nVent LK8ES Interlok Standard Grout Fill Coupler Owner’s Manual
- June 15, 2024
- nVent
Table of Contents
LENTON
Owner’s Manual
NVENT LENTON INTERLOK STANDARD GROUT-FILL COUPLER, COATED,
EPOXY COATED, 25 MM, #8, 25M
LK8ES
CATALOG NUMBER
Coated reinforcing bar is used in place of plain reinforcing bars to protect against corrosion. Typical applications include bridges, parking structures, pavement, marine structures and repair work. nVent LENTON couplers and mechanical anchors are available in multiple coatings to meet specific job requirements.
FEATURES
Designed to splice the same diameter bars
Smaller bars can be installed into the over-sized cavity end if required
Over-sized cavity allows for greater field tolerance
Taper-threaded end helps prevent movement of the reinforcing bars and
eliminate misalignment
Requires less grout than most competitive systems
Multiple coatings available
PRODUCT ATTRIBUTES
Material: Cast Iron
Finish: Epoxy Coated
Finish Standard: ASTM® A775/A775M and AASHTO M284
Rebar Size, US: #8
Rebar Size, Canada: 25M
Diameter 1: 2.69″
Diameter 2: 2″
Length 1: 8.62″
Length 2: 7″
Bar Depth: 1.36″
Unit Weight: 4.8 lb
Designed to Meet: AASHTO; ABNT NBR 8548:1984; ACI 318 Type 1 (125% Specified
Yield); ACI 318 Type 2 (Specified Tensile); ACI 349; ACI 359; AS3600; BS EN
1992-1-1; CAN/CSA – N287.2/.3/.4; IBC Type 1 (125% Specified Yield); IBC Type
2 (Specified Tensile); US Army Corps of Engineers; CAN/CSA – A23.3
ADDITIONAL PRODUCT DETAILS
Bar dimensions and weights listed may vary by region. Coupler sizes not shown
may be available by special order. Contact your nVent LENTON representative
for more information.
Prior to installation, please read and understand the detailed instructions
and safety notices provided in the nVent LENTON Interlok Instruction Manual.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and
from your nVent customer service representative. Improper installation,
misuse, misapplication or other failure to completely follow nVent’s
instructions and warnings may cause product malfunction, property damage,
serious bodily injury and death and/or void your warranty.
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793
Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500