WET FORGET Shower Refill Application Tips Instructions
- June 14, 2024
- Wet & Forget
Table of Contents
WET FORGET Shower Refill Application Tips
USING INSTRUCTIONS
HOW TO APPLY REFILL
You will need a sprayer to apply Wet & Forget Shower Refill. Add the contents of the refill to an empty Wet & Forget Shower 64 oz. bottle.
WEEKLY APPLICATION
After showering, spray Wet & Forget Shower on all surfaces to be cleaned. Surfaces can be wet or dry. The next day, thoroughly rinse all treated surfaces. For best results leave on surface 8-12 hours (but no more than 24 hours). Rinse shower base or tub thoroughly before re-entering. Alway use care when entering the shower after each use as it may be slippery if not properly rinsed.
TOUGH TO REACH AREAS
Wet & Forget Shower is equipped with a trigger sprayer that allows you to pivot the trigger into any position to get to those tough-to-reach areas. Go ahead turn the sprayer upsidedown- you’ll get the same product flow that you’d get in the upright position. It also sprays up to 10 feet allowing you to clean those not so easy-to-reach areas.
STARTING WITH A DIRT Y SHOWER
If you’re starting with an extremely dirty shower, no problem! Simply apply Wet & Forget Shower after the last shower of the day and let it sit for 8 to 12 hours. Rinse the shower thoroughly and, if necessary, give it a quick wipe- down. If there are still signs of shower grime, repeat the same routine daily until clean. No scrubbing required! Once you achieve a clean shower, you’ll only need to apply Wet Forget Shower one time per week to maintain a clean, fresh shower.
MOLD AND MILDEW STAINS
Wet & Forget Shower is only able to remove mold and mildew stains from the hard, non-porous areas of your shower. When rinsing, a wipe down may be necessary. Wet & Forget Shower will not remove mold and mildew stains from caulk and grout.
HARD WATER STAINS
Hard water stains are more noticeable when your shower is dry. Wet & Forget Shower may not be able to remove hard water or calcium deposits (water spotting) in some cases. Once cleaned, dark tiles may highlight calcium deposits. Clean hard water stains prior to or after using Wet & Forget Shower.
OUTSIDE OF THE SHOWER
- Wet & Forget Shower can be used to remove surface grime on areas outside of the shower including toilets, counters, and sinks. Be sure to rinse sinks, counters, and toilets immediately after application with water.
WHERE TO USE
- We always recommend testing in a small, inconspicuous area prior to using the product.
- Wet & Forget Shower can be used on all shower and tub surfaces, except natural marble.
POPULAR SHOWER & TUB MATERIALS/SURFACES
- Acrylic, Porcelain, Fiberglass, Granite, Slate, Glass Tiles, Natural Stone.
- Sinks, Counters, Toilets*-Acrylic, Porcelain, Granite.
- Enclosures- Showers, Shower Glass.
- Fixtures- Brass, Chrome, Bronze, Stainless, Nickel. Shower
- Curtains- Vinyl, Rubber, Nylon, Plastic, Fabric.
- Tiles- Ceramic, Porcelain, Mosaic, Slate, Granite.
Wet & Forget Shower can be used in your washing machine to remove soap scum build-up. Spray Wet & Forget Shower on the walls of your washing machine and inside the agitator if applicable. Leave overnight, and then run a short wash cycle to rinse the product off. Repeat if necessary up to 3 times.
Requires rinsing immediately after application. Wet & Forget Shower is not recommended for use on natural marble. Test in an inconspicuous area if you have dark tiles and hard water to avoid highlighting calcium deposits.
LIFE’S DIRTY. CLEAN EASY.