CUTTEREX 13 Free 360 Degree Vinyl Laminate Floor Cutter User Manual
- June 14, 2024
- CUTTEREX
Table of Contents
CUTTEREX 13 Free 360 Degree Vinyl Laminate Floor Cutter
Product Information
- Key Features:
- Advanced technology for superior performance
- Durable construction for long-lasting use
- Versatile design for various applications
- Easy to use and maintain
- Specifications:
- Power: AC 100-240V, 50/60Hz
- Dimensions: 10″ x 5″ x 3″
- Weight: 2.5 lbs
- Material: High-quality plastic and metal
Product Usage Instructions
- Step 1: Unpacking
- Remove the product from its packaging and ensure that all the included accessories are present.
- Step 2: Installation
- Choose a suitable location for the product installation. Ensure that there is sufficient space and proper ventilation. Connect the product to a power source using the provided power cable.
- Step 3: Setup
- Follow the on-screen instructions to set up the product. This may involve configuring settings, connecting to a network, or performing calibration procedures.
- Step 4: Operation
- Once the product is set up, it is ready for operation. Familiarize yourself with the control panel and user interface. Use the provided documentation to understand the various functions and features of the product.
- Step 5: Maintenance
- Regularly clean the product using a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials that may damage the surface. Refer to the user manual for specific maintenance instructions.
- Step 6: Troubleshooting
- If you encounter any issues with the product, refer to the troubleshooting section of the user manual. Follow the recommended steps to resolve common problems. If the issue persists, contact customer support for further assistance.
- Frequently Asked Questions (FAQ)
- Q: What is the warranty period for this product?
- A: The warranty period for this product is 1 year from the date of purchase.
- Q: Can I use this product with a different power source?
- A: No, this product is designed to be used with the specified power requirements. Using a different power source may damage the product and void the warranty.
- Q: Is this product compatible with Mac computers?
- A: Yes, this product is compatible with both Windows and Mac operating systems.
- Q: Can I connect multiple devices to this product?
- A: Yes, this product supports multiple device connections. Refer to the user manual for instructions on how to connect and switch between devices.
SAFETY RULES
- READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE OPERATING THE 13″ FLOORING CUTTER.
- If you are not thoroughly familiar with the operation of the 13″ Flooring Cutter, please send e-mail to: service@SpeedForceUSA.com
- Stay alert. Do not operate while under the influence of drugs, alcohol, or medication.
- Always wear safety approved eye protection with side shields (ANSI Z87.1).
- Keep work area clean and free of debris.
- Keep children and unauthorized persons away from the 13″ Flooring Cutter and work area.
- Make sure tool is secure. Operate only on a firm substrate or solid stand.
- Use the right tool. Do not force the 13″ Flooring Cutter or use it for a job for which it was not designed; use only on approved materials.
- Keep blade sharp. A dull blade will not perform properly.
- Always keep hands away from blade while operating or carrying.
- Do not alter or misuse this tool. The 13″ Flooring Cutter is precision built; modifications not specified in this manual may result in a dangerous condition.
- Maintain the 13″ Flooring Cutter with care. Keep blade sharp and clean. Follow instructions for lubricating and changing accessories.
- Use only recommended accessories. The use of improper accessories may cause hazards or injury.
- Never leave the 13″ Flooring Cutter unattended. Secure the handle with the lock chain when not in use.
- Warning: The dust generated by cutting certain wood, wood fiber and / or PVC products can be harmful to your health.
SET UP
- ASSEMBLY
- The floor cutter has been fully assembled and adjusted before leaving the workshop, and can be used right out of the box after the handle is tightly mounted on the Cam Shaft.
- The function of Adjustment Bolt (A) and Adjustment Bolt (B) in Fig.2 are to adjust the blade height. They are pre-set and no need to re-adjust before first job.
- SETTING UP FOR OPERATION
- The laminate flooring cutter is shipped with the blade assembly in the down and locked position.
- This safety feature ensures that the cutting edge of the blade is not exposed during transport or storage.
- To unlock the blade, loosen Velcro strap and depress the handle.
- Warning! Secure handle in the down position and re-engage the Velcro strap before storing, carrying or transporting- ing your laminate flooring cutter.
- CUTTING PREPARATION
- Warning! Do not put your fingers against the sharp edge of the blade at any time.
- Put floor plank on the work table and adjust the cutting length by rule (A and B)
- STRAIGHT CUTTING
- Insert material between the cutting blade and the base, hold the material with foot then push handle down to complete a cut.
- Warning! Maintain control of the handle. Do not allow handle to slam back after making cut.
- ANGLE CUTTNG
- Insert material between the cutting blade and the base by Angle Lines on the work table, then push the handle down to complete a cut.
- Warning! Maintain control of the handle. Do not allow handle to slam back after making cut.
- Warning! Do not put your fingers against the sharp edge of the blade at any time.
BLADE ADJUSTMENT
ADJUSTING THE BLADE
- Untighten the Lock Nut A (Fig.6)
- Turn Adjustment Bolt B (Fig.7) clockwise to press blade to a lower position to compensate for the blade wear.
- NOTE: The pitch on each turn of bolt B is 1.5mm. It is suggested to rotate bolts on each side of the cutter 1/3 of a turn to lower the whole blade by 0.5mm and tighten the Lock Nut A to secure the position of Adjustment Bolt B. The adjustment of both bolts must be the same.
- Cut a piece of paper to ensure the tool is set correctly (Fig. 8). The test paper should be cut off over 30% of the length.
CUT GUIDE
Your tool cuts a wide variety of products. Please refer to this cut guide for
recommended products and thicknesses.
- PVT Tile 5/16″ (8mm)
- WPC 5/16″(8mm)
- SPC 5/32″(7mm)
- Vinyl Composite Tile 5/16″ (8mm)
- Rubber Tile 5/16″ (8mm)
- Soft Plastic 5/16″ (8mm)
WARNING: VERY SHARP BLADE
HONING BLADE
- Removing burrs from the flat edge of the blade is very important, honing a new blade should be done after the first 100-300 cuts, after every 200+ cuts and when the blade has been re-sharpened.
- With the blade (Fig. 9-B) installed and positioned roughly 1/8″ above the table top, lay the flat side of your small honing stone (Fig. 9-A) against the flat side of the blade.
- Move the honing stone from one end to the other a few times until burr has been removed.
SHARPENING OR REPLACING BLADE
- The included blade can be sharpened.
- Only the beveled edge of the blade must be sharpened. The flat edge of the blade must remain flat. We recommend that this operation be done by a qualified professional.
Warning! Blade is very sharp. Wear gloves when handling blade.
- To remove the blade (Fig. 10-A), remove the seven allen head screws (Fig. 10-B) & Spring Washers using the supplied hex. key. Carefully remove the blade.
- Once blade has been sharpened or replaced, it can be re-installed. Position the blade (Fig. 11-A) with its flat edge facing the table (Fig. 11-B). Make sure the mounting surface and blade are clean, re-install the blade with the seven allen head screws removed earlier using the supplied hex key.
LUBRICATION
To prevent surface corrosion, it is recommended to apply a small amount of
light machine oil on the sliding parts of the laminate cutter. Lubrication
should be done once every two months or once a month if working in dirty or
dusty conditions.
WARNING: VERY SHARP BLADE
EXPLODED PARTS DIAGRAM
PARTS NAME
WARNING: Read and understand all instructions. Failure to follow all instructions may result in serious bodily injury. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.- QUESTIONS? CONCERNS? MISSING PARTS? DO NOT RETURN TO THE STORE
- INSTEAD CONTACT CUSTOMER SERVICE: Service@SpeedForceUSA.com.
- WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood-dust.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>