Fovbun TPABSFL13FME-24WA Smart COB RGB IC Floor Lamp Installation Guide
- June 15, 2024
- Fovbun
Table of Contents
Fovbun TPABSFL13FME-24WA Smart COB RGB IC Floor Lamp
What’s In The Box
Installation Guide
Step 1
Insert the connecting piece into the first pole and align the holes. Use two
screws to tighten it. Align the metal slots on the second pole with the holes
on the connector, and use two screws to tighten them. Ensure that the fivo
poles are tightly aligned. Repeat the process for the remaining rods. Finally,
install the top cap at the top of the pole.
Tips:
Make sure the two poles are firmly together before tightening the screws to
prevent large gaps that could cause tilting or light leakage.
Step 2
Slide the metal slots Of the pole onto the base, and tighten them with two
screws.
Step 3
Straighten the silicone light strip and connect the wires from the strip to
the corresponding wires in the lamp base. (Make sure to match the wire colors
when connecting them.).
Step 4
Ensure to keep the exposed wires inside the lamp base. Attach the silicone
light strip according to the image below, and then press the strip light from
the middle towards the two ends. Connect the adapter to the lamp base cable
and plug it into a power outlet to power the lamp.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>