Zettaguard Z-V5012-V2 HDMI Switch 5 Ports with Remote User Manual

Zettaguard Z-V5012-V2 HDMI Switch 5 Ports with Remote

Thank you!

Dear customer:

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

Our series of HDMI converters. switchers, extenders. matrixes and splitters are designed to make your AN device use more convenient, more comfortable, mora productive and more cost-efficient.

The 5×1 HOMI Switcher allows access to multiple HIJMI sources, using a single HDMI sink. The switch supports two HIJMI port operates in dual mode.
5 H DMI inputs and one HDMI output port. In MHL mode, the switch supports resolutions up to 720p@ B□Hz. 108DP@ 30Hz or at PackedPixel mode 1 DBDp@ 60Hz. In HDM I mode, the switch supports resolutions up to 4Kx2K 24/25/JOHz. The switch also supports EDID RAM. The Switcher allows 5 HDMI devices 1o be switched easily through one H □ MI compatible monitor or projector.The Switcher can also be placed at the end of a long H □ MI cable to regenerate the HDMI signal.

Our devices offer solutions for noise, space and security concerns, data center control,information distribution, conference room presentation, school and corporate training environments.

Packaging content:

1. HDMI 5•1 Unit x1
2. Remote controller x1
3. User Manual x1
4. DC 5V Power Adapter x1
5. MHL to HDMI Cable x1

Specifications

HDMI version…………………………………………………………….HDMI 2.0,HDCP 2.2
HDMI resolution…….24/50/60fps/480i/480p/576i/576p/720p/1080i/1080p/2160
Supports video color format……………………………….24bit/deep color 30bit,36bit
Vertical Frequency Range……………………………………………………4Kx2K@60Hz
Supports audio format………………………………DTS-HD/Dolby-trueHD/LPCM7.1
DTS/Dolby-AC3/DSD HD(HBR)
Max bandwidth………………………………………………………………………….600MHz
Max baud rate………………………………………………………………………….18.0Gbps
1080P input cable distance……………………..15m AWG24 HDMI standard cable
1080P Output cable distance…………………….20 AWG24 HDMI stamdard cable
4Kx2K lnput cable distance……………………….5m AWG24 HDMI standard cable
4Kx2K Output cable distance…………………….8m AWG24 HDMI standard cable
Max working current…………………………………………………………………….125mA
Power adapter format ;nput……………..AC1V-240V(50/60Hz);Output:DC 5V/1A
Operating Temperature range…………………………………………..(-40°C to +85°C)
Operating Humidity range…………………………….5 to 90%RH(No Condensation)
Dimension(LxWxH)………………………………………………………….138x65x22(mm)
Weight……………………………………………………………………………………………162g

Product Diagram:

1. SWITCH Button
2. Power LED
3. IR
4. MHL/HDMI IN PUT 1~5 LED
5. HDMI OUTPUT LED
6. HDMI OUT
7. DC 5V Power in put
8. MHL/HDMI IN PUT 1~5 Ports

IR Remote Operating Instruction

1. Firstly take off the plastic film in the rear of the remote board.
2.  If you want to select any of the 5 signal sources to the output, press the 1, 2, 3,4or 5 key .Like if you want to switch the 2 input signal to the output, press the 2 key directly.
3. The plastic film is strongly advised to put i1 in the rear of the remote board when the remote is not used for long time.

Connection Diagram:

Safety Precautions:

Do not set this product adjacent to a water source or an environment tha1 has excessive moisture.

• Do not operate the product when hands are wet.
• Place this product on a flat surface and keep it out of reach of children.
• Please turn the power off when it is not in use for an extended period of time.
• Do not attempt 1o dismantle the product on your own.
• Please use the power adapter provided.

Troubleshooting guide:

Before power on, please check the connection line carefully. And make sure that all interfaces are correctly connected.

The common trouble shooting way shows below:

1. Make sure that the TV is on and has been connected with the switcher.
2. Check if the signal source is on and well connected.
3. Check the system connection quality.
4. Check the cable quality

2| Obscure Picture|

1. Try again to connect 1he cable to be free from the unsuccessful connection.
2. Check HDMI Cable Quality

3| Remote not working|

1. Check if the film in rear cf the remote control is taken out
2. Check if the battery in remote is full.

Recycling the Product:
Tc dispose this product properly, please follow the recycling process regulations in your area.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>