KOKONI 3D Printer User Manual

3D Printer
User Manual

Important Statement

Thank You for choosing the KOKONI 3D printer. We hope You enjoy the experience!
We strongly recommend you read this manual carefully before operating your printer. Using the printer indicates that you have both read this manual and agreed to the safety instructions listed below.
KOKONI is dedicated to providing the best possible service. To reach our customer support, please feel free to contact us by phone or email provided at the end of this manual
For a better experience, please visit our official website www.kokonid.com for hardware and software-related information, contact information, operating and maintenance  information, and so on
Moxie (Huzhou) Technology Co. Ltd reserves the right to revise and construe this user manual

IMPORTANT SAFETY INSTRUCTIONS

1. Do not attempt to use the printer for any other unintended purposes not mentioned in the manual, as doing so may result in personal injuries or property damage
2. Do not position the printer near any combustibles, explosives, or heat sources. A well-ventilated, cool, and dustless environment would be perfect
3. Do not place the printer in a vibrating or unstable environment. The shaking of the machine may cause a print quality issue
4. Please use the power adapter we provide to connect the printer to a nationally accredited two-hole power outlet, don’t use other adapters to connect the printer. To reduce  the risk of fire or electric shock, do not expose the printer to rain or moisture
5. Do not wear woven gloves while operating the printer as they could be rolled in via the movable parts, which could result in bodily body injuries
6. Keep any part of your body off the moving nozzle and the printing platform, while the printer is operating
7. the models printed out by the printer are not edible,
8. Do not loosen any screws of the machine to prevent electrical shock
9.  To guarantee the printing quality and standard service life of the printer, please use the filament we recommend
10. Maintain the printer on a regular time basis, switch off the printer to clean the shell with a piece of dry cloth, clear up filament slag in the printing chamber with a tweezer and  check whether there are some foreign objects on the belt
11. To avoid injuries, it is forbidden for children aged 0or less to operate alone
12. Users should strictly comply with the relevant local laws and regulations of any residing region or country, observe professional ethics and ensure safety while using this product. Otherwise, they should bear corresponding legal liability

Product Introduction

Note: Please wait till the white indicator light stops flashing before operating the device!

Product Specifications

material of filament
80 mm/s (MAX)| 0.04-0.35 mm| STL., OBJ, etc.| Modified PLA

Environmental Specifications

Printer Start-up

1. After turning on the Power switch, there will be a beep sound and the indicating light in white color will start to flash (to ensure better print quality, please place the printer in a flat and stable place).
2. Wait for the printer to perform its power-on self-test procedure. This may take about 30 to 60 seconds. Then, the white indicating light will stop flashing, and the printer is ready for use. Tips:
   You can download the printer control KOKONI App during the power-on self-test of the printer.

Indicator status

KOKONI App Installation

http://www.kokoni.ltd/home/#/pages/downLoadApp/downLoadApp

WiFi Network Configuration

Attention:

1. For some phone models, it would take some time to search for a hotspot, please wait/refresh or just turn off the WiFi function and restart it.
2. The following functions have to be turned off for some phone models: WiFi Security Inspection, WLAN+, Network Intelligent Selection, connect to the Best WLAN Network, and Automatically Switch to the Cellular Network.

If you encounter problems in WiFi network configuration, please check the following diagnosis procedure:

1. Confirm the WiFi account and password, and make sure the WiFi entered is the current environment WiFi instead of the KOKONl3D hotspot.
2. Ensure that the network environment is good. If the problem still exists, change to another network. 5G WiFi is not compatible. For the WiFi network configuration instructions designed for smartphones of various models, please refer to the Operation Guidance of the App.

Quick Print

Attention:

1. After printing starts, the printer usually takes about 2 minutes to heat up. Please wait patiently.
2. Under no circumstances should you touch any moving parts as injuries could be inflicted. Be aware of the hot nozzle. If anything goes wrong in the printing process, click Cancel to terminate printing or just unplug the power adapter. In such a case, try not to make contact with either the nozzle or the printing bed.

3D Avatar Modeling

Attention:

1. 3D Avatar modeling requirements: (l)Support selfie capturing or uploading photos via a smartphone; (2)When taking photos, light up the person sufficiently and make the person’s face towards the camera without being blocked; (3)Don’t put on hats when taking photos; (4)Do not take profile selfies; (5)Upload high-definition photos; (6)Do not upload a photo of more than one person.

Please be noted that this function is only suitable for modeling living human beings’ faces.

1. If you are prompted with “no face”, please change to a brighter shooting environment, remove your glasses, and take an unobstructed photo of your face.
2. If you are prompted with “Image format is not standard”, please try to take pictures with your camera, and do not upload motion pictures such as GIFs.

Object Modeling

Attention:

1. Object modeling is based upon precise 3-dimensional measurement of 20-300 images taken around the object with each movement of the viewing angle less than 30 degrees and one overlaying another by more than 60%.
2. The system will automatically verify whether the uploaded photos are qualified or not. At least 20 qualified photos are needed for modeling.
   As reconstructed via a computer algorithm, the modeling process takes about half an hour in the background, and you can exit this page during the course of modeling. When finished, a message will pop up to notify you if the function of “Push Notification” is activated. You can then check the model in “My Models”.

Model Upload

Filament Replacement

Printer Maintenance

Cleaning Up

FAQ

Q: How to make the surface of a model more smooth?****

A: To make a model look shiny and feel smooth, you need to use sandpaper or other tools to polish it. You can also select “High” in the precision set to make better surface finishing. If the condition is intolerable and difficult to fix, contact the Customer Service Department

Q: Is the printer compatible with other filaments?****

A Not yet, please use KOKONI modified PLA filament

Q: How to change the filament?****

A: Launch the KOKON App and go through “My Printer” and “Replace Filament” to change it. More detailed instructions are shown on pages 11-12of the manual. Change the filament without KOKONI App could cause print quality issues or even damage the printer itself

Q: Why doesn’t the model stick onto the base plate?****

A: When the first layer of a model doesn’t stick to the base plate, apply a layer of glue to the base plate and do printing at room temperature ranging from 20C to 25C as a proper temperature could prevent the base plate from bending over. Model warping is a normal phenomenon caused by the physical properties of the plastic itself, so printing in a warm environment can help to alleviate bottom warping

Q: How many models can a reel of the filament make?****

A: The reel of the filament is 70m, and the number of models it could make depends on the size of the models. Models of large size may need more filament. A more complicated model may consume more filament, too. On average, a real filament may print out about 20 simple models

Q: Is it possible to resume the last printing task following a power failure?****

A: Negative, once the power is out, the printing process ends.

Q: The connected printer becomes offline****

A: Reboot the printer and KOKONI App. If the printer still remains offline, delete it and reconnect the printer for network configuration.

Hazardous Substance Declaration

Printed circuit board
(PCB)| X| 0| 0| 0| 0| 0
Shell| 0| 0| 0| 0| 0| 0
Wire| 0| 0| 0| 0| 0| 0
Hardware| 0| 0| 0| 0| 0| 0
Power adapter| 0| 0| 0| 0| 0| 0

The said table is compiled according to the standards of SJ/T 11364. Indicates that all homogeneous materials of the component in question contain the current hazardous substance less than the limit as provided in GB/T 26572. x Indicates that at least one certain homogeneous material of the component in question contains the current hazardous substance above the limit as provided in GB/T 26572.
Notes: No batteries are needed by the printer.

After-sales Support

Warranty Period
l-year Limited Warranty for the printer and power adapter from the date of purchase;
3- months Limited Part Warranty for the Vulnerable parts( Extruder, Belt, Printing Platform Nozzle Module, etc.);
No Warranty for the Tools, Filaments, Printer Shell, User Manual, Warranty Card, etc.
What Is Not Covered?
1. The warranty period expires;
2. The purchase voucher is invalid or not identical with the product model;
3. Either the purchase voucher or the warranty card becomes unidentifiable due to man-made damage;
4. Use, maintain or repair the printer unintendedly, or dismantle the hardware or alter the software without KOKONI’S permission;
5. The circuit board of the printer has been ruined due to a crash, soaking, falling down, or other human factors;
6. Use components not certified by the manufacturer;
7. Damage caused by force measures such as fires, lightning, and floods;
8. The product ages or discolors normally along the process of operation;
9. Product gifts.
After-sales Support
Please read the user manual and warranty card carefully before use. For any after-sales service, please priorly contact the local seller or contact us via Email:Support@kokoni3d.com or Call (+86)400-900-1360/ 0086-572-8219691
Please provide the product Serial Number when applying for technical support.
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
the device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator&your body.

Warranty Card

Maintenance service center|  | Date of delivery for repair|
---|---|---|---
Reason behind fault|
Fault description|
Return evidence|
Repairer (signature)|  | Repairer (seal)|

Moxie (Huzhou) Technology Co., Ltd
Address:2F, 5B, No. 926, Changhong East Str., Deqing County, Huzhou City, Zhejiang Prov., China.
Website: www.kokoni3d.com
Hotline: (+86)400-900-1360
Email: Support@kokoni3d.com
http://www.kokoni3d.com/#/pages/instructionBook/instructionBook
To better serve our customers, the manual may be updated from time to time,
we recommend scanning this QR code to view the latest manual. Thank you for your support.
Due to different models, the actual product and the picture may be a little different, please refer to the prevailed product; the Software update page may change, please refer to the actual software page instructions; Moxin (Huzhou) Technology Co., LTD reserved all the right for final explanation.

References

• KOKONI3D模型社区服务
• 360百科

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>