2: The 2/4 speakers with an amplifier are connected to the head
unit.
Case 3: The 214 speakers with an amplifier and the subwoofer with an amplifier are separately connected to the head unit.
Optional : Install a rear camera
Our main unit only syncs the rear camera but not the front camera.
Cable connection
System Initial setup
-
Set radio location
The default radio country in the unit is Europe, if you are from other country, you need to access the “factory mode (PW: 126) > Radio” to adjust the country.
-
Set RDS
The Radio has RDS function but this function is only for Europe, if the clients from other countries use it, it will affect the radio receival, so please close it.
-
Set the unit language
Please go to setting > Languages & input, then you can add the desirable language you need.
About after sales service
Q: Do my head unit has one year maintenance?
A: Definitely yes, you will have our commitment after you purchase.
(The maintenance period will base on the date you make the order)
