HYTEK DP12-24.4 Diaphragm Pump Range User Manual
- June 14, 2024
- HYTEK
Table of Contents
HYTEK DP12-24.4 Diaphragm Pump Range User Manual
ENVIRONMENTAL INFORMATION
UK Regulation S1 2013 3113 requires that the equipment bearing this symbol on the product an/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product must be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
IMPORTANT WARNING NOTES
- The pump MUST NOT be used to dispense petrol or other flammable liquids.
- Installation of this equipment and its associated tank, pipe work and fittings should only be carried out by qualified installation engineers.
- The installation must conform to all relevant electrical and local authority regulations and standards.
DESCRIPTION
The Hytek range of diaphragm pumps are self priming and suitable for pumping water or agricultural chemicals. All pumps are designed for intermittent duty and are fitted with pressure switches for on-demand operation
INSTALLATION
The pumps are mounted via the soft rubber noise reducing mounts fitted to the base of each pump unit. The pumps are to be connected to a suitable power supply as follows:
-
12V DC:
Red = (+) Positive
Black = (-) Negative -
110V AC
Brown = Live
Blue = Neutral
Yellow/Green = Earth -
24V DC:
Red = (+) Positive
Black = (-) Negative -
230V AC:
Brown = Live
Blue = Neutral
Yellow/Green = Earth
OPERATION
- Ensure the inlet and outlet fittings are securely connected.
- Power up the pump and ensure that any nozzle or valve on the outlet is open. The pump will self prime and purge itself of any air present.
- Close the nozzle/valve on the outlet and the pump will now stop.
- Check the pump and all connections for any leaks after first use.
IMPORTANT: All Hytek diaphragm pumps are intermittent duty pumps, which have a duty cycle of a maximum of 30 minutes. This means after 30 minutes of constant usage the pump must be turned off and left to cool down for 30 minutes before it can be restarted. Electrical load and ambient temperature may affect the duty cycle. Using the pump beyond its recommended duty cycle may damage the pump unit, reduce the pumps lifespan, and could invalidate any warranty.
SPECIFICATIONS
See label on the pump unit for further information.
DECLARATION OF CONFORMITY
Company Name:
Hytek (GB) Ltd
Address:
Delta House
Green Street
Elsenham
Bishop’s Stortford
Hertfordshire
CM22 6DS
Date of Issue:
25th October 2022
Equipment Details:
DP12/24.4, DP110.17, DP12/220.17,
DP12.17KIT Diaphragm Pumps
Applicable & Standards Directives:
S1 2016 1091 Electromagnetic Compatibility Regulations
S1 2016 1101 Electrical Equipment Safety Regulations
S1 2008 1597 Supply of Machinery Safety Regulations
S1 2016 1105 Pressure Equipment Safety Regulations
S1 2013 3113 Waste Electrical & Electronic Equipment Regulations
Declaration Number:
UK079 Issue 3
On behalf of the above-named company, I declare under our sole responsibility that, on the date the equipment accompanied by this declaration is placed on the market, the equipment conforms with all technical and regulatory requirements of the above listed directives.
Clive Wellings, Process Co-ordinator
25th October 2022,
Bishop’s Stortford, Herts
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROTECTED BY COPYRIGHT © AND PROPERTY LAWS AND IS THE SOLE PROPERTY OF HYTEK (GB) LTD. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HYTEK (GB) LTD IS PROHIBITED
Applies to the following models only:
– DP12/24.4 – DP12/220.17 – DP110.17 – DP12.17KIT
Please read carefully before commencing installation
Registered Office: HYTEK (GB) LIMITED, Delta House, Green Street, Elsenham,
Bishop’s Stortford CM22 6DS UK. Registered in England No. 1915382
Tel: +44 (0) 1279 815 600
Fax: +44 (0) 1279 812 978
email: info@hytekgb.com
Web: www.hytekgb.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>