HOUSNAT PH-023B Professional Countertop Blenders Instruction Manual

INSTRUCTION MANUAL
MODEL: PH-023B

Please read these instructions carefully and retain for future reference.

SAFETY WARNING

Keep this manual for future reference

• DO NOT put the motor base in water or any other liquid due to the risk of electrical shock.
• Appliance is not intended for use by persons with any reduced physical, sensory of mental capabilities (including children). Ensure close adult supervision necessary when appliance is used by or near children.
• Never touch or make contact with moving parts, especially the blades, as it may cause serious injuries.
• Unplug power cord from outlet when appliance is not in use, before disassembling, when cleaning or changing parts.
• DO NOT operate appliance with a damaged cord or plug, if the unit malfunctions, or has been damaged in any manner.
• The machine must be plugged in a power supply that matches the appliance’s power requirements. Please consult a qualified electrician for proper electrical needs.
• DO NOT use attachments not recommended for this product, by doing s0, all warranty will be voided. Alterations or modifications is not com- mended and may result in bodily injury.
• DO NOT use outdoors.
• DO NOT place machine on or near a hot gas or electrical burner, heated oven, or allow machine to touch hot surfaces. Any external heat source can damage the machine.
• Keep hands and utensils out of the blender when motor is running to prevent severe personal injury or damage to the appliance.
• Handle Blades with care. As blades are very sharp, never try to remove the blades while the container is no the motor base.
• DO N O T operate with loose or damaged blades – replace immediately.
• The blender needs to rest for 1 minute after continuous working for 3 minutes.
• NEVER place blade assembly on motor base without blender container properly attached.
• The maximum capacity is equivalent to the liters on the container and is less with thicker mixtures.
• When making nut butter or oil-based food, DO NOT blend for more than one minute after mixture starts circulation. This could lead to dangerous overheating.
• WARNING: Hot liquid
• D O NOT start processing hot liquid at a high speed. Always process at a low speed and progress at high speed as the machine is running
• Use caution with hot liquid, liquid may spray from under the lid. Steam and liquid may cause injuries.
• WARNING: Appliance should not be cleaned with a water jet.
• About Thermal Protection
• The built-in thermal protector keeps track of the motor temperature and will warn the user of a heating malfunction. The protector will eventually shut the motor down. A display will instruct the user to remove the container from the motor until sufficiently cooled. This process takes approximately 2 minutes.
• If your recipe is causing a repeated heating problem, the ingredients may be too thick or too many contents in the machine. Consider adding more liquid or other means

INTRODUCTION

Congratulations on the purchase of your Kitchen Chef Mix Master!
Your new Commercial grade blender will allow you to process your drinks and ingredients quicker than ever before.
The heavy-duty power motor allows blades to spin at 23,000 —25,000 rpm, allowing you to blend anything from fruits and vegetables to coffee beans, ice and more. You can make the tastiest smoothies and juices in seconds without chucks. HOUSNAT blender’s powerful motor means almost every ingredient can be blended to a smooth texture.
We hope you enjoy your new Commercial Blender, should you have any questions please refer to our after-sales service

PRODUCT CHARACTERISTICS

Mix Master Blender
Heavy duty power motor
23,000 – 25,000 RPM
Over-current load protection
Thermal protection

SPECIFICATIONS

PRODUCT DIAGRAM PH-023B

•  Helps with thick mixtures that stop circulating. The mixing rod removes the air bubbles that can cause this problem.
• The splash guard prevents the accelerator tool from hitting the blades.
• DO NOT force the mixing rod in the container. Excessive force may cause damage to the blades.

WARNINGS

• Never use a blade assembly with loose, damaged or nicked components.
• Do not remove blades unless absolutely necessary. Blades do not need to be removed for normal cleaning

STEP TO OPEN THE JAR LID

Step 1. Before opening the jar cover, please remember to lift the spout lid at first.
Step 2. Fit the spout lid on the top.

Step 3. You can pour out the liquid directly.
Step 4. If you want to open the big jar lid, please hold the jar lid as above picture.

Step 5. Turn in clockwise direction.
Step 6. Gently push it up.

CONTROL PANEL

ON/OFF POWER SWITCH
Tap this button to turn On or Off the blender, once the indicator light is on, the blender will be in Activated Mode and Operating Mode,

POWER INSTALLATION INSTRUCTIONS

MULTI-FUNCTION MENU SELECTING
Turn this knob to each function for selecting different programs, then press the knob once to start the program

VARIABLE SPEED CONTROL
The knob allows the user to select the appropriate level of blending speed.
As the control knob is turned to a higher setting, the speed of the blades increases for a finer blend. For 1-8 gears, The left rotation downshift and the right rotation upshift are maximum 8 gears.

PULSE FUNCTION
The knob allows the user to select the Pulse program, pressing the button for a long time to start the pulse function. The pulse program will not be over until releasing the button. Once release the button, the machine will stop working

GENERAL INSTRUCTIONS

BEFORE FIRST USE
Please read this manual before you use the machine

• Remove all packaging
• Remove any labels and stickers from appliance unit
• Inspect the container, motor base, lid and blade assembly.

MAINTENANCE TIPS

• Never hit the container against the surface to loosen the ingredients
• Remove the container from the base and use a rubber spatula to remove thick mixtures from the bottom.
• DO NOT shake or rattle container whilst in use
• Never remove the container before the machine has come to a complete stop.
• Never start the motor before the container is in place
• If you detect a change in the sound of the machine, inspect for loose blade assembly or damaged blades. With caution and care, replace blades if necessary.
• DO NOT wash in the dishwasher.

USING THE MIX MASTER

1. Place liquid and soft food in the container first, solid items last. Thawed or partially thawed fruit is recommended

2. High speed is recommended for heavy-duty blending. You may also want to break the food into smaller pieces for quicker processing.

3. Set the container on the motor base by aligning it over the centering pad anchored to the base (motor must be completely stopped before positioning container.) Containers should not be used for hard, dry materials.

4. Always operate the machine with the complete two-part locked lid in place. When processing hot liquid, DO NOT use a non-latching or one-piece lid

5. For blenders with variable speed settings, select the desired speed. Most food should be blended at HIGH speed.

6. Start heavy or thick food at LOW speed and then switch to a HIGH speed once mixture beings processing.

7. Start at LOW speed if the blender is full to the maximum line or if you have placed hot liquid or food in the blender.

8. If your mixture stops circulating, it likely gets trapped by an air bubble. You can either use the mixing rod through the lid, or stop the motor and remove the container and stir the mixture from the sides of the container using a rubber spatula
   Note: Do not use metal utensils as it may damage the container.

9. After the blender has been stopped, let the blade come to a complete stop before removing the lid and/or container from the motor base.
   Warning: If you detect any change in the sound of the machine, or a distinct hard object comes into contact with the blades, do not serve the drink. Inspect your blade assembly for loss or nicked parts.

10. Remove the container, pour garnish and serve the drink.

11. Turn power OFF and/or unplug the machine when left unattended

CARE & CLEANING

BEFORE CLEANING
Disconnect the power plug before cleaning
Be careful when washing the container, keep your hands away from the blades.
DO NOT allow the motor base to contact water.
CLEANING THE CONTAINER

1. Fill container with 1/4 full of warm water and drops of liquid kitchen detergent in. Place container to motor base and firmly put the lid onto the machine and operate the machine for 30 seconds and empty the container.
2. Rinse the container with 3/4 full with warm water. Return the container to motor base and firmly put the lid onto the container. Run machine for 30 seconds and empty the container.
3. If any residue remains, remove the blade assembly and wash all container parts in warm soapy water. Reassemble the blade assembly for next use.
4. Allow container to air dry.

CLEANING THE LID

1. Separate the lid from the container. Wash in warm, soapy water.
2. Rinse clean under running water and dry.
3. Reassemble before next use

CLEANING THE MOTOR BASE

1. Unplug the power cord
2. Use a damp soft cotton cloth to wash the outside surface only. NEVER IMMERSE MOTOR BASE IN WATER OR OTHER liquid.
3. Clean around the edges of the switches and knob to ensure they work freely. Work the switched back and forth a couple of times.
4. Dry with a soft cotton cloth.

TROUBLESHOOTING

Higher than normal levels of vibration and container and replace.
Leaking from the bottom of the container.| Check blade assembly for loose, damaged or nicked components noise.
Machine will not run.| Double check to make sure power cord is firmly plugged into the power outlet.
Check to make sure switches are clean and can move freely.
The thermal protector may have shut the machine off. Leave power off for up to45 minutes. Try circulating air with a fan at the bottom of the motor base.
Loud noise from blade area.
Blades do not spin or rotate.| Drive socket may be broken. Check for a fine crack down the center or worn teeth. Replace with a bedrive.
If you can not fix your machine with these troubleshooting suggestions, please refer to the “After Sales Support” section for further details and help available.

WARRANTY

HOUSNAT provide a two-year product warranty from the date of purchase for all our products. We will take care of all quality-related issues with a REPLACEMENT or FULL REFUND including any return shipping costs. If you believe the product is defective and under warranty, please contact us at [email protected]
Please carefully follow our warranty process to minimize any delays:

1. Note the product model name. It can be found on a sticker located underneath or on the back of the product.
2. Provide order number for a purchase made through Amazon.

Special Notes:
Typical turnaround time to address Warranty claims is 10 business days, depending on your geographical location and type of damage or Warranty claim.

CUSTOMER SUPPORT

Should you encounter any issues or have any questions regarding your new product, feel free to contact our helpful Customer Support Team. Your satisfaction is our goal!
(*Please have your order invoice or order number ready before contacting Customer Support.)
CUSTOMER SUPPORT
Email: [email protected]
Facebook : www.facebook.com/Housnatkitchen/

HOUSEHOLD USE ONLYhttp://www.facebook.com/Housnatkitchen/
E Manufacturer: Shenzhen City Shi Ge Yi Trading Co., Ltd.,
Address: No.8B-1, Gudang Long Building, 162 Penghu North Road, Heehaw Community,
Penghu Street, Long Gang District, ShenZhen City, Gudang Dong Province, China 518000
Facebook Page: http://www.facebook.com/Housnatkitchen/
Email: [email protected]
Web: www.housnat.cc
MADE IN CHIN

References

• HOUSNAT | Less Pay, More Try

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>