EYOOLD SA01 SATA/IDE to USB 3.0 Adapter Hard Drive Reader User Manual

EYOOLD SA01 SATA/IDE to USB 3.0 Adapter Hard Drive Reader

PRODUCT DESCRIPTION

• Product Name: Hard Drive Converter
• Product Size: 6.75cm 6.75cm 1.8cm
• Product Weight: 100g
• Cable Length (USB3.0 cable/power Adapter): 0.8M/1.2M
• Product Material: aluminum alloy
• Interface Type: SATA/IDE
• USB Port: USB 3.0 type A
• Input Voltage: 110V-240VAC
• Output Voltage: 12V DC
• Range of application: 2.5 “/3.5” SATA I/I/I SSD HDD
• Support devices: PS4/Xbox/TV/monitoring equipment
• Compatible System: Windows XP Vista/ 7/8/10, Mac OS 10 or higher

Overview and clone Function

Name of parts

1. LED
2.  CLONE
3. 3.5″IDE ( Source)
4. SATA1 ( Source )
5. SATA2 (Target)
6. ON-OFF
7. DC 12V
8. USB3.0
9. 4pin power

IDE Source to SATA2 Target

1. 1. Connect 4 Pin IDE Power Adapter
2. 2. Connect SA-01 to IDE Source Drive
3. Connect SA-01 to SATA2 Target Drive
4. Connect DC Power Adapter
5. Turn the Power Switch On

SA-01 Clone Function

1. Plug Source HDD to SA-01
2. Plug SATA2 Target HDD to SA-01
3. Connect DC Power Adapter
4. Turn on SA-01, Wait for the IDE/ SATA1 and

• SATA2 RED LED Light to Turn Solid (No Need to Connect USB 3 0 at This Time)
• Click the “CLONE” Button Once for 3 Seconds
• The BLUE LED Lights Will Start Blinking from 25% -100%
• After all 4 BLUE LEDs Turn Solid, Turn Off Unit
• Connect SA-01 to the PC by USB 3.0 Cable, and Turn On the Unit to Verify That the Clone is Complete.

NOTICE:

• Ensure Target Drive has a Larger Capacity and is Formatted Before Cloning
• Do NOT Connect SA-01 to USB 3.0 when Cloning
• If Source HDD is 2.5″ IDE Use a 2.5″IDE Bridge Board

IDE Source to SATA2 Target

1. Connect 2.5″ IDE Bridge Board to 2.5 “IDE HDD
2. Connect 4 Pin Power Adapter
3. Connect SSA-01 to 2.5″IDE Bridge Board
4. Connect DC Power Adapter
5. Connect SATA Target Drive
6. Turn the Power Switch On

& 2.5″ SATA1 Source to SATA2 Target

1. Connect SA-01 to 2.5″ / 3.5″ SATA1 Source Drive
2. Connect SA-01 to 2.5″ / 3.5″ SATA2 Target Drive
3. Connect DC Power Adapter
4. Turn the Power Switch On

Please note:

1. Fail to clone, please check whether the capacity of SATA2 is larger or equal to SATA1/IDE.
2. Offline cloning, 25% 50% 75% 100% LED flashes at the same time. The SATA2 indicator goes out. The reason may be the hard disk’s bad sectors; Data virus; Hard disk Yes Failed; or SATA1 / IDE capacity exceeding SATA2.
3. After cloning, SATA2 couldn’t pop up when connected to the computer. Please right-click directly “Computer Management – Disk Management to find it.
4. For cloning, please mind SATA2 data will be completely covered by SATA1 And clone failure may lead to data loss. You need to backup the contents of your drive to a separate storage.
5. Under the condition of power failure in the clone process, the source disk and the target disk data may be lost. Please backup your data first
6. This adapter can connect up to two drives at the same time

SA-01 to PC

1. Connect SSA-01 to SATA 2 Target Drive
2. Connect USB 3.0 to PC or Mac
3. Connect DC Power Adapter
4. Turn the Power Switch On

INTIALISE & PARTITION

1. For old hard drives, you can find the disks in your “Computer”.

• For new hard drives, you have to find disks in’Disk Management” as follows(Windows 10)
• a. Right-click “Computer” -Manage Disk Management, and then choose the new disk to initialize it.
• Please note: For HDD under 2TB, please select a partition, while for 2TB or more than 2TB, please select MBR partition.
• c. According to the following tips choose volume size to establish different partitions.
• Please note : For HDD under 2TB, please select MBR partition, while for 2TB or more than 2TB, please select GPT partition.
• b. Right-click “Disk 1” New Simple Volume. please select MBR partition.
• d. You will find the new disk in Devices and drives.

Diagramming of parallel port hard disk line setting

• In general, the hard disk can be used so do not need to change, if it can not identify the hard disk or connect multiple hard drives, you should set the hard disk Master or slave.
• There is no standard, according to the front of the label on the hard drive to set. Such as Seagate hard

USB Safe Removal

• Always use the Safely Remove Hardware feature before shutting down the docking or disconnecting the USB cable and power cable.
• It may cause data corruption if do not do USB-safe removal correctly.
• To guarantee system integrity and the safety of the product, please follow the below operation for USB-safe removal.

1. Make sure the docking is not in working condition, no access operations command, and the indicators are not blinking.
2. Right-click the device icon from the system tray at the lower right corner of your screen. (Figure 1)
3. Click the device icon for safe removal, the system will prompt: [The device can be safely removed from the system] (Figure 2)
4. Click on OK to close the prompt window

FAQ

1. Q Why is the IDE hard disk not recognized?

   • A : 3.5 “IDE hard disk Please check whether the IDE 4-pin power cable / USB cable is connected well.
   • B : Please make sure the hard disk jumper is set correct

2. Q: Does it support a 5.25-inch optical drive?
   A: This product supports most models of optical drive on the market, but may not support a small portion of old optical drives.

3. Q: Whether to support hot swap

4. A. Does not support hot- -swap. You need to turn the power off before plugging or unplugging hard drives to avoid data loss. If you plug or unplug hard drives when in power and result in data loss, the company does not take the relevant

Q: Why Win10 can not recognize it?

• A : Please back up the hard disk data, and format the hard disk again.
• B : Unrecognized under win10 please try the method (pictured)

Warranty Information

1. Thank you for choosing the products. For correct operation, please be sure to read the manual and all the safety precautions on the products carefully. Please keep this manual for future reference.
2. Our limited warranties are void if a product is returned with removed. damaged, or tampered labels or any alterations (including removal of any component or external cover). Our warranties do not cover data loss back up the contents of your drive to a separate storage medium on a regular basis. Also, consequential damages; incidental damages; and costs related to data recovery; removal, and installation are not recoverable under our warranties
3. Confirm whether there is a USB interface on the PC or laptop. If your PC or laptop has no USB port, please install the corresponding USB adapter card.
4. Please use the USB cable provided by Technology.
5. Although USB supports hot-swap, when you remove the HDD/SSD, make sure the HDD/SSD is not working to prevent data loss.
6. Please confirm whether the system installed the USB driver if using the OS below the Windows ME / 2000 / XP version.
7. Do not disassemble, shake or drop this product.
8. Do not use this product under high temperature, low temperature, humidity, dust, and exposed to the sun for a long time.
9. Gently clean the product casing without chemical solvent.
10. Technology warranties do not cover any problem that is caused by (a) commercial use; accident; abuse; neglect; shock; electrostatic discharge; heat or humidity beyond product specifications; improper installation; operation; maintenance or modification; or (b) any misuse contrary to the instructions in the user’s manual; or (c) lost passwords; or (d) malfunctions caused by other equipment.

Disclaimer

1. Technology products have different accessories with different models.
   • Please refer to the manual. Technology may improve product functionality, appearance design, and specifications without notice.
2. Please understand the pictures of this manual may differ slightly from the actual product.
3. This user manual has been subjected to thorough reviews and verifications to ensure the accuracy of its content and contains information that’s pertinent to the model and series it describes at the time of publication. However, the content of this manual and/or product specifications are subject to change without prior notice and with no direct or indirect liability on the Technology part concerning such change.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>