Brecknell PS330 Parcel and Shipping Scale User Manual
- June 14, 2024
- Brecknell
Table of Contents
Brecknell PS330 Parcel and Shipping Scale
General Information
Congratulations on the purchase of your new PS scale. Please read this guide to become familiar with the operation of this product. Save this guide for future reference.
- Do not put excess weight or drop items on the scale. This could damage the weighing mechanism and or affect the scale accuracy.
- Do not use or store the scale in a high temperature, high humidity or high vibration area.
- The batteries should be replaced when the low voltage is indicated.
- Use a mild soap solution with a cloth to clean the scale, by spraying the cloth and wiping the scale.
- Do not use any harsh chemical cleaner.
- Do not wash down or immerse the scale in any way as this would cause permanent damage.
Specifications
- Weighing Platform: 390 x 310mm stainless steel
- Indicator: Rugged ABS housing, LCD display with backlit
- Maximum Capacity:
- Division: 0.1 lb / 0.05 kg, 0.2 lb / 0.1 kg
- Weighing Unit: kg, lb, lb: oz
- Operation keys: ON/OFF/ZERO, UNIT, COUNT, TARE
- Power: A/C adapter; Output 6vdc, 500ma (included)
- 4x AA batteries (not included)
- Auto-off Time:5 Minutes or disable the function. The default setting is 5 minutes
- Overload Indication: overload
Basic Operations
Battery Installation and Power Supply
The scale can be powered by using the supplied external power supply or by
installing 4 AA batteries (not included) into the battery compartments on the
rear of the indicator. If using batteries, be sure to observe battery polarity
before installing.
Power on
Place the scale on a hard, flat, and level surface. Use a short press of the
ON/OFF/ZERO key to power on the scale. The display will show 88888, then show
0.00kg for BPS75 and 0.0kg for BPS150 a few seconds later, the scale will now
be ready to use.
Power off
Press and hold the ON/OFF/ZERO key to power the scale off. The scale is set to
automatically power off after 5 minutes if the scale is not in use. To disable
this function…
- Press and hold the TARE key, until 300 is displayed.
- Press the TARE key again and NOOFF will be displayed.
- Press the UNIT key to return to normal weighing mode.
- The scale will now remain on until manually powered off.
Unit Selection
Choose the display weight unit from kg, lb, or lb: oz. When in weighing mode, press the UNIT key to toggle between the three units of measure.
Normal Weighing
Place the object on the center of the platter. The scale will display the
weight of the object when the reading is stable.
To Perform a Tare
When the weight reading is stable and the reading is 0.0, place the item on
the scale and wait for a stable weight. Press the TARE key to take off the
weight.
To perform a Count
When in counting mode, this scale can be used to count components of the same
weight.
- Press the COUNT key to enter the counting mode. The display will show 0.
- To calculate the piece weight of the parts or components to be counted, place a known quantity of parts (25,50,75 or 100) onto the weight platform. A long press on the COUNT key will now display 25pcs.
- To change the sample quantity, keep pressing the UNIT key, until the correct quantity of parts is shown (25,50,75 or 100). Press the COUNT key to confirm the sample.
- Place the remaining number of parts to be counted onto the weight platform and the scale will now display the correct quantity of parts on the scale.
To perform Calibration
-
Your scale provides single-point calibration in both lb and kg. Before calibrating the scale, you should ensure that you have a suitable known weight for calibration. Using a larger weight for calibration provides higher accuracy.
-
Power on the scale. After the indicator displays 0.0 or 0.00, press and hold the UNIT key for 3 seconds until the display shows CAL. The display shows, “kg.” Press the UNIT key to switch the calibration unit between “lb” and “kg.” Press TARE to confirm the selection.
-
The indicator will display the default calibration weight. If using kg as the calibration unit, the default calibration weight is 50 kg for the PS165 and 100 kg for the PS330. If using lb as the calibration unit, the default calibration weight it 150 lb for the PS165 and 300 lb for the PS330.
-
Press the UNIT key to switch to other calibration weights (10 kg, 20 kg,30 kg,40 kg, 50 kg, 100 kg, 150 kg, or 50 lb, 100 lb, 150 lb, 200 lb, or 300 lb), if needed.
-
After selecting the Calibration weight on the indicator, press the TARE key to confirm it. Then the selected weight
will be flashed, put the corresponding weight onto the weighing platform. -
Press the TARE key to confirm. The blue backlight will turn off. The weight digits will flash for a few seconds before displaying PASS. Calibration is now complete and the scale will automatically return to normal weighing mode.
Brecknell – USA
- 1000 Armstrong Drive
- Fairmont MN 56031
- Toll Free: 800-637-0529
- Tel: 507-238-8702
- Fax: 507-238-8271
- Email: [email protected]
- www.brecknellscales.com
Brecknell – UK and Europe
- Foundry Lane Smethwick,
- West Midlands, B66 2LP.
- Tel: +44 (0) 845 246 6717
- Fax: +44 (0) 845 246 6718
- Email: [email protected]
- Website: www.brecknellscales.co.uk
FAQs
What is the Brecknell PS330 Parcel and Shipping Scale?
The Brecknell PS330 Parcel and Shipping Scale is a digital weighing scale designed for accurately measuring the weight of parcels and packages, making it ideal for shipping and postage purposes.
What is the maximum weight capacity of the PS330 scale?
The maximum weight capacity of the Brecknell PS330 Parcel and Shipping Scale may vary by model, so it's important to check the specific product specifications. However, it is typically designed to handle a substantial weight range.
Is the PS330 scale suitable for commercial use?
Yes, the Brecknell PS330 Parcel and Shipping Scale is often used in commercial settings due to its precision and durability.
Does the scale have a tare function?
Yes, many models of the PS330 scale feature a tare function, which allows you to zero out the weight of containers or packaging materials, ensuring accurate weight measurements of the contents.
Is the PS330 scale powered by batteries or AC power?
The power source for the Brecknell PS330 Parcel and Shipping Scale may vary by model. Some models can be powered by batteries, while others may require AC power. Check the product specifications for details.
Does the scale provide weight measurements in different units?
Yes, the PS330 scale often allows you to select from various units of measurement, such as pounds (lb) or kilograms (kg), depending on your preference or shipping requirements.
Is the PS330 scale easy to calibrate?
Calibration procedures may vary by model, but the PS330 scale is generally designed to be user-friendly and straightforward to calibrate for accurate weight readings.
Does it have an LCD display for weight readings?
Yes, the Brecknell PS330 Parcel and Shipping Scale typically features an LCD display that provides clear and easy-to-read weight readings.
Can the scale be connected to a computer or printer?
Some models of the PS330 scale offer connectivity options, allowing you to connect it to a computer or printer for efficient record-keeping and label printing. Check the product specifications for compatibility details.
Is there a warranty provided with the PS330 scale?
The warranty for the Brecknell PS330 Parcel and Shipping Scale may vary by manufacturer and model. Refer to the product documentation or contact the manufacturer for warranty information.
Can it be used for international shipping with different weight units?
Yes, the PS330 scale's ability to measure weight in different units makes it suitable for international shipping, where weight may be specified in kilograms or other units.
Is the PS330 scale suitable for small businesses?
Yes, the Brecknell PS330 Parcel and Shipping Scale is often used by small businesses for managing shipping and postage needs efficiently and accurately.
Download This PDF Link : Brecknell PS330 Parcel and Shipping Scale User Manual