Jabra PHS080W Elite Speaker User Manual

ELITE SPEAKER
Technology for life’s new rhythm
USER MANUAL

Welcome

Thank you for using the Jabra Elite Speaker.
We hope you will enjoy it!
Here are some key features of the Jabra Elite Speaker:

• Full duplex audio for natural conversations
• Four beamforming noise-cancelling microphones
• Voice Level Normalization equalizes all voices
• Full-range 50mm speaker & wideband audio
• Aluminum detailing & fabric speaker cover

Overview

2.1 Included accessories

Carry pouch

Position guide

For the optimal audio quality, position the speakerphone in the center of the table, up to 2.3m/7.5 ft from each participant, but no closer than 0.5m/1.6ft.

How to charge

4.1 USB charging
Plug the speakerphone into a USB power source using the attached USB cable. The battery lasts for up to 12 hours of wireless use. Depending on the power output of the port, faster charging is available when using USB C.

4.2 Automatic power off
To preserve battery while unplugged, the speakerphone will power off if it has not been connected to a Bluetooth device for 15 minutes.
If connected to a Bluetooth device and not plugged into power, the speakerphone will power off after 8 hours of no interaction.

4.3 Battery status
To view the current battery status, tap the Battery status button. The LED ring will flash to indicate the status.
When the battery status is critically low, the LED next to the Battery status button will flash red.

How to connect

It is recommended to connect to a computer using the integrated USB cable since this connection is certified and ensures an optimal audio quality. A standard Bluetooth connection to a computer is not certified and may not have the same audio quality as a USB connection.
5.1 Connect to a computer
Plug the speakerphone into a USB C or USB A port on your computer.

You may need to set the Jabra Elite Speaker as the playback and recording device in your operating system audio settings.
The USB A adapter must not be removed from the cable and should not be used with other devices.
5.2 Connect to a smartphone or tablet
Hold the Bluetooth button for 3 seconds and follow the voice-guided instructions to pair to your smartphone or tablet. The Bluetooth range is up to 10m/33ft.

To disconnect or reconnect, tap the Bluetooth button again.

How to use

6.1 Typical use

| WHAT| HOW
---|---|---
| Power on/off| Hold (2 sec) the Power button
| Answer call| Tap the Answer call button
| End /reject call| Tap the End call button
| Volume down/up| Tap (or hold) the Volume down or Volume up button
| Mute/unmute microphone| Tap the Mute button
| Battery status| Tap the Battery button
| Bluetooth pairing| Hold (3 sec) the Bluetooth button and follow the voice- guided instructions
Connect to a previously paired Bluetooth device| Tap the Bluetooth button

6.2 Multiple call handling

| WHAT| HOW
---|---|---
| Put current call on hold and answer incoming call| Tap the Answer call button
Switch between held call and active call| Tap the Answer call button
| Reject incoming call and continue current call| Tap the End/reject call button

6.3 Smart button
The Smart button can be customized using Jabra Direct.
The options available are:

• Play/pause music (default)
• Mobile device voice assistant
• None

6.4 Status LED ring

| Muted
| Incoming call
| Factory reset
| Firmware update
| Standby/media streaming

6.5 Audio notifications
The speakerphone indicates factory reset,battery level, pairing and Bluetooth connectionstatus. You can select tone or voice notificationsusing Jabra Direct.
The supported languages are English, Chinese Mandarin, German, French, Japanese, Korean and Spanish.

6.6 Auto-reconnect
When Auto-reconnect is enabled (default), the speakerphone will automatically connect to a previously paired Bluetooth device.
If the speakerphone is used in a meeting room or by several people, it is recommended to disable auto-reconnect to avoid unintentional connections. If Auto-reconnect is disabled, the speakerphone will only allow one Bluetooth connection at a time and all previously paired Bluetooth devices will be unpaired and need to be paired with the speakerphone again.
Auto-reconnect can be configured in Jabra Direct.
To pair a device with the speakerphone, hold (3 sec) the Bluetooth button on the speakerphone and follow the voice-guided instructions.

6.7 Factory reset
Resetting the speakerphone clears the list of paired Bluetooth devices and also clears all personalized settings. After a factory reset, it is necessary to re-pair the Jabra Elite Speaker to your Bluetooth devices.
To factory reset, hold the Answer call button and the End call button for 8 seconds until ‘restore to factory default’ is announced by the speakerphone.

Applications and firmware update

7.1 Jabra Direct
Jabra Direct is a desktop application designed to support, manage and enable optimal functionality for Jabra devices.

Download the latest free version from jabra.com/direct
7. 2 Update firmware
Firmware updates improve performance or add new functionality to Jabra devices. Jabra Direct will notify you when a firmware update is available.
Connect the Jabra Elite Speaker to a computer using the USB cable.

Support

8.1 FAQ and technical specifications
View the FAQ, certifications, and technical specifications at jabra.com/support.
8.2 How to care for your Jabra device

• The Jabra Elite Speaker is for indoor use only.

• Avoid storage at extreme temperatures (above 45°C/113°F or below -20°C/-4°F).

• Avoid operation at extreme temperatures (above 45°C/113°F or below 0°C/32°F).

• Do not expose the speakerphone to rain.
  Avoid immersing the speakerphone in liquids.

• Do not cover the speaker mesh and buttons with stickers or labels.

8.3 How to clean your Jabra device
Keep your product clean by following these best practices for hygiene.

1. Apply normal dish soap and water to a cloth, making sure you wring out excess liquid so the cloth is not dripping wet. Use soap and water only – do not use strong cleaning agents.
2. Gently wipe the product, making sure there is not a layer of suds on the surface.
3. Let it rest for at least one minute.
4. Rinse the surface by wiping it with a slightly damp cloth using water only.
5. Let it dry.
6. When the product is not in use, keep it clean by avoiding contact with dirty surfaces and storing it in the carry pouch.

© 2023 GN Audio A/S. All rights reserved. Jabra® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license.

Made in China
MODEL: PHS080W Declaration of Conformity can be found on
www.jabra.com/doc

Documents / Resources

| Jabra PHS080W Elite Speaker [pdf] User Manual
PHS080W, PHS080W Elite Speaker, Elite Speaker, Speaker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>