Jabra Evolve2 65 USB C UC Stereo Wireless Charging Instruction Manual
- June 15, 2024
- Jabra
Table of Contents
Jabra Evolve2 65 USB C UC Stereo Wireless Charging
Specifications
- Model: Jabra Evolve2 65 Flex
- Connectivity : USB-C
- Compatibility: UC (Unified Communications)
- Sound: Stereo
- Charging: Wireless Charging
Product Usage Instructions
Step 1: Pairing the Device
- Make sure the Jabra Evolve2 65 Flex is fully charged.
- Turn on the device by sliding the power switch to the ON position.
- Put the device in pairing mode by pressing and holding the Bluetooth button for 5 seconds until the LED light starts flashing.
- On your mobile device or computer, go to the Bluetooth settings and select “Jabra Evolve2 65 Flex” from the list of available devices.
- If prompted, enter the PIN code (usually 0000 or 1234) to complete the pairing process.
Step 2: Adjusting the Fit
The Jabra Evolve2 65 Flex is designed for all-day comfort. Follow these
steps to adjust the fit:
- Extend or retract the headband to fit your head size.
- Rotate the ear cups to align with your ears.
- Adjust the microphone boom arm to position the microphone closer to your mouth.
Step 3: Using the Controls
The Jabra Evolve2 65 Flex features intuitive controls for easy operation.
Here’s how to use them:
- Volume Control: Use the volume buttons to adjust the audio level.
- Mute: Press the mute button to mute/unmute the microphone.
- Answer/End Calls: Press the multifunction button to answer or end calls.
- Play/Pause Music: Press the multifunction button to play or pause music.
Step 4: Charging the Device
The Jabra Evolve2 65 Flex supports wireless charging. Simply place the device on a compatible wireless charging pad to charge it. Alternatively, you can also use the provided USB-C cable to connect the device to a power source for charging.
Wireless Charging
What can I do if the pairing steps are not successful?
- If the pairing steps are not successful, try the following troubleshooting steps. Try re-pairing after you complete each troubleshooting step.
- Restart your mobile device by turning it off and on.
- Restart your Jabra device by turning it off and on.
- Ensure your Jabra device is in pairing mode. See the following section,
- Related Frequently Asked Questions, for guidance on how to pair your Jabra device.
- On your mobile device, turn Bluetooth off and on.
- Try to pair your Jabra device using a different mobile device. This is to confirm that a different mobile device will find and pair with your Jabra device.
- Ensure your Jabra device is updated with the latest firmware version.
- Reset your Jabra device. See the following section, Related Frequently
- Asked Questions, for guidance on how to reset your Jabra device.
- If you still cannot pair your Jabra device with your mobile device, contact support.
Frequently Asked Questions (FAQ)
Q: What should I do if the pairing steps are not successful?
A: If the pairing steps are not successful, try the following troubleshooting
steps:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>