Never Over Range Finder Golfing with Vibe User Manual

Never Over Range Finder Golfing with Vibe

Specification

Battery replacement

1. Remove the battery cap by lifting the tab and then rotating it counterclockwise to open;
2. Insert the CR-2 3-volt lithium battery into the compartment, negative end first;
3. Reinsert the battery cap by rotating clockwise to tighten it.

Low Battery Warning

When battery voltage is lower than working voltage, battery indicator flashes to remind user to replace battery.

Magnet feature

Stick the rangefinder to club cart metal pole. The contact surface needs to be big to stick it tight.

How to use

1. Power On
   Press the button for about 1 second to power on. The device will be powered off automatically after 30 seconds no operation. The default mode is “Pin lock” when powering the rangefinder for the first time.

2. Ranging Unit Meter or Yard
   Press and hold the button for 3 seconds to change ranging unit of Yard or Meter(Yd or M). You will see a Yd in the bottom right-hand comer for Yards and a M for Meters.
   

3. Diopter Adjustment
   Adjust the focus of the rangefinder by rotating the dial left or right gently until the image is as clear as the display.

4. Slope ON/OFF Setting
   Slide the Slope ON/OFF switch to tum the slope function ON or OFF.

5. “Pin Lock” ~ Mode:
   After device is powered on, aim golf flag by the ranging reticle/center, then hold the rangefinder steadily and press power button to measure the distance. The device will vibrate and the red ring will display after distance is measured.
   
   Note:
   When there are overlapping objects behind golf flag, press and hold the ranging button to scan the flag and objects behind.
   The closest distance will be locked at last.

6. Slope Mode:
   Slide SLOPE switch to tum the Slope mode ON.
   To use it in tournament, simply slide the SLOPE function OFF. Slope function is suitable for downhill and uphill situation.
   After the device is powered on, aim golf flag with the ranging reticle/center, hold the device steadily and press the power button. Both the line of sight distance and slope & slope adjusted distance will be display.
   
   When uphill, it will take a longer shot.
   When downhill, it will take a shorter shot.

7. Troubleshooting:
   When there is no reading on the internal LCD screen

8. Make sure battery is good and inserted correctly;

9. Make sure nothing is blocking the rangefinder lens. Fingers or side of the palm will interfere with the laser and result in inaccurate measurements as well;

10. When using the rangefinder, please hold the product steadily and aim target properly.

11. Warning

12. No direct view of sun or any sort of strong light source. It can bum your eyes;

13. Stay away from flammable things;

14. Do not look at the lens directly when ranging;

15. Do not soak the rangefinder into water;

16. Do not dismantle the device by yourself.

Thank you and enjoy our rangefinder.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>