AUDIDH HX200Q5 Portable Charger Wireless Charging Instruction Manual
- June 15, 2024
- AUDIDH
Table of Contents
AUDIDH HX200Q5 Portable Charger Wireless Charging
Product Information
Specifications
- Product Model: HX200Q5
- Battery Type: Li-polymer electric core
- Input Parameter: Type-C–5V/3A,9V/2A Micro–5V/2.1A
- Output Parameter: Type-C–5V/3A,12V/1.67A,9V/2.77A(Max)
Product Features
- Safety : Multiple protection designs for overcharge, overdischarge, high temperature, and short circuit.
- Efficiency : Quick charging and discharging with multi-protocol intelligent output.
- Compatibility : Intelligent USB charge controller compatible with mainstream mobile phones and digital devices.
- Quality : High-quality lithium polymer batteries and customized charge and discharge management chips.
Product Introduction
This product is a high-capacity portable power source with a high-quality
Li-polymer electric core and customized charging and discharging electric
chip. It excels in safety, efficiency, and compatibility.
Product Usage
Power Indicator Switch
The LED light will automatically turn off after the product stops working
for about 32 seconds. To view the current remaining power of the product, tap
the switch to re-light the LED light. Gently and continuously press the switch
twice to stop charging.
Charging
To charge the product, connect it to a brand power adapter. The LED light will
show the current battery charge while charging.
Charging Capacity Indicator
| LED1 | LED2 | LED3 | LED4 |
|---|---|---|---|
| Flicker | |||
| Bright | Flicker | ||
| Bright | Bright | Flicker | |
| Bright | Bright | Bright | Flicker |
| Bright | Bright | Bright | Bright |
| Bright |
Output
This product uses a smart identification charging design. When a digital
product is connected with a USB power cable, it will be intelligently and
automatically recognized, and the charging function will be activated. The LED
light shows the current battery charge during charging.
Wireless Charging Function
To use the wireless charging function, align the position of the receiver of
the digital product supporting wireless charging with the position of the
wireless charging indicator of the mobile power supply. The LED1 red light is
on when there is an abnormality or a foreign object during wireless charging.
The LED indicator shows the current battery level during the charging process.
Notice
- Please fully charge this product before first usage.
- During the usage of this product, please lighten the screen of the digital product and confirm that the charging connection label is correctly displayed to ensure normal working condition.
- During the charging for this product or charging for a digital product with this product, please select the adaptive connecting line by yourself.
FAQ
How long does it take to fully charge the product?
The charging time may vary depending on the power adapter used, but it
typically takes around [insert estimated time] to fully charge the product.
Can I use this power source with non-mainstream mobile phones and digital
devices?
This power source is primarily compatible with mainstream mobile phones and
digital devices. However, it may also work with non-mainstream devices, but we
cannot guarantee full compatibility.
Is it safe to leave this power source plugged in overnight?
Yes, this power source is equipped with multiple protection designs to
handle abnormal conditions such as overcharge. It is generally safe to leave
it plugged in overnight, but we recommend following the manufacturer’s
guidelines for optimal usage.
Operation Instruction for Portable Power Source
Please read this operation instruction before using the product.
Product Ports
Specifications
-
Safety:
-
With multiple protection designs, several abnormal conditions such as overcharge, overdischarge, high temperature and short circuits can be easily handled no matter in charging, discharging or standby state to provide a reliable guarantee for your mobile phone and digital device.
-
Efficiency:
With quick charging and discharging efficiency, supporting quick charging and discharging, Multi-protocol intelligent output. -
Compatibility:
embedded with an intelligent USB charge controller, compatible with mainstream mobile phones and digital devices, supporting mainstream quick charging and discharging devices. -
Quality:
Choose high-quality lithium polymer batteries and customize charge and discharge management chips.
Product Introduction
Thank you for your selection. This product is a type of high-capacity portable power source with a high-quality Li-polymer electric core and customized charging and discharging electric chip, which performs well in safety, efficiency and compatibility, etc.
Basic parameters
- Product model : HX200Q5
- Battery type : Li-polymer electric core
- Input parameter : Type-C–5V/3A,9V/2A Micro–5V/2.1A
- Output parameter: Type-C–5V/3A,12V/1.67A,9V/2.77A(Max)
- 1USB QC–5V/3A,9V/2A,12V/1.5A,4.5V/5A(Max)
- 2USB–5V/2.1A
- Wireless charging output： 15W(Max）
- Dimension :~23.5×78.3×155.7mm
- Usage temperature: 0℃~45℃
Product Operation
Power Indicator Switch
After the product stops working, the LED light will automatically turn off in about 32 seconds. To view the current remaining power of the product, you can tap the switch to re-light the LED light to view the current remaining power of the product, gently and continuously press twice: stop charging.
Charging
Charge the product with a brand power adapter connection. LED light shows the current battery charge while charging
Capacity/Indicator light|
0～25%
|
25～50%
|
50～75%
|
75～100%
|
finished charging
---|---|---|---|---|---
LED1| flicker| bright| bright| bright| bright
LED2| | flicker| bright| bright| bright
LED3| | | flicker| bright| bright
LED4| | | | bright| bright
Output
This product uses a smart identification charging design. When the digital
product is connected with a USB power cable, the digital product can be
intelligently and automatically recognized, and the charging function can be
activated. LED light shows the current battery charge during charging
Wireless charging function: align the position of the receiver of the digital product supporting wireless charging with the position of the wireless charging indicator of the mobile power supply, and start the charging function （LED1 red light is on when the wireless charging is abnormal or there is a foreign object）. During the charging process, the LED indicator shows the current battery level.
capacity
Indicator light
|
low battery
|
0～25%
|
25～50%
|
50～75%
|
75～100%
---|---|---|---|---|---
LED1| flicker| bright| bright| bright| bright
LED2| | | bright| bright| bright
LED3| | | | bright| bright
LED4| | | | | bright
Notice
Please fully charge this product before first usage.
- During the usage of this product, please lighten the screen of the digital product and confirm that the charging connection label is correctly displayed to ensure that the product is in normal working condition.
- During the charging for this product or charging for digital products with this product, please select the adaptive connecting line by yourself.
- If the LED light of this product goes out during the charging process of the digital product, it means that the battery of the product is low, please charge it immediately.
- During the wireless charging of the digital product, the red light of LED1 is on to indicate abnormal charging (foreign objects). Check whether the position of the receiver of the digital product corresponds to the position indicated by the mobile power wireless charging and whether there are other metal objects.
- During the connection between the digital product and this product, the digital product has priority to use the electric quantity of this product.
- When the digital product is fully charged, please take out the connecting line in time to avoid loss.
- If the product enters into protection status due to output short circuit or other reasons (LED has no display after pressing buttons), it can be recovered by charging activation via external charger.
Warning
Since this product contains a Li-ion electric core, it’s forbidden to
dismantle the product shell arbitrarily to avoid possible damage to the
electric core or other dangers.
It’s forbidden to arbitrarily dismantle, squeeze, or puncture this product or put it in short circuit, water, fire or exposed to an environment with a temperature higher than 60℃ (140℉).