VORTIX uEye1 Eye Massager User Manual
- June 4, 2024
- VORTIX
Table of Contents
VORTIX uEye1 Eye Massage
Catalogue
- Please be sure to assemble and use the products according to the regulations contained in the Instructions for Use.
- Please read the “Instructions for Use” carefully and keep them properly for future reference. elf you have any questions in use, please contact the online customer service according to the language you need.
Thank you for purchasing this product. For convenience, please read this instruction carefully before using and keep it properly. The pictures in this manual are for illustration only, and the specifications are subject to physical objects.
Product Introduction
Basic configuration
- Massager x 1
- Charging Cable x 1
- Color box x 1
- user’s manual x 1
Read Me First
Matters needing attention
- Do not use this product while driving.
- do not wear contact lenses and hair accessories when using this product.
- skin swelling, sunburn or other skin diseases do not use.
- keep products away from fire sources, heating high temperature objects, liquid or moist environment; Do not touch the power supply or power cord when the user is in wet liquid or in contact with water.
- during the use of the best not to borrow others, to avoid cross-infection of eye diseases.
- please avoid using after drinking.
- please wear this product in the eyes before starting up, avoid damage to gas overpressure.
- Ensure that the conductive part of the product (such as wire, power supply) does not contact with liquid.
- If the product accidentally enters the water, do not lift the product immediately, turn off the product immediately and cut off the power supply.
- This product is not suitable for diagnosis, treatment and other commercial purposes.
Read Me First
Use with caution for the following groups
- Do not use this product if you have had eye surgery.
- Do not use if you have glaucoma, cataract, retinal detachment and other symptom.
- This product has a hot compress function, please be cautious for those who are sensitive to heat.
Warm prompt
- Overuse is not good for your skin. 2-3 times a week.
- Use once a day after about a month.
- Please adjust the use times and time according to the specific conditions of the skin.
Operation
Instructions for use
Charging
Wear
The user adjusts the length of the elastic band to the user’s favorite
position according to the size of the head circumference.
Boot
In the off state, press and hold the key for 2 seconds to start working.
Massage function, a total of four modes:
- Mode 1: Automatic mode
- Mode 2: Eye mode
- Mode3: Eye protection mode
- Mode4: Sleep mode
music
Built-in 2 light music, loop playback; quick double-tap switch button, music
off or on.
Bluetooth connection
- can be connected by Bluetooth to realize the function of listening to songs and listening to books.
- mobile phone search Bluetooth name: “uEye1 “.
Lithium battery low voltage protection
When the product is low, the voice will be broadcast “The battery is not
enough, please charge it in time”.
When the product is exhausted, the voice will be broadcast “The battery is
exhausted, it will be shut down”.
Maintenance
- Take measures against moisture, rodents and pollution.
- Please put the product in a safe place after use, do not put heavy objects on the product to prevent product damage.
- When there is a fault, please contact the technician for repair, please do not disassemble the product at will.
- It is forbidden to cause the product to enter the water in any way to avoid damage.
- away from magnetic equipment, no magnetic interference eround.
- Do not dispose of the product while ii is in working condition;
- Please do not use ii when charging.
- Do not use the charging power supply with fast charging function to charge the product to prevent the instrument from entering the circuit protection state.
- products with simple shockproof facilities, suitable for air, rail,road and ship transportation. Avoid rain, snow, inversion and collision during transportation.
- ‘llAlways check the appliance for signs of wear or damage. If there is such an indication, or if the appliance has been misused, return the appliance to the supplier before re-use.
Cleaning
- :When the product is dirty, wipe it with a soft cloth.
- After each use, wipe the product with a clean soft towel.
Storage
When the storage period is more than 3 months, the machine should be recharged
and used again after unpacking. Do not res I on the ground, walls and roof
when placed. The room should be well ventilated to avoid strong sunlight and
corrosive gases.
Troubleshooting
If there is a malfunction during operation, please check the fol lo -wing:
Product Battery Dismantling Steps
- Cut off the external power supply and remove the product shell;
- Cut off the two power lines connected to the battery in turn.
- Remove the battery and glue the break of the power cord with insulator glue.
- Disused batteries should be placed at a fixed recycling point.
- Please follow the local environmental laws and guidelines to abandon and protect the environment.
Be careful
- First, the battery must be removed from the device before it is discarded.
- First, before removing the battery, the appliance must be powered off first.
- A battery should be disposed of safely.
- Non-professional personnel do not disassemble by themselves!
Health and Environmental Protection Instructions
- Packages of this product can not be discarded or burned at will, and should be sent to the garbage collection station.
- When this product is discarded or not used, it can not be disassem bled, discarded or burned at will. Please send it to the garbage collection station.
Product Parameters
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.