TONEMAC 2BDAC-H2 H2 Wireless Headphones User Manual
- June 15, 2024
- TONEMAC
Table of Contents
USER MANUAL
Welcome!
TONEMAC offers 12 months of global manufacturer’s warranty and 90 days refund
policy to make sure that every customer can buy without worry.
If you have any questions about our products or services, please feel free to
contact us via the following email:
Supports@tangmai.com.cn
(Please send in your buying details which included shop name, order ID, your
address, etc.)
© 2023 TONEMAC Tech. Co., Ltd. No part of this work may be reproduced,
modified, distributed or otherwise used without prior written permission.
WARNING FOR HEADPHONES
For safe and correct use of earphones, read this manual before use. Keep the
manual and safety information in a convenient place for future reference.
IMPORTANT SAFETY PRECAUTIONS
Before using this product, please read and save the enclosed warnings and
safety instructions.
The possible results of incorrect use are marked by one of the two
symbols—”WARNING” and “CAUTION”—depending on the imminence of the danger and
the severity of the damage.
- WARNING -Ignoring these warnings may cause severe injury or death as a result of an incorrect operation
- CAUTION -Ignoring these cautions may cause moderate injury or property damage as a result of incorrect operation.
WARNING
Listening to audio at excessive volumes can cause permanent hearing damage,
Overexposure to excessive sound levels can damage your ears resulting in
permanent noise-induced hearing loss (NIHL). Please use the following
guidelines established by the Occupational Safety Health Administration (OSHA)
on maximum time exposure to sound pressure levels before hearing damage
occurs.
| 90 dB SPL | at 8 hours | 95 dB SPL | at 4 hours |
|---|---|---|---|
| 100 dB SPL | at 2 hours | 105 dB SPL | at 1 hours |
| 110 dB SPL | at 30 min | 115 dB SPL | at 15 min |
| 120 dB SPL | Avoid or damage may occur |
-
Focus on your safety and that of others if you use the headphones while engaging in any activity requiring your attention, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad, etc. Remove the headphones or adjust your volume to ensure you can hear surrounding sounds, including alarms and warning signals.
-
Use caution and follow applicable laws regarding mobile phone and headphone use if using headphones for phone calls while driving. Some jurisdictions impose specific limitations on using such products while driving.
DON’T use the headphones for any other purpose while driving. -
Keep this product and its accessories out of reach of children under age 3.
Handling or using by children may pose a risk of death or serious injury.
Contains small parts and cords that may pose the risk of choking or strangulation. -
Do not place any naked flame sources on or near the headphones, such as lighted candles.
CAUTION
-
Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
-
Do not drop, sit on or allow the headphones to be immersed in water, otherwise, the headphone’s failures may result.
-
Do not be subject to extreme force and do not pull on the cable or failures may result.
-
Keep dry and avoid exposure to extreme temperatures and humidity.
Stop using the earphones immediately if they are causing great discomfort, irritation, rash, discharge, or any other uncomfortable reaction. -
If you are currently receiving ear treatment, consult your physician before u sing this device.
INTRODUCING TONEMAC H2
① Power Button
② Volume + Button
③ Volume – Button
④ Indicator Light
⑤ USB-C Charging Port
⑥ 3.5mm AUX Port
POWER ON/OFF
Press and hold the power button for 3 seconds to power on/off.
| Steady green for 2 second | Power on |
|---|---|
| Steady red for 2 second | Power off |
BLUETOOTH PAIRING
- When powered off, press and hold the power button for 5 seconds until the LED flashes green and red to enter the Bluetooth pairing mode.
- Select “TONEMAC H2” on your device’s Bluetooth list to connect.
- Each time you power on your headphone, it will automatically connect to your last successfully connected device if available within the Bluetooth range.
| Flash green and red | Pairing |
|---|---|
| Light off | Connected |
CHARGING
| Flash red | Low battery |
|---|---|
| Steady red | Charing |
| Steady green | Fully Charged |
- Fully dry off the USB port before charging.
- Use the included USB-C charging cable to charge the headphone and make sure it is fully charged before first use.
CONTROLS
Playback Actions|
---|---
Play / Pause:| Click the power button once
Previous track:| Press the “-” button 2 seconds
Next track:| Press the “+” button 2 seconds
Volume Up / Down| Click the “+” / “-” button
Phone Call Actions|
Answer a call:| Click the power button twice
End a call:| Click the power button twice
Decline a call:| Press the power button 2 seconds
Put the current call on hold and answer a new incoming call| Click the power
button once
Switch between held call and active call| Click the power button once
SPECIFICATIONS
| Model | TONEMAC H2 |
|---|---|
| Bluetooth Version | 5.3 |
| Bluetooth Profile | HFP / A2DP / AVRCP |
| Audio Codec Format | SBC / AAC |
| Bluetooth Range | 10 m (33 ft) |
| Battery Capacity | 500 mAh |
| Playing Time | Up to 50 hours |
| Charging Time | 1.5 hours |
| Driver Size | Φ40 mm x2 |
| Frequency response | 20 Hz – 20 kHz |
| Impedance | 32Ω±15% |
| Input | 5V ****1A |
LIMITED WARRANTY
TONEMAC Technology Co., Ltd (“TONEMAC”) warrants this product against defects
in material or workmanship for the periods and as set forth below when
purchased directly from TONEMAC or TONEMAC Retailer. Under this Limited
Warranty, TONEMAC will, at its option, (i) repair the product using new or
refurbished parts or (ii) replace the product with a new or refurbished
product. For purposes of this Limited Warranty, “refurbished” means a product
or part that has been returned to its original specifications. In the event of
a defect, these are your exclusive remedies. For 1 year from the original date
of purchase of the product (“Labor Warranty”), TONEMAC will, at its option,
repair or replace with a new or refurbished product, the product determined to
be defective.
This warranty is not transferable. This warranty does not apply in cases of
abuse or misuse of the product, use contrary to TONEMAC’s instruction,
ordinary wear, and tear, an act of God, negligent use, purchase from a party
other than TONEMAC or a TONEMAC-authorized reseller, unauthorized repair, or
modification of the product.
ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ARE HEREBY DISCLAIMED TO THE EXTENT PERMITTED UNDER APPLICABLE LAWS AND, TO
THE EXTENT NOT PERMITTED, ARE HEREBY LIMITED TO THE DURATION AND TERMS OF THIS
WARRANTY. TONEMAC ALSO HEREBY DISCLAIMS ALL LIABILITY FOR INCIDENTAL, SPECIAL,
OR CONSEQUENTIAL DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or
the exclusion or limitation of incidental or consequential damages, so the
above limitation may not apply to you. This warranty gives you specific legal
rights, and you may have other rights which vary from state to state.
This warranty does not restrict the rights of the consumer mandated under
applicable laws.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
**** TONEMAC hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
TONEMAC Tech. Co., Ltd.
@Tangmai Audio
@tangmai.audio
**** @Tangmai Audio
www.tonemac.com
Printed in China
@2023 TONEMAC Tech. Co., Ltd
No part of this work may be reproduced, modified, distributed, or otherwise
used without prior written permission.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>