Kanartic OSK102 Nethome Plus Smart Kit User Manual
- June 15, 2024
- Kanartic
Table of Contents
Kanartic OSK102 Nethome Plus Smart Kit User Manual
IMPORTANT NOTE:
Read the manual carefully before installing or connecting your Smart kit
(Wireless module).
Make sure to save this manual for future reference.
**NOTE***
Company will not be liable for any issues and problems caused by Internet, Wi-
Fi Router and Smart Devices. Please contact the original provider to get
further help.
DECLARATION OF CONFORMITY
Hereby, we declare that this Smart kit is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
SPECIFICATION
Model: OSK102
Standard: IEEE 802. 11b/g/n
Antenna Type: Printed PCB Antenna Frequency
: WLAN 2400~2483.5 MHz Operation
Temperature : 0 C~45 C/32 F~113 F Operation
Humidity: 10%~85%
Power Input: DC 5V/300mA
Maximum Transmitted Power: 19.8dBm Max
PRECAUTIONS
Applicable system: iOS, Android.
( Suggest: iOS 8.0 or later, Android 4.0 or later) Please keep the APP up
to date with the latest version.
Due to special situations may be occurred, we explicitly claims below: Not all
of the Android and i OS system are compatible with APP.
Wireless safety strategy
Smart kit only support WPA-PSK/WPA2-PSK encryption and none encryption .
WPA-PSK/WPA2-PSK encryption is recommended.
Cautions
If system time-out occurs, restart the configuration process. Smart Phone
camera needs to be 5 million pixels or above to make sure scan QR code well –
Due to different network situation, sometimes, request time-out could happen,
thus, it is necessary to do network configuration again. – The APP system is
subject to update without prior notice for product function improvement. The
actual network configuration process may be slightly different from the
manual, the actual process shall prevail.
DOWNLOAD AND INSTALL APP
CAUTION: The following QR Code is only available for downloading APP. It is totally different with the QR code packed with SMART KIT.
iOS
- Android Phone users: scan Android QR code or go to google play, search ‘Net Home Plus” app and download it.
- iOS users: scan iOS QR code or go to APP Store, search ‘Net Home Plus” app and download it.
INSTALL THE SMART KIT (wireless module)
-
Remove the protective cap of the smart kit (wireless module)
-
Open the front panel and insert the smart kit (wireless module) into the reserved interface.
-
Apply the Smart Kit QR sticker from inside the box to the side of the AC unit, or in a location that can be scanned by a smart device.
NOTE: Ensure the number on the QR code sticker matches the number on the
Smart Kit installed in the unit.
WARNING: This Wi-Fi interface is compatible only with the Smart Kit
provided by the manufacturer.
USER REGISTRATION
- Please ensure your mobile device is connected to Wireless router. Also, the Wireless router has already connected to Internet before doing user registration and network configuration.
- It is better to log in your email box and activate your registration account by clicking link. This will save login details in case you forget the password.
-
Click “Create Account”
-
Enter your email : address and password, confirm password and then click “Register”
NETWORK CONFIGURATION
Cautions
- It is necessary to forget any other around network and make sure the Android or iOS device just connects to the Wireless network you want to configure.
- Make sure the Android or iOS device Wireless function works well and can be connected back to your original Wireless network automatically.
Kindly reminder:
When AC enters into ‘AP ‘ mode, the air-conditioning remote controller can’t
control it. It is necessary to finish network configuration or power the AC
again in order to control it. Alternatively, you need to wait 8 minutes to let
the AC quit ‘AP ‘ mode automatically.
Using Android device to do network configuration
-
Make sure your mobile device has already been connected to the Wireless network which you want to use. Also, you need to forget other irrelevant Wireless network in case it influences your configuration process.
-
Power on the AC, then continuously press the “LED DISPLAY” button button on the remote seven times in 10 seconds.
-
When the AC displays “AP”, it means that the AC Wireless has already entered into “AP” Mode.
-
Press”+Add Device”
-
Select the appliance you are setting up
-
Follow the above steps to enter “AP” mode ”
-
Choose the network configuration method
-
Choose the * Scan the QR code ” method.
-
Or choose the ‘Manual Setup” method.
-
Please enter password
-
Network configuration is successful
-
Configuration Success, you can see the device on the list.
Using iOS device to do network configuration
-
Make sure your mobile device has already been connected to the Wireless network which you want to use. Also, you need to forget other irrelevant Wireless network in case it influences your configuration process.
-
. Power on the AC, then continuously press the “LED DISPLAY” button buitton on the remote seven times in 70 seconds.
-
When the AC displays “AP” , it means that the AC Wireless has already entered into “AP” Mode.
-
.Press”+Add Device”
-
Select the appliance ou are setting up
-
Follow the above steps to enter “AP” mode ”
-
Connect to the wireless network
-
Please enter password
-
Network configuration is successful.
-
Configuration Success, you can see the device on the list.
- NOTE:
- When finishing network configuration, APP will display success cue words on the screen
- Due to different internet environment, it is possible that the device status still display “offine” . f this situation occurs, it is necessary to pull and refresh the device st on the APP and make sure the device status become “online” . Alteratively, user can tum off the AC power and tum on it again, the device status will become “online’ after few minutes.
HOW TO USE APP
Please ensure both your mobile device and air conditioner are connected to the
Internet before using app to control the air conditioner via interet, please
follow the next steps:
-
Click “Sign up”
-
Choose the air conditioner
-
Thus, user can control air conditioners onoff status, operation mode, temperature, fan speed and other common functions.
NOTE: Not all the functions of the APP is available on air conditioner. For example: ECO, Turbo, Swing function, please check the user manual to find more information.
SPECIAL FUNCTIONS
Including: Timer on, Timer off, 8°C Heat, Sleep, Check
NOTE: If the air condiioner do not support the above function, the
function will be hided from the function list
Timer on/Timer off
Weekly user can make an appointment to turn on or off AC on specific ime. User
also can choosecirculation to keep. the AC under schedule control every week.
Sleep
User can customize their own comfortable sleep by setting target
temperature.
Check
User can simply check the AC running status with this function. When finishing
this procedure, it can display the normal items, abnormal items, and detail
information.
Share Device
The air condifioner can be controlled by multi-users at the same time by Share
Device function.
-
Click “Share QR code”
-
QR code display
-
The other user must login ” Netphone Plus ” app first, then click “Add Share Device” on their own mobile.
-
Scan the QR code. Now the others can add the shared device.
CAUTIONS:
- This device complies with Part 15 of the FCC Rules and RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Only operate the device in accordance with the instructions supplied. This device complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC and IC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.