Pildegro PTH-10D 3 in 1 Portable Carbon Monoxide Detector User Manual

Pildegro PTH-10D 3 in 1 Portable Carbon Monoxide Detector

Specifications

• Product Name: EN Air Detector

• Model: PTH-10D

• CO Measurement Function: Reference only

• CO Sound Alarm Range: Reference only

• Device Type: Non-household level alarm

• Not a security product

• Carbon Monoxide: 0~500 ppm (± 10%)

• CO Sound Alarm Range: default, 50 ppm

• Temperature: -10℃ ~ 50℃ (± 1.5°C) / 14°F ~ 122°F (± 2.7°F)
  Humidity: 0% ~ 95% RH (±5%)

• Battery: Built-in polymer lithium-ion battery (3.7V, 1000mAh)

• Input: Type-C，DC 5V ~ DC 24V (Max), support the fast charging protocol with a power of 10 ~ 65W

• Fast charging protocol: QC2.0, PD3.0, AFC, USB C UFP (BC1.2 DCP CDP SDP) and other common fast charging protocols (1C) charging

• Executive Standard: JJG915-2008

• Storage Temperature: -20℃ ~ 60℃ / -4°F ~ 140°F

• Product Size : 76mm × 70mm × 30mm (2.99 in × 2.75 in × 1.18 in)

• Packing List: PTH-10D × 1；Type-C Cable × 1；Outdoor Special Rope Buckle × 1；Users Manual × 1

Warning

• This device belongs to a non household level alarm and is not a security product.
• The CO measurement function and CO Sound Alarm Range provided by it are for reference only and cannot be used as the only standard. In the course of daily use, we should pay attention to safety and maintain good ventilation at all times to avoid danger!

Product Introduction

The EN Air Detector (model PTH-10D) is a non-household level alarm device designed to measure and provide reference data for CO concentration. It features a screen display, button hole for rope buckle, CO concentration measurement, temperature and humidity sensors, buzzer alert, battery capacity indicator, and a function button for various operations. The device also includes light indication alerts for different CO concentration levels.

Screen Display
The screen displays the following information

• CO Concentration
• Temperature
• Humidity
• Battery Capacity

Screen display and button

Light Indication Alert

The device has three color areas on the screen to indicate the CO concentration level

• Green Area: Flashes when CO concentration is 0 ~ 49 ppm, indicating a low level.
• Yellow Area: Flashes when CO concentration is 50 ~ 99 ppm, indicating a warning level with alarm sound.
• Red Area: Flashes when CO concentration is more than 100 ppm, indicating a dangerous level with alarm sound.

Buzzer Alert
The device emits an audible alarm sound when the CO concentration exceeds the set alarm value.

Operation **

**

To operate the EN Air Detector, use the function button located on the device.

Press function button

Long press function button

Power On/Off
To power on the device, long press the function button. To power off, long press the function button again.

Wake Up from Power-Saving Mode
If there is no keystroke operation within 5 minutes, the device automatically enters power-saving mode. Press the function button to wake it up.

Customize Sound Alarm Value **

**

To customize the sound alarm value

1. Double-click the function button to enter the setting mode.
2. Set the single digit by pressing the function button to adjust the value.
3. Long press the function button to confirm and exit.
4. During an audible alarm, press the function button to pause it for 15 seconds. If the CO concentration is still above the standard after 15 seconds, the buzzer will sound again until the level is lower than the alarm value.
5. Set the ten and hundred figures by pressing the function button to adjust the value.
6. During the setting process, if there is no keystroke operation within 15 seconds, the device automatically confirms the current setting operation and exits.

• During the setting process, there is no keystroke operation within 15 seconds, and the device automatically confirms the current setting operation and exits.
• For your safety, the range that can be set is: 25-125(Please refer to page 07 for the settings of the two modes)
• When the device sounds an audible alarm, you can press the function button to pause it for 15 seconds. After 15 seconds, if the ambient carbon monoxide concentration still exceeds the standard, the buzzer will sound again until the carbon monoxide level is lower than the alarm value.

• When you use this device in outdoor scenes (such as camping, car, etc.), for safety reasons, it is recommended that you set the alarm value between 25 and 75 ppm.

Warning
When the device sounds an audible alarm, please open the window for ventilation as soon as possible, find the source at the same time, and cut it off.

Recommended Alarm Value for Outdoor Scenes
When using the device in outdoor scenes (such as camping or in a car), it is recommended to set the alarm value between 25 and 75 ppm for safety reasons.

Warning
When the device sounds an audible alarm, please open the window for ventilation as soon as possible, and locate and cut off the source of CO.

Outdoor and Indoor Sound Alarm Modes

The EN Air Detector offers two sound alarm modes based on the location

Outdoor Sound Alarm Mode

• Custom sound alarm value is set between 25 and 75 ppm.
• This mode is suitable for outdoor scenes (camping, car, etc.)
• Low-frequency alarm sound of beep–, beep–, beep– is emitted when the CO concentration exceeds the custom alarm value.
• The concentration of carbon monoxide continues to rise, and when it exceeds 100 ppm, the audible alarm emits a high-frequency alarm sound of “beep, beep, beep…”
• This mode is suitable for outdoor scenes such as camping or in a car.

Indoor Sound Alarm Mode

• Custom sound alarm value is set between 75 and 125 ppm.
• This mode is suitable for indoor scenes (kitchen, bedroom, etc.)
• Low-frequency alarm sound of beep–, beep–, beep– is emitted when the CO concentration exceeds the custom alarm value.
• The concentration of carbon monoxide continues to rise, and when it exceeds 150 ppm, the audible alarm emits a high-frequency alarm sound of “beep, beep, beep…”
• This mode is suitable for indoor scenes such as kitchen or bedroom.

Note

• Do not expose this product to water and dust, nor place it in a high temperature environment exceeding 60°C, and keep it away from fire.
• When measuring in the car, please do not place the device directly in the sun for a long time.
• The device is a precision measuring instrument, and it is not allowed to disassemble it without authorization.
• Please charge the device with a charging plug that meets the specifications, otherwise the internal parts may be damaged.
• The charging cable and charging plug must support the relevant fast charging protocol at the same time in order to realize fast charging.
• When charging, due to the heating of the charging circuit and the battery, the temperature and humidity value may be 3°C ~ 5°C higher than the normal value. To obtain an accurate temperature and humidity measurement value, please read it after the device cools down to room temperature.
• If you want to stay out of use for a long time, please charge the device first, then turn it off and put it away.

Frequently Asked Questions (FAQ)

1. Q: Is the CO measurement function accurate?
   A: The CO measurement function provided by the device is for reference only and cannot be used as the only standard. It is recommended to ensure safety and maintain good ventilation at all times.

2. Q: What is the range of the customizable alarm values?
   A: The range that can be set for the alarm values is 25-125 ppm.

Refer to page 07 of the user manual for more information about the settings of the two modes.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>