Conceptronic CTVDIGRCU USB Digital TV Receiver Quick Installation Guide

Conceptronic CTVDIGRCU USB Digital TV Receiver

Congratulations on the purchase of your Conceptronic DVB-T USB Adapter with Remote Control.

The enclosed Hardware Installation Guide gives you a step-by-step explanation of how to install the Conceptronic CTVDIGRCU.

When problems occur, we advise you to go to our support site (go to www.conceptronic.net and click ‘Support’. Here you will find the Frequently Asked Questions Database.

When you have other questions about your product and you cannot find it at our website, then contact us by e-mail: support@conceptronic.net

For more information about Conceptronic products, please visit the Conceptronic Web Site: www.conceptronic.net

The Software installation as described below, may be slightly different from the installation on your computer. This depends on the Windows version you are using.

Introduction

Package contents

Unpack your DVB-T USB Adapter package and be sure that all items are included. The following items should be included in the package:

• Conceptronic DVB-T USB Adapter
• Remote Control for Conceptronic DVB-T USB Adapter
• Antenna
• Antenna converter plug
• Suction Cup for Antenna
• This Quick Installation Guide
• Driver and application CD-ROM

Features

• Watch Digital TV on your notebook or desktop computer
• Capture still image & full motion video
• Record/ Play TV images

Note: Radio functionality is not supported by the CTVDIGRCU.

The availability of Free-To-Air Channels is depending on the provided content of your TV-Provider. Please contact your TV- Provider for the availability of Free-To-Air channels.

Minimum System Requirements

• Intel Pentium 4 2,0Ghz or higher Processor. (For Centrino Mobile platform: 1,7Ghz or higher Processor).
• 256Mb Internal Memory (512Mb Recommended).
• 250MB Free Disk Space (1000Mb Recommended with Time Shifting).
• AC97 Compatible Sound Card.
• Graphics Card (With support for DirectX 9.0b or higher).
• Windows XP with Service Pack 1 / Windows 2000 with Service Pack 4.
• Microsoft DirectX9 & Windows Media Player 9 or higher.

Driver & Software Installation Windows XP / Windows 2000

Note: You need to install the Drivers & Software first before you connect the CTVDIGRCU to your computer!

Insert the Product CD-ROM in your CD-ROM drive. The CTVDIGRCU Menu should appear automatically. If the Menu does not appear, use Windows Explorer to navigate to the CD-ROM and execute “Autorun.exe”.

Note: Make sure you have a recent version of DirectX installed on your computer. If you don’t have a recent version, use the option “Install DirectX” on the CD-ROM to install DirectX.

Driver Installation

1. Select the option “Install Drivers” in the Autorun Menu.
2. The driver will be installed on your computer. Wait for the completion of the installation and click “Finish” to close the installer.

Software Installation

1. Select the option “Install ArcSoft TotalMedia” in the Autorun Menu.
2. The Setup Wizard will be started. Select your Language and click “OK” to continue.
3. The TotalMedia welcome screen will be shown. Click “Next” to continue.
4. Click “Yes” to accept the License Agreement and continue the wizard.
5. Change the installation destination with the “Browse” button, or keep it default. Click “Next” to continue.
6. Change the Start Menu destination, or keep it default. Click “Next” to continue.
7. The software will be installed. Please wait for the completion of the installation and click “Finish” to close the Setup Wizard.
8. After the Driver & Software installation is finished, reboot your computer before you connect the CTVDIGRCU to your computer!

Connect the CTVDIGRCU to your computer

1. Turn on your computer.
2. Connect the antenna converter to the antenna.
3. Connect the antenna with the converter to the CTVDIGRCU.
4. Connect the CTVDIGRCU to a free USB port on your computer.
5. If needed, use the USB Extension cable between the CTVDIGRCU and your computer to extend the distance between the devices.
   The device will be recognized and installed automatically.

TotalMedia Control Explanation

Remote Control

Below you will find the explanation of the Remote Control features for TotalMedia:

Keyboard Shortcuts

TotalMedia can be controlled with the arrow keys on your keyboard. Next to the arrow keys, the following keys can be used as a shortcut for different TotalMedia commands:

• Arrow Keys: Navigate through TotalMedia.
• Enter: Activate selection.
• Backspace: Return to the previous screen.
• F1: Open TotalMedia Help.
• F2: Activate Time Shifting.
• F4: Switch Source.
• F5: Take a snapshot of the displayed TV Channel.
• F6: Switch Sound Channel (Only for Multichannel TV Sound).
• F8: Mute Sound.
• F9: Decrease Volume.
• F10: Increase Volume.
• F11: Switch between the 2 last channels.
• Ctrl + [+] (Plus): Channel Up.
• Ctrl + [-] (Minus): Channel Down.
• Ctrl + Alt + F12: Enter / Exit TotalMedia.
• Ctrl + T: Start Live TV.
• Ctrl + M: Start Music Mode.
• Ctrl + I: Start Picture Mode.
• Ctrl + A: Start Radio Mode (Not supported by CTVDIGRCU).
• Ctrl + E: Start Video Mode.
• Alt + Enter: Enter / Exit Fullscreen Mode.

These shortcuts provide quick and efficient ways to navigate and use various features within TotalMedia, enhancing the user experience.

Using TotalMedia

When the Drivers & Software are installed, and the CTVDIGRCU is connected to the computer, you can use TotalMedia to watch Digital TV.
You can start TotalMedia in various ways:

• A. Click on “Start”, “Programs”, ArcSoft TotalMedia”, and “TotalMedia”.
• B. Doubleclick on the TotalMedia shortcut on your desktop:
• C. Press the ON/OFF Button on the Remote Control.
• D. Press Ctrl + Alt + F12 on your keyboard.
• E. Doubleclick on the TotalMedia systemtray icon:

When the TotalMedia application is started, you will see the following screen:

1. Select the option “TV” to start using the CTVDIGRCU. If the application is started for the first time, there are no TV channels defined. When you select the option “TV”, TotalMedia will ask you to define your TV Channels: 

2. Select “Yes” to open the Channel Setup. You will see the following screen:

3. Check if the TV Signal is set to “DVB-T”

4. Select your Region.

5. Select “Start” to begin with the channel search. The Channel Scan takes a few minutes. Please wait until you see the following message: 
   The availability of Free-To-Air Channels depends on the content of your TV provider. Please contact your TV provider for the availability of Free-To-Air channels.

6. Select “OK” to continue with the TotalMedia application.

7. Select the option “Save” in the Channel List to save the found channels.

8. Select “Yes” to save the channels and return to the TV screen.

Note: For all other configuration options of TotalMedia, select the option “Setup” in the Main Menu.

Your CTVDIGRCU is now ready to use!

Declaration of CE Conformity

• Manufacturer: Conceptronic
• Address: Databankweg 7, 3821 AL Amersfoort, the Netherlands

Product Information:

• Type: DVB-T USB Adapter + Remote Control
• Product Model: CTVDIGRCU

Compliance with Directives:

• 89/336/EEC EMC Directive: Electromagnetic Compatibility
• 73/23/EEC Low Voltage Directive: Electrical equipment designed for use within certain voltage limits

Standards for Conformity Assessment:

• ETS 300 328-2/2000
• EN 301 489-17-2000
• EN 301 489-1-2000
• EN55022/9.98 Class B
• EN 61000-3-2/3/4/1995
• EN 50082-1/1994
• EN 60950/1995

Confirmation:

• The CE symbol confirms that this product conforms to the above-named standards and regulations.

Applicability:

• This product is suitable for all EU countries.

Certification Details:

• Place of Issue: Amersfoort
• Date of Issue: February 28, 2006
• Authorized Signatory: Herman Looijen, Product Marketing Manager

Frequently Aske Questions

What is included in the package of the Conceptronic CTVDIGRCU USB Digital TV Receiver?

The package includes the Conceptronic DVB-T USB Adapter, a remote control, an antenna with a converter plug and suction cup, a quick installation guide, and a driver and application CD-ROM.

What are the main features of the Conceptronic CTVDIGRCU?

Key features include watching digital TV on your notebook or desktop computer, capturing still images and full-motion video, and the ability to record/play TV images. Note that radio functionality is not supported by the CTVDIGRCU.

What are the minimum system requirements for the Conceptronic CTVDIGRCU?

The minimum requirements are an Intel Pentium 4 2.0Ghz processor or higher (1.7Ghz for Centrino Mobile), 256Mb internal memory (512Mb recommended), 250MB free disk space (1000Mb recommended with Time Shifting), AC97 compatible sound card, graphics card supporting DirectX 9.0b or higher, and Windows XP with Service Pack 1/Windows 2000 with Service Pack 4.

How do I install the drivers and software for the CTVDIGRCU on Windows XP/Windows 2000?

Insert the product CD-ROM in your CD-ROM drive and follow the on-screen instructions. Install the drivers first, followed by the ArcSoft TotalMedia software. Reboot your computer before connecting the CTVDIGRCU.

How do I connect the CTVDIGRCU to my computer?

Connect the antenna to the converter and then to the CTVDIGRCU. Connect the CTVDIGRCU to a free USB port on your computer. The device will be recognized and installed automatically.

What are the key shortcuts for TotalMedia control?

The key shortcuts include Arrow Keys for navigation, Enter to activate selection, Backspace to return to the previous screen, function keys (F1-F11) for various commands like muting sound, changing channels, etc., Ctrl with plus/minus for channel up/down, and Alt+Enter to enter/exit fullscreen mode.

How do I use TotalMedia with the CTVDIGRCU?

What should I do if I encounter problems with the CTVDIGRCU?

If you encounter problems, check the Frequently Asked Questions Database on Conceptronic's support site or contact them via email.

Does the CTVDIGRCU comply with EU directives and standards?

Yes, it complies with the 89/336/EEC EMC Directive and the 73/23/EEC Low Voltage Directive, among others, and meets several standards including EN55022/9.98 Class B and EN 60950/1995.

Who is the manufacturer of the CTVDIGRCU?

The manufacturer is Conceptronic, located at Databankweg 7, 3821 AL Amersfoort, the Netherlands.

Can I watch Free-To-Air channels with the CTVDIGRCU?

Yes, the availability of Free-To-Air Channels depends on the content provided by your TV provider. Please contact them to confirm the availability of these channels.

Is the CTVDIGRCU compatible with laptops and desktop computers?

Yes, the CTVDIGRCU is designed to work with both notebooks and desktop computers, provided they meet the minimum system requirements.

Reference:Conceptronic CTVDIGRCU USB Digital TV Receiver Quick Installation Guide- device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>