tp-link MR200 Wireless Dual Band 4G LTE Router User Guide

tp-link MR200 Wireless Dual Band 4G LTE Router

Wireless Dual Band 4G LTE Router

Specifications

• Model: Wireless Dual Band 4G LTE Router
• Wireless Bands: Dual Band (2.4GHz and 5GHz)
• Network Connectivity: 4G LTE

About This Guide

This guide is a complement to the Quick Installation Guide. The Quick Installation Guide provides instructions for quick internet setup, while this guide provides detailed information on each function and guides you through the configuration process based on your needs.

Please note that features may vary depending on the model and software version of the router. The availability of the router may also vary by region or ISP. The images, steps, and descriptions in this guide are examples and may not reflect your actual experience.

Chapter 1: Get to Know Your 4G LTE Router

1.1 Product Overview

The product is a wireless dual band 4G LTE router that provides high-speed internet connectivity. It supports both 2.4GHz and 5GHz wireless bands for seamless wireless connections.

1.2 Panel Layout

The router has a top view and a back panel.

1.2.1 Top View

The top view of the router includes various indicators and buttons for easy monitoring and control.

1.2.2 The Back Panel

The back panel of the router features ports for connecting external devices and antennas for better wireless coverage.

Chapter 2: Connect the Hardware

2.1 Requirements for Operation

Before connecting the hardware, ensure that you have all the necessary components and meet the requirements for operation.

2.2 Position Your 4G LTE Router

Choose an optimal location to position your 4G LTE router for better signal reception and coverage.

2.3 Connect Your 4G LTE Router

Follow the instructions to connect your 4G LTE router to power and other external devices such as computers or modems.

Chapter 3: Log In to Your 4G LTE Router

Learn how to log in to your 4G LTE router to access the web-based interface for configuration and management.

Chapter 4: Set Up Internet Connections

4.1 Use Quick Setup Wizard

Utilize the Quick Setup Wizard to easily configure your internet connection settings.

4.2 Create a Connection Profile

Create a custom connection profile to tailor your internet settings according to your preferences.

4.3 Set Up IPv6 Tunnel

Configure an IPv6 tunnel for seamless internet connectivity using either the public IPv6 tunnel service or the 6rd tunnel with parameters provided by your ISP.

4.3.1 Use the Public IPv6 Tunnel Service-6to4

Step-by-step instructions on setting up an IPv6 tunnel using the public IPv6 tunnel service.

4.3.2 Specify the 6rd Tunnel with Parameters Provided by Your ISP

Guide on configuring an IPv6 tunnel using the 6rd tunnel with parameters provided by your Internet Service Provider (ISP).

4.4 Test Internet Connectivity

Verify your internet connectivity after setting up your internet connections to ensure everything is working correctly.

Chapter 5: SMS

Learn how to use the SMS feature of your 4G LTE router to send and receive text messages.

Chapter 6: Guest Network

6.1 Create a Network for Guests

Create a separate network for your guests to provide them with internet access while keeping your main network secure.

6.2 Customize Guest Network Options

Customize the settings of your guest network, such as network name, password, and access restrictions.

Chapter 7: NAT Forwarding

Configure NAT forwarding to allow external devices to access specific services or applications hosted on your local network.

Chapter 8: Parental Controls

Set up parental controls to restrict access to certain websites or limit internet usage for specific devices.

Chapter 9: QoS

Configure Quality of Service (QoS) settings to prioritize
certain types of network traffic for a better user experience.

Chapter 10: Network Security

Learn about various network security features and settings to protect your network from unauthorized access and threats.

Chapter 11: Specify Your Network Settings

Specify and customize various network settings such as IP address, DNS, and DHCP options according to your network requirements.

Chapter 12: Administrate Your Network

Learn how to administrate and manage your network settings, including firmware updates, backup and restore configurations, and system logs.

Chapter 13: OneMesh with Seamless Roaming

13.1 Set Up a OneMesh Network

Set up a OneMesh network for seamless roaming and extended wireless coverage using compatible devices.

13.2 Manage Devices in the OneMesh Network

Manage and monitor the devices connected to your OneMesh network for better control and optimization.

FAQs

Q: Can I use this router with any ISP?

A: The router’s availability may vary by region or ISP. Please check with your ISP to ensure compatibility.

Q: Can I use both the 2.4GHz and 5GHz bands simultaneously?

A: Yes, the router supports dual band functionality, allowing you to use both bands simultaneously for better wireless performance.

Q: How can I update the router’s firmware?

A: You can update the router’s firmware through the web-based interface. Refer to the administration section of this guide for detailed instructions.

User Guide
Wireless Dual Band 4G LTE Router
© 2021 TP-Link REV5.20.0 191001094

About This Guide

This guide is a complement to Quick Installation Guide. The Quick Installation Guide instructs you on quick internet setup, and this guide provides details of each function and shows you the way to configure these functions appropriate to your needs.
Features may vary by model and software version. The router availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual experience.

Conventions

In this guide the following conventions are used:

Convention

Description

Teal Underlined

Hyperlinks are in teal and underlined. You can click to redirect to a website or a specific section.

Contents to be emphasized and texts on the web page are in teal, including the menus,

Teal

items, buttons and so on.

The menu structures to show the path to load the corresponding page. For example,

Advanced > Wireless > MAC Filtering means the MAC Filtering function page is under the

Wireless menu that is located in the Advanced tab.

Note:

Ignoring this type of note might result in a malfunction or damage to the device.

Tips:

Indicates important information that helps you make better use of your device.

More Info
· The latest software, management app and utility are available from the Download Center at https://www.tp-link.com/support/.
· The Quick Installation Guide can be found where you find this guide or inside the package of the router.
· Specifications can be found on the product page at https://www.tp- link.com.
· A Community is provided for you to discuss our products at https://community.tp-link.com.
· Our Technical Support contact information can be found at the Contact Technical Support page at https://www.tp-link.com/support/.

• Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Range,
  coverage, and maximum quantity of connected devices are based on test results under normal usage conditions. Actual wireless data throughput, wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection quality, and client condition.

1

Chapter 1

Get to Know Your 4G LTE Router

This chapter introduces what the router can do and shows its appearance. It contains the following sections: · Product Overview · Panel Layout

Chapter 1

Get to Know Your 4G LTE Router

1 1 Product Overview
The 4G LTE Router shares the latest generation 4G LTE network with multiple Wi-Fi devices, anywhere you want. With Ethernet ports and antennas, the router provides wired and wireless access for multiple computers and mobile devices. With various features and functions, the router is the perfect hub of your home or business network.
1 2 Panel Layout

1 2 1 Top View

The router’s LEDs (view from left to right) are located on the front panel. You can check the router’s working status by following the LED Explanation table.

LED Explanation

Name (Power)

Status On
Flashing Off

Indication The system has started up successfully. The system is starting up or firmware is being upgraded. Do not disconnect or power off the router. Power is off.

3

Chapter 1

Get to Know Your 4G LTE Router

Name (Internet)
(Wi-Fi) (LAN) (Signal Strength)

Status On Off On
Flashing Off On Off
On
Off

Indication The router is connected to the internet. There is no internet connection. The wireless function is enabled. WPS connection is in progress. This may take up to 2 minutes. The wireless function is disabled. At least one LAN port is connected to a powered-on device. No LAN port is connected to a powered-on device. Indicates the signal strength the router received from the mobile
internet. More lit bars indicate a better signal strength.
There is no mobile internet signal.

Note:
1. If the Internet LED is off, please check your internet connection first. Refer to Connect Your 4G LTE Router for more information about how to make internet connection correctly. If you have already made a right connection, please contact your ISP to make sure your internet service is available now.
2. If the Signal Strength LED is off, please check your Internet LED first. If your Internet LED is also off, please refer to Note 1. If your Internet LED is on, please relocate the router to a location that receives a strong mobile internet signal, such as near a window.

1 2 2 The Back Panel

The following parts (view from left to right) are located on the rear panel.

Item POWER socket

Description For connecting the router to power socket via the provided power adapter.

4

Chapter 1

Get to Know Your 4G LTE Router

Item LAN1, LAN2, LAN3,
LAN4/WAN Wi-Fi ON/OFF
WPS/RESET
Nano SIM Card Slot Antennas

Description
For connecting to your PCs or other Ethernet network devices. In wireless router mode, the LAN4/WAN port is used for connecting to a Cable/FTTH/ VDSL/ADSL device.
For turning on/off the Wi-Fi function.
Press and hold this button until the Power LED starts flashing to reset the router to its factory default settings.
To enable the WPS function, press this button about 2 seconds. If you have a WPSsupported device, you can press this button to quickly establish connection between the router and the client device.
For holding the nano SIM card.
Used for data sessions over LTE. Upright them for the best mobile internet signal.

5

Chapter 2

Connect the Hardware

This chapter contains the following sections: · Requirements for Operation · Position Your 4G LTE Router · Connect Your 4G LTE Router

Chapter 2

Connect the Hardware

2 1 Requirements for Operation
To connect and use the router for internet sharing, you must have the following: · A nano SIM card with internet access enabled. · PC with an active Ethernet Adapter and an Ethernet cable with RJ45 connectors. · Web browser, such as Microsoft Internet Explorer, Mozilla Firefox and Apple Safari.
2 2 Position Your 4G LTE Router
With the router, you can access your network from anywhere within the wireless network coverage. However, the wireless signal strength and coverage vary depending on the actual environment where your router is in. Many obstacles may limit the range of the wireless signal, for example, concrete structures, thickness and number of walls. For your security and best Wi-Fi performance, please: · Do not locate the router in the place where it will be exposed to moisture or excessive
heat. · Keep away from strong electromagnetic radiation source and electromagnetic-
sensitive devices. · Place the router in a location where it can be connected to the various devices as well
as to a power source. · Place the router in a location where it can receive a strong mobile internet signal. · Make sure the cables and power cord are safely placed out of the way so they do not
create a tripping hazard. Generally, the router is placed on a horizontal surface, such as on a shelf or desktop. The device also can be mounted on the wall as shown in the following figure.
113.4

D 14

H 10

A
2 3

NOTE: 2.84 D 4.17mm
H 3mm

A(2/1)

Note: The diameter of the screw, 2.84mm<D<4.17mm, and the distance of two screws is 113.4mm. The screw that project from the wall need around 4mm based, and the length of the screw need to be at least 20mm to withstand the weight of the product.

7

Chapter 2
2 3 Connect Your 4G LTE Router
Follow the steps below to connect your router. 1 Install the antennas and position them upwards.

Connect the Hardware

Power adapter
1

3

2

Router

2 With the gold contacts facing down, insert the nano SIM card into the slot until you hear a click.
3 Connect the power adapter to turn on the router. The power source shall be near the device and shall be easily accessible.
4 Connect your computer to the router. Method 1: Wired Connect your computer’s Ethernet port to one of the LAN ports on the router via an Ethernet cable. Method 2: Wirelessly Use the default SSID (Wireless Network Name) and Wireless Password printed on the product label of the router to connect wirelessly. Method 3: Use the WPS button Wireless devices that support WPS, including Android phones, tablets, most USB network cards, can be connected to your router through this method. (WPS is not supported by iOS devices.)

8

Chapter 2

Connect the Hardware

4G
WLAN On
TP-Link_Home My Home My Network Home Network TP-Link_Network TP-Link_Test
Note: The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the appropriate encryption before configuring the WPS.
1 ) Tap the WPS icon on the device’s screen. 2 ) Immediately press the WPS button on your router. 3 ) The Wi-Fi LED flashes for about 2 minutes during the WPS process. 4 ) When the Wi-Fi LED is on, the client device has successfully connected to the
router.

9

Chapter 3

Log In to Your 4G LTE Router

Chapter 3

Log In to Your 4G LTE Router

With a web management page, it is easy to configure and manage the 4G LTE Router. The web management page can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
Follow the steps below to log in to your router.
1 If the TCP/IP Protocol on your computer is set to the static (fixed) IP address, you need to change its settings to obtain an IP address automatically. Refer to FAQ to configure your computer.
2 Launch a web browser and type in http://tplinkmodem.net or http://192.168.1.1. Set a strong password using 1-32 characters and click Let’s Get Started.

Note: For subsequent logins, use your password that you have created.
11

Chapter 4

Set Up Internet Connections

This chapter introduces how to connect your router to the internet. The router is equipped with a web-based Quick Setup wizard. It has many ISP information built in, automates many of the steps and verifies that those steps have been successfully completed. Furthermore, you can set up IPv6 connection if your ISP provides IPv6 service. This chapter includes the following sections: · Use Quick Setup Wizard · Create a Connection Profile · Test Internet Connectivity

Chapter 4

Set Up Internet Connections

4 1 Use Quick Setup Wizard
To set up your router with several easy steps quickly: 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Click Quick Setup, after configuring your time zone, confirm the parameters with
the information provided by your ISP in the SIM part and click Next.

Note: Quick Setup is not available if your SIM card is locked. Unlock your SIM card according to the prompt.
3 Follow the on-screen instructions to complete the setup.
Note: 1. During the quick setup process, you can change the preset wireless network name (SSID) and wireless password.
Once done, all your wireless devices must use the new SSID and password to connect to the router. 2. The router supports two operation modes, 3G/4G Router Mode and Wireless Router mode. If you already have a
modem or your internet comes via an Ethernet cable from the wall, you can set up the router as a regular wireless router to share the internet. Refer to FAQ

Q6 for details.
4 2 Create a Connection Profile
If your ISP settings are not detected by the router, you can create an internet connection profile by following the steps below: 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > Network > Internet page.
13

Chapter 4

Set Up Internet Connections

Tips: · You can also upgrade the supported ISP information. Refer to Upgrade Your ISP Information to configure. · You can view all internet connections or edit connections that are set up manually on this page. · You can change the Network Mode to 4G preferred, 4G Only or 3G Only according to your needs. · If the Auto network connection displays a wrong ISP profile, you can select a correct network manually:
1. Change the Network Search mode to Manual. 2. When prompted, select the correct ISP network and click Save. · The device supports two methods of band selection – Auto and Manual. If you are not familiar with this, keep the default option or contact your carrier for more details.
3 Click Create Profile. 4 Specify the Profile Name, Username and Password. Select the PDP Type, APN Type
and Authentication Type according to your ISP.
14

Chapter 4

Set Up Internet Connections

5 Click OK to make the settings effective and the new profile will be used to set up a new connection.
Tips: 1. You can view all internet connections or edit connections that are set up manually on this page. 2. You can change the Network Mode to 4G Only or 3G Only according to your needs.
4 3 Set Up IPv6 Tunnel
The IPv6 Tunnel feature helps you obtain IPv6 resources based on an IPv4 WAN connection or vice versa. IPv6 Tunnel is a transition mechanism that allows isolated IPv6 hosts and networks to reach each other over IPv4-only infrastructure before IPv6 completely supplants IPv4. It is a temporary solution for networks that do not support native dual-stack, where both IPv6 and IPv4 run independently. The router provides three tunneling mechanisms: 6to4, 6rd and DS-Lite. The way to set up 6rd and DS-Lite tunnel are similar.
Note: You must reconfigure the IPv6 Tunnel settings every time you reboot the router. Make sure the desired WAN connection is connected before the configuration.
4 3 1 Use the Public IPv6 Tunnel Service-6to4
The 6to4 tunnel is a kind of public service. If there are any 6to4 servers on your network, you can use this mechanism to access IPv6 service. If your ISP provides you with an IPv4-only connection but you want to visit IPv6 websites, you can try to set up a 6to4 tunnel.
I want to:
Set up the IPv6 tunnel though my ISP doesn’t provide me with the tunnel service.
How can I do that?
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
2 Go to Advanced > Network > IPv6 Tunnel.
3 Tick the check box, select 6to4 as the tunneling mechanism and select a WAN connection from the drop-down list, then click Save.

15

Chapter 4

Set Up Internet Connections

Note: If there is no available WAN connection to choose, make sure you have connected to the internet.
Done!
Now you can visit the IPv6 websites with the 6to4 tunnel.
Note: Still not being able to access IPv6 resources means that not any 6to4 public server was found in your network. You can contact your ISP to sign up for IPv6 connection service.
4 3 2 Specify the 6rd Tunnel with Parameters Provided by Your ISP I want to:
Specify the 6rd tunnel with the parameters provided by my 6rd tunnel service provider.
How can I do that?
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
2 Go to Advanced > Network > IPv6 Tunnel.
3 Tick the check box, select 6rd as the tunneling mechanism and select a WAN connection from the drop-down list.
4 According to the parameters provided by your ISP, choose Auto or Manual. More parameters are needed if you choose Manual.
5 Click Save.

Note: If there is no available WAN connection to choose, make sure you have connected to the internet and the connection type is not Bridge.
Done!
Now you can visit the IPv6 websites with the 6rd tunnel.
Tips: The way to set up DS-Lite tunnel is similar to that of 6rd tunnel. If you are provided with an IPv6-only WAN connection and have signed up for DS- Lite tunnel service, specify the DS-Lite tunnel by referring to the steps above.
16

Chapter 4

Set Up Internet Connections

4 4 Test Internet Connectivity
After manually set up the internet connection, you need to know the internet connectivity. The router provides a diagnostic tool to help you locate the malfunction. 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > System Tools > Diagnostics page.

3 Click Start to test the internet connectivity and you will see the test result in the gray box.

17

Chapter 5

SMS

This chapter introduces how to use the SMS functions to view and write messages, keep drafts and specify the message center number. You can easily monitor your data usage by sending a message to your carrier. This chapter includes the following sections: · View Messages · Edit and Send a New Message · View Sent Messages · View Drafts · SMS Settings

Chapter 5

SMS

5 1 View Messages
1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > SMS > Inbox page.

3 Click the or icon to unfold and read the content of the message.
Tips: indicates the message is read, while indicates the message is unread.
5 2 Edit and Send a New Message
1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > SMS > New Message page.

3 Enter the receiver’s phone number in the Phone Number field. 4 Enter your message in the Message field.
Tips: You can enter up to 160 letters or numbers, and any exceeding characters will be sent in the next message. You can send up to 5 messages each time.
19

Chapter 5

SMS

5 Click Send to send the message or click Save to save the message to the Drafts.
5 3 View Sent Messages
1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > SMS > Outbox page. All the messages you sent are listed in the
Outbox table.

Tips: You can click

to edit and forward the message.

5 4 View Drafts
1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > SMS > Drafts page. All the unsent messages are listed in the
Drafts table.

Tips: You can click

to edit and forward the message.

5 5 SMS Settings
SMS Settings allows you to configure the Message Center. When the Message Center is enabled, you can change the Message Center Number via which messages will be sent. It is not recommended to change it for a wrong message center number will affect the SMS function of the router. 1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
20

Chapter 5

SMS

2 Go to Advanced > SMS > SMS Settings page and enable Message Center.

3 The Message Center Number is auto-populated. Change it according to your needs.

21

Chapter 6

Guest Network

This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can customize guest network options to ensure network security, privacy, and fluency. This chapter contains the following sections: · Create a Network for Guests · Customize Guest Network Options

Chapter 6

Guest Network

6 1 Create a Network for Guests
1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > Guest Network. Locate the Wireless section. 3 Create a 2.4GHz or 5GHz guest network according to your needs. 1 ) Enable 2.4GHz, 5GHz or both wireless networks. 2 ) Customize the SSID. Don`t select Hide SSID unless you want your guests to manually
input the SSID for guest network access. 3 ) Set Security to WPA/WPA2 Personal, keep the default Version and Encryption
values, and customize your own password.

4 Click Save. Now your guests can access your guest network using the SSID and password you set!
Tips: To view guest network information, go to Advanced > Status and locate the Guest Network section.
6 2 Customize Guest Network Options
1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > Guest Network. Locate the Settings section. 3 Customize guest network options according to your needs.
23

Chapter 6

Guest Network

· Allow Guests to See Each Other Select this checkbox if you want to allow the wireless clients on your guest network to communicate with each other via methods such as network neighbors, Samba, Ping, and FTP.
· Allow Guests to Access My Local Network Select this checkbox if you want to allow the wireless clients on your guest network to communicate with the devices connected to your router’s LAN ports or main network via methods such as network neighbors, Samba, Ping, and FTP.
· Enable QoS for Guest Network Select this checkbox if you want to assign the upstream and downstream bandwidths for the guest network. This option is available only when Bandwidth Control is enabled on the Advanced > QoS page.
4 Click Save. Now you can ensure network security, privacy, and fluency!
Tips: To view guest network information, go to Advanced > Status and find the Guest Network section.

24

Chapter 7

NAT Forwarding

Router’s NAT (Network Address Translation) feature makes the devices in the LAN use the same public IP address to communicate in the internet, which protects the local network by hiding IP addresses of the devices. However, it also brings about the problem that external host cannot initiatively communicate with the specified device in the local network. With forwarding feature the router can penetrate the isolation of NAT and allows the external hosts on the internet to initiatively communicate with the devices in the local network, thus to realize some special functions. TP-Link router includes four forwarding rules. If two or more rules are set, the priority of implementation from high to low is Virtual Servers, Port Triggering, UPnP and DMZ. This chapter contains the following sections: · Translate Address and Port by ALG · Share Local Resources in the Internet by Virtual Server · Open Ports Dynamically by Port Triggering · Make Applications Free from Port Restriction by DMZ · Make Xbox Online Games Run Smoothly by UPnP

Chapter 7

NAT Forwarding

7 1 Translate Address and Port by ALG
ALG (Application Layer Gateway) allows customized NAT (Network Address Translation) traversal filters to be plugged into the gateway to support address and port translation for certain application layer “control/data” protocols: FTP, TFTP, H323 etc. Enabling ALG is recommended.
1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2 Go to Advanced > NAT Forwarding > ALG.
Note: It is recommended to keep the default settings.

· PPTP Pass-through: If enabled, it allows Point-to-Point sessions to be tunneled through an IP network and passed through the router.
· L2TP Pass-through: If enabled, it allows Layer 2 Point-to-Point sessions to be tunneled through an IP network and passed through the router.
· IPSec Pass-through: If enabled, it allows IPSec (Internet Protocol Security) to be tunneled through an IP network and passed through the router. IPSec uses cryptographic security services to ensure private and secure communications over IP networks.
· FTP ALG: If enabled, it allows FTP (File Transfer Protocol) clients and servers to transfer data via NAT.
· TFTP ALG: If enabled, it allows TFTP (Trivial File Transfer Protocol) clients and servers to transfer data via NAT.
· H323 ALG: If enabled, it allows Microsoft NetMeeting clients to communicate via NAT. · SIP ALG: If enabled, it allows clients communicate with SIP (Session Initiation Protocol)
servers via NAT. · RTSP ALG: If enabled, it allows RTSP (Real-Time Stream Protocol) clients and servers
to transfer data via NAT.
26

Chapter 7

NAT Forwarding

7 2 Share Local Resources in the Internet by Virtual Server
When you build up a server in the local network and want to share it on the internet, Virtual Server can realize the service and provide it to the internet users. At the same time virtual server can keep the local network safe as other services are still invisible from the internet. Virtual server can be used for setting up public services in your local network, such as HTTP, FTP, DNS, POP3/SMTP and Telnet. Different service uses different service port. Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port 110 in POP3 service. Please verify the service port number before the configuration.
I want to:
Share my personal website I’ve built in local network with my friends through the internet. For example, the personal website has been built in my home PC (192.168.1.100). I hope that my friends in the internet can visit my website in some way. The PC is connected to the router with the WAN IP address 218.18.232.154.
Personal Website 4G LTE Router

LAN
Home

WAN: 218.18.232.154

How can I do that?
1 Assign a static IP address to your PC, for example 192.168.1.100. 2 Visit http://tplinkmodem.net, and log in with the password you set for the router. 3 Go to Advanced > NAT Forwarding > Virtual Servers, click Add.

27

Chapter 7

NAT Forwarding

4 Click View Existing Services, and choose HTTP. The external port, internal port and protocol will be auto-populated. Enter the PC’s IP address 192.168.1.100 in the Internal IP field.
5 Click Save to save the settings.
Note: 1. It is recommended to keep the default settings of Internal Port and Protocol if you are not clear about
which port and protocol to use. 2. If the service you want to use is not in the Service Type, you can enter the corresponding parameters
manually. You should verify the port number that the service needs. 3. You can add multiple virtual server rules if you want to provide several services in a router. Please note
that the External Port cannot be overlapped.
Done!
Users in the internet can enter http:// WAN IP (in this example, enter http:// 218.18.232.154) to visit your personal website.
Note: 1. WAN IP should be a public IP address. For the WAN IP is assigned dynamically by ISP, it is recommended
to apply and register a domain name for the WAN by DDNS, go to Set Up a Dynamic DNS Service Account for more information. Then you can use http://domain name to visit the website. 2. If you have changed the default External Port, you should use http://WAN IP: External Port or http://domain name: External Port to visit the website.
28

Chapter 7

NAT Forwarding

7 3 Open Ports Dynamically by Port Triggering
Port triggering can specify a triggering port and its corresponding external ports. When a host in the local network initiates a connection to the triggering port, all the external ports will be opened for subsequent connections. The router can record the IP address of the host. When the data from the internet return to the external ports, the router can forward them to the corresponding host. Port triggering is mainly applied to online games, VoIPs and video players. Common applications include MSN Gaming Zone, Dialpad and Quick Time 4 players, etc. Follow the steps below to configure the port triggering rules:
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
2 Go to Advanced > NAT Forwarding > Port Triggering and click Add.

3 Click View Existing Applications, and select the desired application. The triggering port and protocol, the external port and protocol will be auto- populated. Here we take application MSN Gaming Zone as an example.
4 Click Save to save the settings.
Tips: 1. You can add multiple port triggering rules according to your network need. 2. If the application you need is not listed in the Existing Applications list, please enter the parameters manually. You
should verify the external ports the application uses first and enter them into External Port field according to the format the page displays.
29

Chapter 7

NAT Forwarding

7 4 Make Applications Free from Port Restriction by DMZ
When a PC is set to be a DMZ (Demilitarized Zone) host in the local network, it is totally exposed to the internet, which can realize the unlimited bidirectional communication between internal hosts and external hosts. The DMZ host becomes a virtual server with all ports opened. When you are not clear about which ports to open in some special applications, like IP camera and database software, you can set the PC to be a DMZ host.
Note: DMZ is more applicable in the situation that users are not clear about which ports to open. When it is enabled, the DMZ host is totally exposed to the internet, which may bring some potential safety hazard. If DMZ is not in use, please disable it in time.
I want to:
Make the home PC join the internet online game without port restriction. For example, due to some port restriction, when playing the online games, you can log in normally but cannot join a team with other players. To solve this problem, set your PC as a DMZ with all ports opened.
How can I do that?
1 Assign a static IP address to your PC, for example 192.168.1.100.
2 Visit http://tplinkmodem.net, and log in with the password you set for the router.
3 Go to Advanced > NAT Forwarding > DMZ and select the checkbox to enable DMZ.

4 Enter the IP address 192.168.1.100 in the DMZ Host IP Address filed. 5 Click Save to save the settings.
Done!
The configuration is completed. You’ve set your PC to a DMZ host and now you can make a team to game with other players.
30

Chapter 7

NAT Forwarding

7 5 Make Xbox Online Games Run Smoothly by UPnP
UPnP (Universal Plug and Play) protocol allows the applications or host devices to automatically find the front-end NAT device and send request to it to open the corresponding ports. With UPnP enabled, the applications or host devices in the both sides of NAT device can freely communicate with each other, realizing the seamless connection of the network. You may need to enable the UPnP if you want to use applications for multiplayer gaming, peer- to-peer connections, real-time communication (such as VoIP or telephone conference) or remote assistance, etc.
Tips: 1. UPnP is enabled by default in this router. 2. Only the application supporting UPnP protocol can use this feature. 3. UPnP feature needs the support of operating system (e.g. Windows Vista/ Windows 7/ Windows 8, etc. Some of
operating system need to install the UPnP components).
For example, when you connect your Xbox to the router which has connected to the internet to play online games, UPnP will send requests to the router to open the corresponding ports, allowing the following data penetrating the NAT to transmit. Therefore, you can play Xbox online games without a hitch.

LAN

WAN

Xbox

4G LTE Router

If necessary, you can follow the steps to change the status of UPnP. 1 Visit http://tplinkmodem.net, and log in with the password you set for the router; 2 Go to Advanced > NAT Forwarding > UPnP and toggle on or off according to your
needs.

31

Chapter 8

Parental Controls

This function allows you to block inappropriate, explicit and malicious websites, and control access to specified websites at specified time.

Chapter 8

Parental Controls

I want to:
Control the time of day my children or other home network users are allowed to access the internet and even types of websites they can visit. For example, I want to allow my children’s devices (e.g. a computer or a tablet) to access only www.tp-link.com and wikipedia.org, from 18:00 (6PM) to 22:00 (10PM) on weekdays only.
How can I do that?
1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Basic or Advanced > Parental Controls and enable Parental Controls.

3 Click Add.

33

Chapter 8

Parental Controls

4 Click Scan and select the device to be controlled. Or enter the Device Name and MAC Address manually.
5 Click the icon to set the Effective Time. Drag the cursor over the appropriate cell(s) and click OK.

6 Enter a Description for the entry. 7 Select the checkbox to enable this entry and click OK. 8 Select the restriction type. 1 ) With Blacklist selected, the controlled devices cannot access any websites
containing the specified keywords during the Effective Time period. 2 ) With Whitelist selected, the controlled devices can only access websites containing
the specified keywords during the Effective Time period.
9 Click Add a New Keyword. You can add up to 200 keywords for both Blacklist and Whitelist. Below are some sample entries to allow access.
1 ) Enter a web address (e.g. www.tp-link.com) or a web address keyword (e.g. wikipedia) to only allow or block access to the websites containing that keyword. 34

Chapter 8

Parental Controls

2 ) If you wish to block all internet browsing access, do not add any keyword to the Whitelist.
10 Click Save.
Done!
Now you can control your children’s internet access according to your needs.

35

Chapter 9

QoS

This chapter introduces how to create a QoS (Quality of Service) rule to specify prioritization of traffic and minimize the impact caused when the connection is under heavy load.

Chapter 9

QoS

I want to:
Specify priority levels for some devices or applications. For example, I have several devices that are connected to my wireless network. I would like to set an intermediate speed on the internet for my phone.
How can I do that?
1 Enable QoS and set bandwidth allocation. 1 ) Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 ) Go to Advanced > QoS

Settings. 3 ) Select Enable QoS. 4 ) Input the maximum upload and download bandwidth provided by your Internet
service provider. 1Mbps equal s to 1000Kbps. 5 ) Click Advanced and drag the scroll bar to set the bandwidth priority percentage. 6 ) Click Save.

2 Add a middle priority QoS rule for the phone. 1 ) Click Add in the Middle Priority: 30% column.
37

Chapter 9

QoS

2 ) Select By Device and then click Scan.

3 ) Choose the respective device from the list.
4 ) Click Save.
Note: If you want to delete a QoS rule, click to remove the responding rule from the list.
Done!
Now QoS is implemented to prioritize internet traffic.

38

Chapter 10

Network Security

This chapter guides you on how to protect your home network from cyber attacks and unauthorized users by implementing these three network security functions. You can protect your home network against DoS (Denial of Service) attacks from flooding your network with server requests using DoS Protection, block or allow specific client devices to access your network using Access Control, or you can prevent ARP spoofing and ARP attacks using IP & MAC Binding. · Protect the Network from Cyber Attacks · Service Filtering · Access Control · IP & MAC Binding

Chapter 10

Network Security

10 1 Protect the Network from Cyber Attacks
The SPI Firewall can prevent cyber attacks and validate the traffic that is passing through the router based on the protocol. This function is enabled by default, and it’s recommended to keep the default settings. DoS Protection can protect your home network against DoS attacks from flooding your network with server requests. Follow the steps below to configure Firewall and DoS Protection. 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > Security > Firewall & DoS Protection.

3 Enable IPv4 SPI Firewall.
4 Enable DoS Protection.
Note: DoS protection and Traffic Statistics must be enabled at the same time. To enable Traffic Statistics, go to System > Traffic Monitor and toggle on Traffic Monitor.
5 Set the level (Low, Middle or High) of protection for ICMP-FLOOD Attack Filtering, UDP-FlOOD Attack Filtering and TCP-FLOOD Attack Filtering. · ICMP- FLOOD Attack Filtering – Enable to prevent the ICMP (Internet Control Message Protocol) flood attack. · UDP-FlOOD Attack Filtering – Enable to prevent the UDP (User Datagram Protocol) flood attack. · TCP-FLOOD Attack Filtering – Enable to prevent the TCP-SYN (Transmission Control Protocol-Synchronize) flood attack.
Tips: The level of protection is based on the number of traffic packets. The protection will be triggered immediately when the number of packets exceeds the preset threshold value (the value can be set on Dos Protection Level Settings section of the same page), and the vicious host will be displayed in the Blocked DoS Host List.
6 Click Save.
40

Chapter 10

Network Security

10 2 Service Filtering
With Service Filtering, you can prevent certain users from accessing the specified service, even block Internet access completely. 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > Wireless > Service Filtering and enable Service Filtering.

3 Click Add.
4 Select a service type from the drop-down list and the following four fields will be auto-populated. Select Custom when your desired service type is not listed, and enter the information manually. 41

Chapter 10

Network Security

5 Specify the IP address(es) that this filtering rule will apply to. 6 Click Save.
10 3 Access Control
Access Control is used to block or allow specific client devices to access your network (via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed devices (Whitelist).
I want to:
Block or allow specific client devices to access my network (via wired or wireless)
How can I do that?
1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > Security > Access Control and enable Access Control.

3 Select the access mode to either block (recommended) or allow the device(s) in the list. To block specific device(s)
1 ) Select Blacklist and click Save. 2 ) Select the device(s) to be blocked in the Online Devices table. 3 ) Click Block above the Online Devices table. The selected devices will be added to
Devices in Blacklist automatically. To allow specific device(s) 1 ) Select Whitelist and click Save.
42

Chapter 10 2 ) Click Add.

Network Security

3 ) Enter the Device Name and MAC Address (You can copy and paste the information from Online Devices table if the device is connected to your network).
4 ) Click Save.
Done!
Now you can block or allow specific client devices to access your network (via wired or wireless) using the Blacklist or Whitelist.
10 4 IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind network device’s IP address to its MAC address. This will prevent ARP spoofing and other ARP attacks by denying network access to a device with matching IP address in the Binding list, but unrecognized MAC address.
I want to:
Prevent ARP spoofing and other ARP attacks.
How can I do that?
1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > Security > IP & MAC Binding and enable IP & MAC Binding.

43

Chapter 10

Network Security

3 Bind your device(s) according to your needs. To bind the connected device(s)
1 ) Select the device(s) to be bound in the ARP List. 2 ) Click Bind to add to the Binding List.
To bind the unconnected device 1 ) Click Add.
2 ) Enter the MAC address and IP address that you want to bind. 3 ) Select the checkbox to enable the entry and click Save.
Done!
Now you don’t need to worry about ARP spoofing and other ARP attacks.
44

Chapter 11

Specify Your Network Settings

This chapter introduces how to change the default settings or adjust the basic configuration of the router using the web-based management page. This chapter contains the following sections: · Upgrade Your ISP Information · PIN Management · Data Settings · LAN Settings · Wireless Settings · Set Up a Dynamic DNS Service Account · Create Static Routes · IPv6 Tunnel · USSD · Set up a VPN Connection

Chapter 11

Specify Your Network Settings

11 1 Upgrade Your ISP Information
If your ISP information is not detected by the router, you can upgrade ISP information by following the steps below: 1 Download the latest ISP upgrade file from the Support page at
https://www.tp-link.com to your computer. 2 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router. 3 Go to Advanced > Network > ISP Upgrade.

4 Click Browse to locate and select the latest file. 5 Click Upgrade.
Note: 1. If you fail to dial-up Internet access after upgrading to the latest version, please contact the technical support. 2. If your ISP settings are still not detected after upgrading, refer to Create a Connection Profile to add a new internet
connection profile.
11 2 PIN Management
PIN (Personal Identification Number) is used to protect the SIM card from embezzlement. PIN Management allows you to easily change the PIN settings of your SIM card as needed. Follow the steps below to change your PIN settings. 1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID. 2 Go to Advanced > Network > PIN Management page.

46

Chapter 11

Specify Your Network Settings

· SIM Card Status – Displays the status of your SIM card. · PIN Lock – Toggle on to enable PIN Lock. Once it is enabled, every time you start the
router with this SIM card inserted, you need to enter the PIN. · Auto-unlock PIN – When the PIN is required upon router restarting or inserting a SIM
card, it will be validated automatically, saving you the trouble to enter the PIN each time you start the router or insert a SIM card. If validation failed, you need to enter the PIN on this page. · PIN – Enter the PIN to unlock the SIM card. It consists of 4-8 digits. · PUK – PIN Unlocked Key, also known as Personal Unlock Code (PUC), is used to reset a PIN that has been lost or forgotten. The PUK is a SIM-specific code assigned by the service provider. You need to enter the PUK after 3 incorrect login attempts of PIN. Contact your service provider if you do not know the PUK. It consists of 8 digits. · New PIN – Enter 4-8 digits to reset the PIN of your SIM card. · Remaining Attempts – Shows how many attempts are left for you to try entering the PIN or PUK. You have only 3 attempts for entering the PIN and 10 attempts for entering the PUK. If you accidentally fail in 3 attempts, the SIM card will be locked and you will be required to enter the PUK that is written on your SIM card.
3 Click Save to save the settings.
11 3 Data Settings
Data Settings is used to monitor the data usage of your router in real-time. You can limit your data usage according to your monthly allowance or total allowance and you will receive a warning if your data usage reaches the specified level. Follow the steps below to monitor your data usage.
1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2 Go to Advanced > Network > Data Settings page.

47

Chapter 11

Specify Your Network Settings

3 Enable Data Limit to set total/monthly data allowance and usage alert to prevent data overuse.
4 Enter the allowed amount of total/monthly data in the Total/Monthly Allowance field. When data usage exceeds the allowed level, the router will disconnect from the internet and notify you on the Basic > Network Map Page.
5 Enter a percentage in the Usage Alert field to prevent data overuse. When data usage reaches the alert level, a warning will be shown on the Basic > Network Map Page. If you want to want receive the alert on your phone, enter your mobile phone number in the SMS Alert for Usage field.
6 Enable Monthly Data Statistics to reset data statistics when the next billing cycle starts.
7 Enter the start date of the billing cycle in the Start Date field.
8 Click Save to save the settings.
11 4 LAN Settings

11 4 1 Change the LAN IP Address
The router is preset with a default LAN IP 192.168.1.1, which you can use to log in to its web management page. The LAN IP address together with the Subnet Mask also defines the subnet that the connected devices are on. If the IP address conflicts with another device on your local network or your network requires a specific IP subnet, you can change it. Follow the steps below to change your IP address.
1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2 Go to Advanced > Network > LAN Settings page.

3 Type in a new IP Address as needed. 48

Chapter 11

Specify Your Network Settings

4 Select the Subnet Mask from the drop-down list. The subnet mask together with the IP address identifies the local IP subnet.
5 You can configure the router’s Second IP and Subnet Mask for LAN interface through which you can also access the web management page.
6 You can enable IGMP (Internet Group Management Protocol) Snooping feature to optimize overall network performance when your network has plenty of multicast traffic.
7 Click Save to make the settings effective.
11 4 2 Use the 4G LTE Router as a DHCP Server
You can configure the router to act as a DHCP server to assign IP addresses to its clients. To use the DHCP server function of the router, you must configure all computers on the LAN to obtain an IP Address automatically. Follow the steps below to configure DHCP server. 1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID. 2 Go to Advanced > Network > LAN Settings page.

3 Select DHCP to enable the DHCP function and select DHCP Server. 4 Specify the IP Address Pool, the start address and end address must be on the
same subnet with LAN IP. The router will assign addresses within this specified range to its clients. It is from 192.168.1.100 to 192.168.1.199 by default. 5 Enter a value for the Address Lease Time. The Address Lease Time is the amount of time in which a DHCP client can lease its current dynamic IP address assigned by the router. After the dynamic IP address expires, the user will be automatically assigned a new dynamic IP address. The default is 1440 minutes. 6 Keep the rest of the settings as default and click Save to make the settings effective.
49

Chapter 11

Specify Your Network Settings

Note: 1. The router can be configured to work as a DHCP Relay. A DHCP relay is a computer that forwards DHCP data
between computers that request IP addresses and the DHCP server that assigns the addresses. Each of the device’s interfaces can be configured as a DHCP relay. If it is enabled, the DHCP requests from local PCs will be forwarded to the DHCP server that runs on WAN side. 2. You can also appoint IP addresses within a specified range to devices of the same type by using Condition Pool feature. For example, you can assign IP addresses within the range (192.168.1.50 to192.168.1.80) to Camera devices, thus facilitating the network management. Enable DHCP feature and configure the parameters according to your actual situation on Advanced > Network > LAN Settings page.
11 4 3 Reserve LAN IP Addresses
You can view and add a reserved address for a client. When you specify an IP address for a device on the LAN, that device will always receive the same IP address each time when it accesses the DHCP server. If there are some devices in the LAN that require permanent IP addresses, please configure Address Reservation on the router for the purpose. Follow the steps below to reserve an IP address for your device.
1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2 Go to Advanced > Network > LAN Settings page.
3 Scroll down to locate the Address Reservation table and click Add to add an address reservation entry for your device.

4 Enter the MAC address of the device for which you want to reserve IP address. 5 Specify the IP address which will be reserved by the router. 6 Check Enable this entry and click Save to make the settings effective.
50

Chapter 11

Specify Your Network Settings

11 5 Wireless Settings
11 5 1 Specify Basic Wireless Settings
The router’s wireless network name (SSID) , password, and security option are preset in the factory. The preset SSID and password can be found on the product label. You can customize the wireless settings according to your needs. 1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID. 2 Go to Basic > Wireless page.

· To enable or disable the wireless function: Enable the 2.4GHz or 5GHz Wireless Network. If you don’t want to use the wireless function, just uncheck the box. If you disable the wireless function, all the wireless settings won’t be effective. · To enable Smart Connect function: Smart Connect allows your mobile device to automatically switch to the Wi-Fi band that provides the fastest speed. Toggle on to enable this feature. · To change the wireless network name (SSID) and wireless password: Enter a new SSID. The default SSID is TP-Link_XXXX and the value is case-sensitive.
Note: If you use a wireless device to change the wireless settings, you will be disconnected when the settings are effective. Please write down the new SSID and password for future use.
51

Chapter 11

Specify Your Network Settings

· To hide SSID: Select Hide SSID, and your SSID will not broadcast. Your SSID won’t display when you scan for local wireless network list on your wireless device and you need to manually join the network.
· To change the mode or channel: Go to Advanced > Wireless > Wireless Settings page and select the wireless network 2.4GHz or 5GHz. · Mode – Select the desired mode.
· 802.11n only – Select only if all of your wireless clients are 802.11n devices. · 802.11gn mixed – Select if you are using both 802.11g and 802.11n wireless
clients. · 802.11bgn mixed – Select if you are using a mix of 802.11b, 11g, and 11n
wireless clients.
Note:
When 802.11n only mode is selected, only 802.11n wireless stations can connect to the router. It is strongly recommended that you select 802.11bgn mixed, and all of 802.11b, 802.11g, and 802.11n wireless clients can connect to the router.
· 802.11ac/n mixed (5GHz) – Select if you are using both 802.11ac and 802.11n wireless clients.
· 802.11a/n/ac mixed (5GHz) – Select if you are using a mix of 802.11a, 802.11n and 802.11ac wireless clients. It is strongly recommended that you select 11a/n/ ac mixed.
· Channel – Select the channel you want to use from the drop-down list. This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.
· Channel Width – Select the channel width from the drop-down list. The default setting is Automatic, which can adjust the channel width for your clients automatically.
· Transmit Power – Select either High, Middle, or Low to specify the data transmit power. The default and recommended setting is High.
· To change the security option:
1 Go to Advanced > Wireless > Wireless Settings page.
2 Select the wireless network 2.4GHz or 5GHz.
3 Select an option from the Security drop-down list. The router provides four options, None, WPA/WPA2 Personal (Recommended), WPA/WPA2 Enterprise, WEP. WPA2 uses the newest standard and the security level is the highest. We recommend you don’t change the default settings unless necessary.
52

Chapter 11

Specify Your Network Settings

11 5 2 Use WPS for Wireless Connection
You can use WPS feature to add a new wireless device to your existing network quickly.
Method 1 Use the Wi-Fi Protected Setup Button
Use this method if your client device has a Wi-Fi Protected Setup button. 1 Press the WPS/RESET button on the back panel of the router for 1 second.
Note: You can also use the Push button on the web management page. Go to Advanced > Wireless > WPS page and click the Start WPS button on the screen.

2 Press the WPS button of the client device within two minutes. 3 The Wi-Fi LED flashes for about two minutes during the WPS process. 4 When the Wi-Fi LED is on, the client device has successfully connected to the
router.
Method 2 Enter the client device’s PIN on the router
1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > Wireless > WPS page.

3 Select Method Two–PIN and select Client’s PIN radio button. 53

Chapter 11

Specify Your Network Settings

4 Enter the client device’s PIN in the field, then click Connect. 5 Connect successfully will appear on the above screen, which means the client
device has successfully connected to the router.
Method 3 Enter the router’s PIN on your client device
Use this method if your client device asks for the router’s PIN. 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > Wireless > WPS page.

3 Take a note of the Current PIN of the router. You can also click the Generate button to get a new PIN.
4 On the client device, enter the router’s PIN. (The default PIN is also labeled on the bottom of the router.)
5 The Wi-Fi LED flashes for about two minutes during the WPS process. 6 When the Wi-Fi LED is on, the client device has successfully connected to the
router.
Note: 1. The Wi-Fi LED on the router will light on for no more than five minutes if the device has been successfully added to
the network. 2. The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the
wireless function is enabled before configuring the WPS.
11 5 3 Schedule Your Wireless Function
You can automatically turn off your wireless network at time when you do not need the wireless connection. 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > Wireless > Wireless Schedule page. 3 Toggle on the button to enable the Wireless Schedule feature.
54

Chapter 11

Specify Your Network Settings

4 Set the wireless off time. Select From and To time and click Save to make the settings effective. You can repeat the schedule every day or just certain days in a week.
Note: 1. Please make sure that the time of the router is correct before using this function. For more details, refer to Set
System Time. 2. The wireless LED will turn off if both wireless networks are disabled. 3. The wireless network will be automatically turned on after the time period you set.
11 5 4 View Wireless Information
· To view the detailed wireless network settings: 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > Status page. You can see the Wireless box. 3 Select 2.4GHz or 5GHz to view the wireless details.
Tips: You can also see the wireless details by clicking the router icon on Basic > Network Map.
· To view the detailed information of the connected wireless clients: 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > Wireless > Statistics page. 3 You can view the detailed information of the wireless clients, including its connected
wireless band and security option as well as the packets transmitted.
Tips: You can also see the wireless details by clicking the wireless clients icon on Basic > Network Map.
55

Chapter 11

Specify Your Network Settings

11 5 5 Advanced Wireless Settings
Advanced wireless settings are for those have a network concept. If you are not familiar with the settings on this page, it’s strongly recommended that you keep the provided default values; otherwise it may result in lower wireless network performance. 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > Wireless > Advanced Settings page.

· Beacon Interval – Enter a value between 25 and 1000 in milliseconds to determine the duration between which beacon packets are broadcasted by the router to synchronize the wireless network. The default is 100 milliseconds.
· RTS Threshold – Enter a value between 1 and 2346 to determine the packet size of data transmission through the router. By default, the RTS (Request to Send) Threshold size is 2346. If the packet size is greater than the preset threshold, the router sends Request to Send frames to a particular receiving station and negotiates the sending of a data frame, or else the packet will be sent immediately.
· DTIM Interval – Enter a value between 1 and 255 to determine the interval of the Delivery Traffic Indication Message (DTIM). 1 indicates the DTIM Interval is the same as Beacon Interval.
· Group Key Update Period – Enter the number of seconds (minimum 30) to control the time interval for the encryption key automatic renewal. The default is 0, indicating no key renewal.
56

Chapter 11

Specify Your Network Settings

· WMM – This feature guarantees the packets with high-priority messages being transmitted preferentially. WMM is enabled compulsively under 802.11n or 802.11ac mode. It is strongly recommended to enable WMM.
· Short GI – This feature is enabled by default and recommended to increase the data capacity by reducing the Guard Interval (GI) time.
· AP Isolation – Select this checkbox to enable the AP Isolation feature that allows you to confine and restrict all wireless devices on your network from interacting with each other, but still able to access the internet. AP isolation is disabled by default.
11 6 Set Up a Dynamic DNS Service Account
Most ISPs (internet service providers) assign a dynamic IP address to the router and you can use this IP address to access your router remotely. However, the IP address can change any time and you don’t know when it changes. In this case, you might need the DDNS (Dynamic Domain Name Server) feature on the router to allow you and your friends to access your router and local servers (FTP, HTTP, etc.) using domain name, in no need of checking and remembering the IP address.
Note: DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router.
To set up DDNS, please follow the instructions below:
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
2 Go to Advanced > Network> Dynamic DNS.
3 Select the DDNS service provider (Dyndns or NO-IP). If you don’t have a DDNS account, select a service provider and click Go to register.

4 Enter the username, password and domain name of the account (such as lisa.ddns. net).
5 Click Log in and Save.
Tips: If you want to use a new DDNS account, please log out first, then log in with the new account.
57

Chapter 11

Specify Your Network Settings

11 7 Create Static Routes
A static route is a pre-determined path that network information must travel to reach a specific host or network. Data from one point to another will always follow the same path regardless of other considerations. Normal internet usage does not require this setting to be configured.
I want to:
Visit multiple networks and multiple servers at the same time. For example, in a small office, my PC can surf the internet, but I also want to visit my company’s server. Now I have a switch and another router. I connect the devices as shown in the following figure so that the physical connection between my PC and my company’s server is achieved. To surf the internet and visit my company’s network at the same time, I need to configure the static routing.

4G LTE router

Router 2

Company’s server

LAN: 192.168.1.1

WAN: 172.30.30.100

LAN: 192.168.1.2

172.30.30.1

Switch

192.168.1.100

My PC

How can I do that?
1 Make sure the routers use different LAN IP addresses on the same subnet. Disable DHCP function of Router 2.
2 Visit http://tplinkmodem.net, and log in with the password you set for the router. 3 Go to Advanced > Network > Static Routing.

4 Click Add to add a new static routing entry. Finish the settings according to the following explanations:
58

Chapter 11

Specify Your Network Settings

· Network Destination – The destination IP address that you want to assign to a static route. This IP address cannot be on the same subnet with the WAN IP or LAN IP of the router. In the example, the IP address of the company network is the destination IP address, so here enters 172.30.30.1.
· Subnet Mask – Determines the destination network with the destination IP address. If the destination is a single IP address, enter 255.255.255.255; otherwise, enter the subnet mask of the corresponding network IP. In the example, the destination network is a single IP, so here enters 255.255.255.255.
· Gateway – The IP address of the gateway device to which the data packets will be sent. This IP address must be on the same subnet with the router’s IP which sends out the data. In the example, the data packets will be sent to the LAN port of Router 2 and then to the Server, so the gateway should be 192.168.1.2
· Interface – Determined by the port that sends out the data packets. In the example, the data is sent to the gateway through the LAN port.
5 Select the checkbox to enable this entry.
6 Click Save to save the settings.
Done!
Open a web browser on your PC. Enter the company server’s IP address to visit the company network.
11 8 IPv6 Tunnel
IPv6 Tunnel is a transition mechanism that enables IPv6-only hosts to reach IPv4 services or vice versa and allows isolated IPv6 hosts and networks to reach each other over IPv4-only infrastructure before IPv6 completely supplants IPv4. It is a temporary
59

Chapter 11

Specify Your Network Settings

solution for networks that do not support native dual-stack, where both IPv6 and IPv4 run independently. 1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID. 2 Go to Advanced > Network > IPv6 Tunnel page. 3 Select the checkbox to enable IPv6 Tunnel.

4 Select one of the Tunneling Mechanism: · DS-Lite – Select this tunneling mechanism if your ISP uses DS-Lite deployment for assigning address. · 6rd – Select this tunneling mechanism if your ISP uses 6rd deployment for assigning address. · 6to4 – Select this tunneling mechanism if your ISP uses 6to4 deployment for assigning address.
11 9 USSD
USSD (Unstructured Supplementary Service Data) is used to communicate with the service provider’s computer. You can query service data on this page. Follow the steps below to get service data. 1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID. 2 Go to Advanced > Network > USSD page.

60

Chapter 11

Specify Your Network Settings

3 Enter the USSD request and click Send. You will see the message returned from the carrier in the USSD Result box.
11 10 Set up a VPN Connection
VPN (Virtual Private Network) is a private network established across the public network, generally via the internet. However, the private network is a logical network without any physical network lines, so it is called Virtual Private Network. With the wide application of the internet, more and more data need to be shared through the internet. Connecting the local network to the internet directly, though can allow the data exchange, will cause the private data to be exposed to all the users on the internet.
11 10 1 Use OpenVPN to Access Your Home Network
In the OpenVPN connection, the home network can act as a server, and the remote device can access the server through the router which acts as an OpenVPN Server gateway. To use the VPN feature, you should enable OpenVPN Server on your router, and install and run VPN client software on the remote device. Please follow the steps below to set up an OpenVPN connection.

Home Network

Router

Remote Device

Step1. Set up OpenVPN Server on Your Router
1. Visit http://tplinkmodem.net, and log in with the password you set for the router. 2. Go to Advanced > VPN Server > OpenVPN, and select Enable VPN Server.
61

Chapter 11

Specify Your Network Settings

Note: · Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a
static IP address for router’s WAN port and synchronize your System Time with internet. · The first time you configure the OpenVPN Server, you may need to Generate a certificate before you enable the VPN
Server.
3. Select the Service Type (communication protocol) for OpenVPN Server: UDP, TCP. 4. Enter a VPN Service Port to which a VPN device connects, and the port number
should be between 1024 and 65535. 5. In the VPN Subnet/Netmask fields, enter the range of IP addresses that can be leased
to the device by the OpenVPN server. 6. Select your Client Access type. Select Home Network Only if you only want the
remote device to access your home network; select Internet and Home Network if you also want the remote device to access internet through the VPN Server. 7. Click Save. 8. Click Generate to get a new certificate.
Note: If you have already generated one, please skip this step, or click Generate to update the certificate.
9. Click Export to save the OpenVPN configuration file which will be used by the remote device to access your router.
Step 2. Configure OpenVPN Connection on Your Remote Device
62

Chapter 11

Specify Your Network Settings

1. Visit http://openvpn.net/index.php/download/community-downloads.html to download the OpenVPN software, and install it on your device where you want to run the OpenVPN client utility.
Note: You need to install the OpenVPN client utility on each device that you plan to apply the VPN function to access your router. Mobile devices should download a third-party app from Google Play or Apple App Store.
2. After the installation, copy the file exported from your router to the OpenVPN client utility’s “config” folder (for example, C:Program FilesOpenVPNconfig on Windows). The path depends on where the OpenVPN client utility is installed.
3. Run the OpenVPN client utility and connect it to OpenVPN Server.
11 10 2 Use PPTP VPN to Access Your Home Network
PPTP VPN Server is used to create a VPN connection for remote device. To use the VPN feature, you should enable PPTP VPN Server on your router, and configure the PPTP connection on the remote device. Please follow the steps below to set up a PPTP VPN connection.
Step 1. Set up PPTP VPN Server on Your Router
1. Visit http://tplinkmodem.net, and log in with the password you set for the router. 2. Go to Advanced > VPN Server > PPTP VPN, and select Enable VPN Server.

Note: Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for router’s WAN port and synchronize your System Time with internet.
3. In the Client IP Address filed, enter the range of IP addresses (up to 10) that can be leased to the devices by the PPTP VPN server.
4. In the Username/Password filed, enter the username and password to authenticate clients to the PPTP VPN server.
5. Click Save.
Step 2. Configure PPTP VPN Connection on Your Remote Device
63

Chapter 11

Specify Your Network Settings

The remote device can use the Windows built-in PPTP software or a third-party PPTP software to connect to PPTP Server. Here we use the Windows built-in PPTP software as an example.
1. Go to Start > Control Panel > Network and Internet > Network and Sharing Center.
2. Select Set up a new connection or network.

3. Select Connect to a workplace and click Next.

64

Chapter 11 4. Select Use my Internet connection (VPN).

Specify Your Network Settings

5. Enter the internet IP address of the router (for example: 218.18.1.73) in the Internet address field. Click Next.
6. Enter the User name and Password you have set for the PPTP VPN server on your router, and click Connect. 65

Chapter 11

Specify Your Network Settings

7. The PPTP VPN connection is created and ready to use.

66

Chapter 12

Administrate Your Network

This chapter introduces how to change the system settings and administrate your router’s network. This chapter contains the following sections: · Set System Time · Control LEDs · Test the Network Connectivity · Update the Firmware · Back up and Restore Configuration Settings · Change the Administrator Account · Local Management · Remote Management · System Log · CWMP Settings · SNMP Settings · Monitor the Internet Traffic Statistics

Chapter 12

Administrate Your Network

12 1 Set System Time
System time is the time displayed while the router is running. The system time you configure here will be used for other time-based functions like Parental Controls and Wireless Schedule. You can manually set how to get the system time. Follow the steps below to set your system time. 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > System Tools > Time Settings page.

3 Configure the system time using the following methods : · Manually – Select your time zone and enter your local time. · Get from PC – Click this button if you want to use the current managing PC’s time. · Get from the Internet – Click this button if you want to get time from the internet. Make sure your router can access the internet before you select this way to get system time.
4 Click Save to make your settings effective.
5 After setting the system time, you can set Daylight Saving time according to your needs. Tick the checkbox to enable Daylight Saving, set the start and end time and then click Save to make the settings effective.

68

Chapter 12

Administrate Your Network

12 2 Control LEDs
The router`s LEDs indicate router’s activities and status. You can turn on or turn off the LEDs as you need.
· To turn off LEDs: 1. Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID. 2. Go to Advanced > System Tools > LED Control page. 3. Disable LED Status.
· To turn off LEDs during the specified period : 1. Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID. 2. Go to Advanced > System Tools > LED Control page. 3. Tick the Night Mode checkbox. 4. Specify a time period in the LED Off Time as needed, and the LEDs will be off during this
period.
Note: Once Night Mode is enabled, the LEDs will be off during the specified period everyday without affecting the router’s performance.

12 3 Test the Network Connectivity
Diagnostics feature helps you run diagnostic test and troubleshoot your network connectivity problems. 1. Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID. 2. Go to Advanced > System Tools > Diagnostic page. 3. Click the Start button to test the Internet connection of the router.
69

Chapter 12

Administrate Your Network

12 4 Update the Firmware
TP-Link is dedicated to improving and richening the product features, giving you a better network experience. We will inform you through the web management page if there’s any update firmware available for your router. Also, the latest firmware will be released at TP-Link official website, you can download it from the Support page of our website www.tp-link.com for free.
Note: 1. Make sure that you have a stable connection between the router and your computer. It is NOT recommended to
upgrade the firmware wirelessly. 2. Make sure you remove any USB storage device connected to the router before the firmware upgrade to prevent data
loss. 3. Back up your router configuration before upgrading the firmware. 4. Do NOT turn off the router during the firmware upgrade.
12 4 1 Online Upgrade
1. Visit http://tplinkmodem.net, and log in with the password you set for the router. 2. If there’s any firmware update available for your router, the update icon will display on the
top-right corner of the page. Click the icon to go to the Firmware Upgrade page. Alternatively, you can go to Advanced > System Tools > Firmware Upgrade, and click Check for Upgrades to see if there’s any new firmware.

Tips:
If there’s any new important firmware update for your router, you will see the notification (similar as shown below) on your computer when open a new web page. Click Upgrade Now, and log in to the web management page. You will see the Firmware Upgrade page.

3. Focus on the Online Upgrade section, and click Upgrade. 70

Chapter 12

Administrate Your Network

4. Wait a few moments for the upgrading and rebooting.
12 4 2 Local Upgrade
1. Download the latest firmware file for the router from our website www.tp- link.com. 2. Visit http://tplinkmodem.net, and log in with the password you set for the router. 3. Go to Advanced > System Tools

Firmware Upgrade. 4. Focus on the Device Information section. Make sure the downloaded firmware file matches
with the Hardware Version. 5. Focus on the Local Upgrade section. Click Browse to locate the downloaded new firmware
file, and click Upgrade.

6. Wait a few moments for the upgrading and rebooting.
12 5 Back up and Restore Configuration Settings
The configuration settings are stored as a configuration file in the router. You can back up the configuration file to your computer for future use and restore the router to a previous settings from the backup file when needed. Moreover, if needed you can erase the current settings and reset the router to the default factory settings.
· To back up configuration settings: 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Click Advanced > System Tools > Backup & Restore page. 3 Click Backup to save a copy of the current settings to your local computer. A conf.
bin file will be stored to your computer.
· To restore configuration settings: 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Click Advanced > System Tools > Backup & Restore page.

3 Click Browse to locate the previous backup configuration file, and click Restore. 71

Chapter 12

Administrate Your Network

4 Wait for the restoring and then the router will automatically reboot. · To reset the router to factory default settings: 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Click Advanced > System Tools > Backup & Restore page.

3 Click Factory Restore to reset the router. 4 Wait for the resetting and then the router will automatically reboot.
Note: 1. Do not interrupt or turn off the router during the resetting process. 2. We strongly recommend you to back up the current configuration settings before resetting the router.
12 6 Change the Administrator Account
Admin account is used to log in to the router’s web-based management page. You are required to set the admin account at the first login. You can change it on the web page. 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > System Tools > Administration page. Locate the Account
Management section.

3 Enter the old password. Enter the new password and enter again to confirm. 4 Click Save to make the settings effective.
72

Chapter 12

Administrate Your Network

12 7 Local Management
You can control the local devices’ authority to manage the router via the Local Management feature. By default all local connected devices are allowed to manage the router. You can also allow only one device to manage the router. Follow the steps below to specify the local management.
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
2 Go to Advanced > System Tools> Administration page. Locate the Local Management section.

3 Enable Local Management via HTTPS if you want to access the router via both HTTPS and HTTP, or keep it disabled if you only want to access the router via HTTP.
4 Keep the Port for HTTP and Port for HTTPS as the default settings.
5 If you only want to allow one specific device to manage the router, enable Only Allow the Following IP/MAC and then enter the IP Address or MAC Address of the device in the IP/MAC Address field.
6 Click Save to make the settings effective.

73

Chapter 12

Administrate Your Network

12 8 Remote Management
By default, the remote devices are not allowed to manage the router from the internet. Follow the steps below to allow remote devices to manage the router. 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > System Tools > Administration page. Locate the Remote
Management section.

3 Enable Remote Management only if you want to allow Remote Management via HTTP. In addition, if you want to allow Remote Management via HTTPS enable Remote Management via HTTPS.
4 Keep the Port as the default setting. 5 If you only want to allow one specific device to manage the router, select Only the
Following IP/MAC Address and then enter the IP Address or MAC Address. If you want to allow all remote devices can access the router, select All. 6 Click Save to make the settings effective.
Tips: 1. You can find the WAN IP address of the router on Basic > Network Map

Internet. 2. The router’s WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log
in to the router through a domain name.
74

Chapter 12

Administrate Your Network

12 9 System Log
System Log can help you know what happens to your router, facilitating you to locate the malfunctions. For example when your router does not work properly, you will need to save the system log and send it to the technical support for troubleshooting. 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Click Advanced > System Tools > System Log page.

· To view the system logs: 1 Select the log Type. Select ALL to view all kinds of logs, or select DHCPD or IGMP
to view the specific logs. 2 Select the log Level and you will see the logs with the specific or higher levels. 3 Click Refresh to refresh the log list. · To save the system logs: You can choose to save the system logs to your local computer or a remote server. 1 Click Save Log to save the logs in a txt file to your computer. 2 Click Log Settings to set the save path of the logs.
75

Chapter 12

Administrate Your Network

· Save Locally – Select this option to cache the system log to the router’s local memory, select the minimum level of system log to be saved from the drop-down list. The logs will be shown in the table in descending order on the System Log page.
· Save Remotely – Select this option to send the system log to a remote server, select the minimum level of system log to be saved from the drop-down list and enter the information of the remote server. If the remote server has a log viewer client or a sniffer tool implemented, you can view and analyze the system log remotely in real-time.
12 10 CWMP Settings
The router offers CWMP feature. The function supports TR-069 protocol which collects information, diagnoses the devices and configures the devices automatically via ACS (Auto-Configuration Server). 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > System Tools > CWMP Settings page.
76

Chapter 12

Administrate Your Network

· Enable CWMP – Toggle On to enable the CWMP (CPE WAN Management Protocol) feature.
· Inform – Enable this feature to send an Inform message to the ACS (Auto Configuration Server) periodically.
· Inform Interval – Enter the time in seconds when the Inform message will be sent to the ACS.
· ACS URL – Enter the web address of the ACS which is provided by your ISP. · ACS Username/Password – Enter the username/password to log in to the ACS server. · Interface used by TR-069 client – Select which interface to be used by the TR-069
client. · Display SOAP messages on serial console – Toggle to enable or disable this feature. · Connection Request Authentication – Select this checkbox to enable authentication
for the connection request. · Username/Password – Enter the username/password for the ACS server to log in to
the router. · Path – Enter the path for the ACS server to log in to the router. · Port – Enter the port that connects to the ACS server. · URL – Enter the URL that connects to the ACS server. · Get RPC Methods – Click to get the methods to support CWMP.
77

Chapter 12

Administrate Your Network

3 Click Save to make the settings effective.
12 11 SNMP Settings
SNMP (Simple Network Management Protocol) has been widely applied in the computer networks currently, which is used for ensuring the transmission of the management information between two nodes. In this way, network administrators can easily search and modify the information on any node on the network. Meanwhile, they can locate faults promptly and implement the fault diagnosis, capacity planning and report generating. An SNMP Agent is an application running on the router that performs the operational role of receiving and processing SNMP messages, sending responses to the SNMP manager, and sending traps when an event occurs. So a router contains SNMP “agent” software can be monitored and/or controlled by SNMP Manager using SNMP messages.
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
2 Go to Advanced > System Tools > SNMP Settings page.

· Enable SNMP Agent/SNMP Agent for WAN – Toggle On to enable the built-in SNMP agent that allows the router to operate as the operational role in receiving and processing of SNMP messages, sending responses to the SNMP manager, and triggering SNMP traps when an event occurs.
· Read-only Community – Displays the default public community string that protects the router from unauthorized access.
· Write Community – Displays the default read and write community string that protects the router from unauthorized changes.
· System Name – Displays the administratively-assigned name for this managed device. 78

Chapter 12

Administrate Your Network

· System Description – Displays the textual description of the managed device. This value should include the full name and version identification of the system’s hardware type, software operating-system, and networking software.
· System Location – Displays the physical location of this device (e.g. telephone closet, 3rd floor).
· System Contact – Displays the textual identification of the contact person for this managed device, together with information on how to contact this person.
· Trap Manager IP – Displays the IP address of the host to receive the traps. 3 It is recommended to keep the default settings. Click Save to make the settings
effective.
12 12 Monitor the Internet Traffic Statistics
The Traffic Monitor page displays the network traffic of the LAN, WAN and WLAN sent and received packets, allowing you to monitor the volume of internet traffic statistics. 1 Visit http://tplinkmodem.net, and log in with the password you set for the router. 2 Go to Advanced > System Tools > Statistics page. 3 Toggle on Traffic Monitor, and then you view the traffic usage of a device in the past
10 minutes or that of all devices in the past 10 minutes/24 hours/7 days.

79

Chapter 13

OneMesh with Seamless Roaming

This chapter introduces the TP-Link OneMeshTM feature. · Set Up a OneMesh Network · Manage Devices in the OneMesh Network

Chapter 14

OneMesh with Seamless Roaming

TP-Link OneMesh router and TP-Link OneMesh extenders work together to form one unified Wi-Fi network. Walk through your home and stay connected with the fastest possible speeds thanks to OneMesh’s seamless coverage.
Unified Wi-Fi Network
Router and extenders share the same wireless settings, including network name, password, access control settings and more.
Seamless Roaming
Devices automatically switch between your router and extenders as you move through your home for the fastest possible speeds.
Easy Setup and Management
Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the Tether app or at your router’s web management page.
To check full list of TP-Link OneMesh devices, scan the QR code, or visit https://www.tp-link.com/One-Mesh/compatibility.

Unified OneMesh Network

INTERNET

SAME
Network Name & Password for seamless roaming

81

Chapter 14

OneMesh with Seamless Roaming

13 1 Set Up a OneMesh Network
TP-Link OneMesh extender will automatically join the router’s OneMesh network once connected. Check on the router`s web management page to see if the OneMesh network is well-configured. · If the extender is connected to this router: 1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set
for the router. 2. Go to Basic > OneMesh or Advanced > OneMesh. 3. When an extender joins the OneMesh network, it will be listed in the Devices in
OneMesh Network list. Otherwise, you need to find it in the Available OneMesh Devices list and click Add to add it to the OneMesh network.

Now your router and extenders successfully form one OneMesh network!
Tips: It is recommended to enable Smart Connect feature on Wireless > Wireless Settings to enjoy a seamless connection between dual-band networks. With Smart Connect enabled, the router’s 2.4GHz and 5GHz share the same SSID (network name) and password.
· If the extender is not connected to this router 1. Connect one or more OneMesh extenders to this router by following the setup
instructions in the extenders’ manuals.
Note: To check full list of TP-Link OneMesh extenders or other devices, visit https://www.tp-link.com/onemesh/compatibility.
2. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router.
3. Go to Basic > OneMesh or Advanced > OneMesh to check the devices list.
Tips: It is recommended to enable Smart Connect feature on Wireless > Wireless Settings to enjoy a seamless connection between dual-band networks. With Smart Connect enabled, the router’s 2.4GHz and 5GHz share the same SSID (network name) and password.
82

Chapter 14

OneMesh with Seamless Roaming

13 2 Manage Devices in the OneMesh Network
In a OneMesh network, you can manage all mesh devices and clients on your router’s web page.
· To view all mesh devices and clients in the OneMesh network: 1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set
for the router. 2. Go to Basic > Network Map. 3. Click the Mesh Devices, Wired Clients, or Wireless Clients icon to view the related
device or client list.

4. Click Modify icon to customize the device`s name and location. 83

Chapter 14

OneMesh with Seamless Roaming

· To manage each OneMesh device in the network: 1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set
for the router. 2. Go to Basic > OneMesh or Advanced > OneMesh.

3. Click a OneMesh device to view the device information, or click Clients to view the clients connected to this device.
On the Device Info page, you can: · Click Manage Device to redirect to the web management page of this OneMesh device. · Click Leave OneMesh to delete this device from the OneMesh network.

84

FAQ
Q1 How do I restore my router to its factory default settings?
With the router powered on, press and hold the WPS/RESET button on the rear panel until the Power LED starts flashing.
Note: Once the router is reset, the current configuration settings will be lost and you will need to re-configure the router.
Q2 What should I do if I forget my password?
· Web Management page password: Restore the router to its factory default settings and then create a new password using 1-32 characters. · Wireless Network password: 1 The default Wireless Password/PIN is printed on the product label of the router. 2 If the default wireless password has been changed, log in to the router’s web
management page and go to Basic > Wireless to retrieve or reset your password.
Q3 What should I do if I cannot access the web management page?
This can happen for a variety of reasons. Please try the methods below to log in again. · Make sure your computer has connected to the router correctly and the corresponding
LED lights up. · Make sure the IP address of your computer is configured as Obtain an IP address
automatically and Obtain DNS server address automatically. · Make sure you enter the correct IP address to log in: http://tplinkmodem.net. · Check your computer’s settings:
1 ) Go to Start > Control Panel > Network and Internet, and click View network status and tasks.
2 ) Click Internet Options on the bottom left.
85

3 ) Click Connections and select Never dial a connection. 4 ) Click LAN settings, deselect the following three options and click OK;
86

5 ) Go to Advanced > Restore advanced settings, click OK to save the settings.
· Use another web browser or computer to log in again. · Reset the router to factory default settings and try again. If the login still fails, please
contact the technical support.
Note: You’ll need to reconfigure the router to surf the internet once the router is reset.
Q4 What can I do if I cannot access the internet?
1 Verify that your SIM card is an LTE or WCDMA card. 2 Verify that your SIM card is in your ISP’s service area. 3 Verify that your SIM card has sufficient credit. 4 Check the LAN connection:
Open a web browser and enter http://tplinkmodem.net or http://192.168.1.1 in the address bar. If the login page does not appear, refer to Q3 and then try again. 5 Check your ISP parameters: 1 ) Open a web browser and log in to the web management page.
87

2 ) Go to Advanced > Network > Internet to verify the parameters (including the APN, Username and Password) provided by your ISP are correctly entered. If the parameters are incorrect, click Create Profile and enter the correct parameters, then select the new profile from the Profile Name list.
6 Check the PIN settings: 1 ) Open a web browser and log in to the web management page. 2 ) Go to Advanced > Network > PIN Management to verify if PIN is required. If it is, enter the correct PIN provided by your ISP or disable PIN Lock, and click Save.
7 Check the Data Limit: 1 ) Open a web browser and log in to the web management page. 2 ) Go to Advanced > Network > Data Settings to verify if the Total Used exceeds the Total Allowance or if the Monthly Used exceeds the Monthly Allowance. If it does, click Correct and set Total/Monthly Used to 0 (zero), or disable Data Limit.
8 Check the Mobile Data: 1 ) Open a web browser and log in to the web management page. 2 ) Go to Advanced > Network > Internet to verify that Mobile Data is enabled. If not, toggle it On to access the internet.
9 Check the Data Roaming: 1 ) Confirm with your ISP if you are in a roaming service area. If you are, open a web browser and log in to the web management page. 2 ) Go to Advanced > Network > Internet to verify that Data Roaming is enabled. If not, toggle it On to access the internet.
Q5 What should I do if my internet speed is slow?
1 Make sure you are inside a network coverage area. 2 Relocate your router and your computer to have a better signal reception ­ you may
be in or near a structure that is blocking the signal. Obstacles (for example, walls, ceilings, and furniture) between the router and other wireless devices decreases the signal strength. 3 The 2.4GHz Wi-Fi network may be interfered. It is recommended to use the 5GHz Wi-Fi network if your devices support it. Visit http://tplinkmodem.net, and log in with the password you set for the router. Go to Basic > Wireless page and enable Wireless Network 5GHz. Then you can search the SSID of your 5GHz wireless network on your wireless devices and connect to it.
88

Q6 How to use the router as a regular wireless router to share my internet ?
The router support two operation modes, 3G/4G Router Mode and Wireless Router mode. If you already have a modem or your internet comes via an Ethernet cable from the wall, you can set up the router as a regular wireless router to share the internet. 1 Connect your router’s LAN4/WAN port to the modem or the network port. 2 Visit http://tplinkmodem.net, and log in with password you set for the router. 3 Go to Advanced > Operation Mode page.
4 Select the Wireless Router Mode option and click Save to make the settings effective.
Note: 1. In wireless router mode, you can use 3G/4G network as a backup solution for internet access. When 3G/4G Backup is
enabled, your router will be directly connected to the 3G/4G network when the original network service fails. To enable or disable 3G/4G Backup, go to Advanced > Network > Internet.
2. In wireless router mode, you can set up your router for an IPTV connection. To enable and configre IPTV, go to Advanced > IPTV.
89

Q7 What can I do if I cannot find my wireless network or I cannot connect the wireless network?
· If you fail to find any wireless network, please follow the steps below: 1 Make sure the wireless function is enabled if you’re using a laptop with built-in
wireless adapter. You can refer to the relevant document or contact the laptop manufacturer. 2 Make sure the wireless adapter driver is installed successfully and the wireless adapter is enabled. On Windows 7 1 ) If you see the message No connections are available, it is usually because the
wireless function is disabled or blocked somehow;
2 ) Clicking on Troubleshoot and windows might be able to fix the problem by itself. On Windows XP 1 ) If you see the message Windows cannot configure this wireless connection,
this is usually because windows configuration utility is disabled or you are running another wireless configuration tool to connect the wireless.
90

2 ) Exit the wireless configuration tool (the TP-Link Utility, for example); 3 ) Select and right click on My Computer on desktop, select Manage to open
Computer Management window; 4 ) Expand Services and Applications > Services, find and locate Wireless Zero
Configuration in the Services list on the right side;
5 ) Select Wireless Zero Configuration, right click it, and then select Properties;
91

6 ) Change Startup type to Automatic, click on Start button and make sure the Service status is Started. And then click OK.
7 ) Connect to wireless network. · If you can find other wireless network except your own, please follow the steps
below: 1 Check the Wi-Fi LED indicator on your router; 2 Make sure your computer/device is still in the range of your router/modem, move
closer if it is currently too far away; 3 Go to Advanced > Wireless > Advanced Settings page, and check the wireless
router settings. Double check your Wireless Network Name, and make sure the SSID is not hided; 4 Connect to wireless network. · If you can find your wireless network but fail to connect, please follow the steps below: 1 Authenticating problem, password mismatch. 1 ) Sometimes it will ask you to type in a PIN number when you connect to the
wireless network for the first time. This PIN number is different from the Wireless 92

Password/Network Security Key, usually you can only find it on the back of your wireless router/modem;
2 ) If you cannot find the PIN or PIN failed, you may choose Connecting using a security key instead, and then type in the Network Security Key/Wireless Password;
3 ) If it continues saying network security key mismatch, it is suggested to confirm the wireless password on your wireless router/modem;
Note: Wireless password/Network Security Key is case-sensitive.
93

4 ) Connect to wireless network. 2 Windows was unable to connect to XXXX /Cannot join this network/Taking longer
than usual to connect to this network. 1 ) Check the wireless signal strength of your network, if it is weak (1~3 bars),
please move the router closer and try again; 2 ) Change the wireless Channel of the router to 1,6,or 11 to reduce interference
from other networks; 3 ) Re-install or update the driver for your wireless adapter of the computer; 4 ) Connect to wireless network.
94

CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
OPERATING FREQUENCY(the maximum transmitted power)
2400MHz~2483.5MHz(20dBm) 5150MHz~5250MHz(23dBm) WCDMA Band 1/8(24dBm+1.7/-3.7dB) LTE Band 1/3/7/8/20/28/38/40/B41 (23dBm+2.7/-2.7dB)
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body.
National Restrictions
Attention: This device may only be used indoors in all EU member states, EFTA countries and Northern Ireland. Attention: This device may only be used indoors in Great Britain.
AT BE BG CH CY CZ DE DK EE EL ES FI FR HR HU IE IS IT LI LT LU LV MT NL NO PL PT RO SE SI SK UK(NI)
UK
95

UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www .tp-link.com/support/ukca/
Korea Warning Statements
.
NCC Notice

BSMI Notice
· · · ·
·
·

96

Equipment name AC1200 Wireless Dual Band 4G LTE Router

Archer MR400 Type designation (Type)

Unit

Lead (Pb)

Mercury
(Hg)

Restricted substances and its chemical symbols

Cadmium (Cd)

Hexavalent
chromium (Cr+6)

Polybrominated
biphenyls (PBB)

Polybrominated diphenyl ethers
(PBDE)

PCB

—

1. 0.1 wt % 0.01 wt % Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2: “” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3: The “-” indicates that the restricted substance corresponds to the exemption.

Equipment name AC750 Wireless Dual Band 4G LTE Router

Archer MR200 Type designation (Type)

Unit

Lead (Pb)

Mercury
(Hg)

Restricted substances and its chemical symbols

Cadmium (Cd)

Hexavalent
chromium (Cr+6)

Polybrominated
biphenyls (PBB)

Polybrominated diphenyl ethers
(PBDE)

PCB

—

1. 0.1 wt % 0.01 wt % Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2: “” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3: The “-” indicates that the restricted substance corresponds to the exemption.

97

, .
Safety Information
· Keep the device away from water, fire, humidity or hot environments. · Do not attempt to disassemble, repair, or modify the device. If you need service,
please contact us. · Do not use damaged charger or USB cable to charge the device. · Do not use any other chargers than those recommended. · Do not use the device where wireless devices are not allowed. · Adapter shall be installed near the equipment and shall be easily accessible. · Use only power supplies which are provided by manufacturer and in the original
packing of this product. If you have any questions, please don’t hesitate to contact us. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Environment:
Operating Temperature: 0~40 (32 ~104) Operating Humidity: 10%~90% non- condensing Storage Humidity: 5%~90% non-condensing
Explanation of the symbols on the product label
Symbol Explanation
Class II equipment
DC voltage
Indoor use only
Polarity of output terminals Caution Operator’s manual
98

Energy efficiency Marking RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
99

References

• Community Downloads - Open Source VPN | OpenVPN
• Trying to configure the Modem? | TP-Link
• Wikipedia
• TP-Link Community
• WiFi Networking Equipment for Home & Business | TP-Link
• CE Regulatory Compliance | TP-Link
• TP-Link OneMesh Devices
• TP-Link OneMesh Devices
• TP-Link Product Support - Wireless Networking Equipment Support
• Regulatory Compliance | TP-Link

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>