PrimeZone Home Office Desk Chair Installation Guide
- June 14, 2024
- PrimeZone
Table of Contents
PrimeZone Home Office Desk Chair
Product Information
Specifications
- Designed for one person to use at a time
- Maximum weight capacity: 300 lbs
After-Sales Service If you encounter any problems, such as missing parts or a damaged product, please contact us by email at hello@larksperalhome.com. We offer free replacements or prepaid return labels. Please provide a brief description of the problem and include photos of the damaged product in your email.
FAQ
Q: Can I use this chair as a step ladder
A: No, this chair should only be used as a chair and not as a step ladder.
Q: What is the maximum weight capacity for this chair
A: The maximum weight capacity for this chair is 300 lbs.
Q: How often should I check the bolts, screws, and knobs
A: It is recommended to check all bolts, screws, and knobs every 90 days.
Tighten any loose ones if necessary.
Q: What should I do if I encounter any problems with the product
A: If you have any problems such as missing parts or a damaged product,
please contact our after-sales service email at
hello@larksperalhome.com. We will provide
free replacements or a prepaid return label. Please include a brief
description of the problem and photos of the damaged product in your email.
COMPONENTS
- Headrest (A)
- Backrest (B)
- Seat Cushion (C)
- Base Plate (Ax1)
- Chair Cylinder (Bx1)
- Foot Stool (Cx1)
- Armrest (D)
- LR (Dx2)
- Castors
- Decorative Cover (Ex1)
- 6*18MM Bolt (Fx1)
- 6*20MM Bolt (Gx1)
- 6*25MM Bolt (Hx5)
- 6*45MM Bolt (Mx4)
- M6 Bolt (Sx1)
Before assembling, please make sure all parts are included. If there are missing parts, please contact the after-sales email immediately, and we will send you a replacement.
ASSEMBLY INSTRUCTION
- Attach the Chair Cylinder (Bx1) to the Base Plate (Ax1).
NOTICE
Please be careful with the oil on the gas lift.
- Attach the Foot Stool (Cx1) to the Base Plate (Ax1)
NOTICE
Don’t tighten the bolts before the product is fully assembled.
- Attach the Castors to the Base Plate (Ax1)
NOTICE tighten the bolts before the product is fully assembled.
- Attach the Backrest (B) to the Base Plate (Ax1).
NOTICE
Don’t tighten the bolts before the product is fully assembled.
- Attach the Armrest (D) to the Base Plate (Ax1).
- Attach the Decorative Cover (Ex1) to the Base Plate (Ax1).
NOTICE
Tighten all the bolts after full assembly.
FINISH
IMPORTANT INFORMATION
PLEASE READ CAREFULLY
- Do not stand in this chair or use the chair as a step ladder use it as a chair only.
- This chair is designed for one person to use at a time. This chair is designed for one person weighing up to 300 lbs.
- Do not use this chair until all bolts, screws, and knobs are installed.
- Check all bolts, screws, and knobs every 90 days. Tighten if any are loose.
- Failure to follow these instructions may result in serious injury of yourself and the people around you.
- Some of the parts are heavy and/or has shaped edge, please install them carefully to avoid hurting yourself and the people around you.
AFTER-SALES SERVICE
Any problem, whether it’s a missing part or a damaged product. If you need a
replacement or return a package, please contact us by email, we will provide a
replacement for free or prepaid return label. Please include a brief
description of the problem and photos of the damaged product in your
email. hello@larksperalhome.com