SHINEONER PB50 Smart Dog Bark Control Collar User Manual

SHINEONER PB50 Smart Dog Bark Control Collar

Warning

• Tips: The bark training collar can not stop your dog barking immediately, it’ straining tool .Every time your dog barks, the bark collar will automatically give little safe punishment, such as an audible warning, or a vibration, or an electric shock. After a long period of training, your dog will drastically reduce barking
• WARNING: please charge the product with a 5V output charger only!
• Not suitable for dogs under 6 months and less than 8 pounds. Don’t use it with aggressive dogs. Please use it under supervision.
• Please don’t leave the product on the dog for over 12 hrs a day. Long time wearing is the reason why training collars in the market leave sores on dog’s neck. Also do not tie the belt to the collar.
• Check the contact area every day for rashes or sores. If you find that, leases to posing this product immediately until the skin is healed.
• Wash the dog’s neck area, probe cover with a damp cloth weekly.
• The environmental noise, temperament, and dog’s breed or dog’s body type may affect the bark control collar effect. For more information, please refer to the recommendations for appropriate sensitivity levels.
• To better protect your pet’s skin, please wear the probe cover before use.
• It’s not a leash collar. Don’t use it with dog leash!
• Charge the collar every month if you don’t use it for a long time
• If it runs out of battery totally, it will need 50% more time to activate the battery (The battery is not broken in this situation.)
• Keep the charging port dry before you plug the cable in and charge the collar!
• 1-Year-Warranty : If you have any question about the collar, please check the manual first. If you can’t solve the problem, please contact us at the support email.

Product Description

Product Information

• Bark Collar

• User Manual

• Strap
  

• Metal Prongs

• Prong Covers

• Magnetic Charging Cable

• Test light

Note:

1. The wall Charger/ Charging is not included to protect the environment. It’s compatible with USB Port. Please use other 5V chargers/USB Ports.
2. The rubber covers can transmit static shock. Please put them on the prongs to protect your dog’s neck.

Definition of Button

Charging

1. Charging (Please fully charge the bark collar before you use it.)

Charging Indicator Description

1. When low power occurs, please charge in time;
2. Please use an adapter (within 5V output voltage) to charge the product, otherwise it may cause permanent damage to the product.
3. It’s recommended to charge by connecting with USB jack of computer, cell phone wall charger, or power bank, which meets the charging input requirements of the product.

Work light

1. Turn on the bark collar, the green light will flash once and the screen will show the sensitivity level. The indicator will flash green every 5 seconds, indicating that the product is in standby mode. The product will enter standby mode without detecting barking in 2 minutes. And the product will be activated automatically when any barking sound is detected.
2. When the power level is lower than 20%, the standby flicker will turn to red, and it indicate to be charged.
3. When the charging is about to complete, the indicator light will change from red to green.

User Guide

Sensitivity

1A. Long press the SENSITIVITY button(which is also the power button)to power on .Press the button again for 3 seconds and it will power off. When it is working, click this button to adjust the bark recognition sensitivity of the product.

1B. Levels 1-5 are the adjustment of the sensitivity of the product’s barking recognition, Level 5 is the most sensitive level and level 1 is the least level.
1C. The bark collar uses an intelligent identification IC, which can identify the barking frequency and decibels of dogs. However, some dog barking sounds may be special in the actual application environment, and a small part of the barking may be similar to the dog barking frequency in a practical environment, so we suggest the following usage.

• In the early use, please stay with your dog until he/she gets used to the collar.
• When your dog is playing with other dogs, we do not recommend using the bark collar in this environment, because dogs are prone to barking when they are playing and getting excited.
• When wearing the product for the first time, please select level 3, which is the moderate sensitivity level that suits most situations .
• If some sounds can activate the product, the frequency of the sound may be similar to that of a 1 dog barking. If the dog is in sound environment, the sensitivity will need to be reduced.
• The bark collar collects most of the dog barking. If your dog barks sometimes cannot activate the product, you can try to increase the sensitivity level.

Static Shock

2A. In the power-on state, click the “SHOCK” button to select the intensity of electric shock when the product is activated. Level 1 represents the weakest intensity, and level 5 is the highest intensity.
2B. If the level O is selected, it will not have any electric shock when the product is activated to work, and it will only warn the dog through beep and vibration. By adjusting the shock level, you can switch between shock mode and no shock mode.
2C. Please try the no shock or low shock mode in the early use.
 At this time you have completed all the settings, and then you need to wear the product correctly on the dog’s neck. The wrong way of wearing may cause damage to the product and adverse reactions to the dog, as well as affect the effect of use.

Fit the collar

1. Make sure your pet is standing comfortably to fit it correctly(3A).

2. Place the collar on the middle of your pegs neck and avoid it being loose(3B).

3. Please ensure to fit the collar snugly. yet loose enough to allow two
   

4. Please check whether contact points touch dog’ s neck. If dog’ s fur is too long, please change to longer contact points or trim the fur, otherwise, shock won’ t work (because fur is a nonconductor.)

5. The collar is ABS plastic and compound rubber, please prevent dog from biting.

6. Contact points are made of silicone and most dogs can wear it comfortably. If some dogs are allergic to silicone or feel uncomfortable with collar, please stop using it and consult a veterinarian.

7. Do not use the collar directly as a binding leash, as this will cause great harm to the dog and the product.

8. lt is recommended not to exceed the wearing time for 12 hours a day, and please observe the wearing of the dog regularly. Long wearing time may affect the dog’s skin.
   

Working Mode

After setting up and wearing it, bark collar will automatically recognize the dog’s barking and give corresponding warnings and punishments, allowing the dog to slowly realize and stop barking, thus becoming a quiet good boy.

3A. The current shock intensity is 0. it means turning off the static shock and collar is in no-shock mode

When the dog activates the product every time, the bark controller will give an audible warning first and then a vibration warning. As long as the dog continues to bark, it will continue to repeat this instruction.

3B. The current shock intensity is 1-5.The shock mode is on .

NOTES:

Remains in Step 6 if your Dog keeps barking Back to step 1 if the device not activated for1minute

Frequently Questions and Answers

”Q:

”A:

”Q:

”A:

”Q:

”A:

”Q:

”A:

”Q:

”A:

”Q:

”A:

”Q:

”A:

”Q:

”A:

”Q:

”A:

”Q:

”A:

”

A:Sorry,the covers are designed to protect your dog’s neck. It will not effect the collar’s function. Please contact us at Support@Nouaksy.com if your silicone covers are lost. [/sc_fs_faq]

Please read the instructions carefully before using this product for the first time.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>