Blutezeit ME-SP-2 Cordless Electric Sprayer User Manual

Blutezeit ME-SP-2 Cordless Electric Sprayer

SAFETY PRECAUTIONS

CAUTION!
READ THROUGH THE WARNINGS AND INSTRUCTIONS INSURETHAT YOU HAVE FULL UNDERSTANDING ABOUT THE OPERATION BEFORE USING IT.

DANGER!
THE SPRAYER SHOULD NOT BE OPENED.

WARNING!

Failure to read and follow all safety warnings and all instructions may result in electric shock, fire and injury. Save all warnings and instructions for future reference.

• Keep the work area well-lit and free from clutter to prevent accidents.
• Do not use the sprayer in the presence of flammable liquids, gases, or dust.
• Keep children and bystanders away while operating the sprayer to avoid distractions.
• Ensure that the power tool plugs match the outlet and never modify the plug.
• Avoid contact with grounded surfaces and do not expose the sprayer trainor wet conditions.
• Do not abuse the cord and keep it away from heat, oil, and sharp edges.
• Stay alert and use common sense when operating the sprayer, avoiding its use when tired or under the influence.
• Wear appropriate personal protective equipment, including eye protection and other gear as needed.
• Ensure the switch is in the off position before connecting to the power source,picking up, or carrying the tool.
• Maintain proper footing and balance while using the sprayer to have better control in unexpected situations.

CAUTION!

• PRE-USE CHECK: Before each use, ensure that the hose is securely attached the shut-off assembly. Check the tightness of all nozzle, bottle, and wand connections.
• Do not exceed a solution temperature of 120ºF / 49ºC inside the tank.
• Never attempt to open the sprayer by yourself. Opening the sprayer mayresultin damage and should only be done by authorized personnel.
• Keep the sprayer out of reach of children and pets when not in use.
• Avoid spraying towards electrical outlets, wiring, or any electrical equipment.
• Do not aim the sprayer at people or animals. Use caution to prevent accidental spray contact.
• Always follow the manufacturer’s instructions for the safe handling and storage of chemicals and solutions used with the sprayer.
• If you encounter any issues or concerns with the sprayer, discontinue use and contact customer support for assistance.
• Regularly inspect the sprayer for any signs of damage or wear. Replace Any Worn or damaged parts immediately.
• Remember to always prioritize safety when using the sprayer.

SPECIFICATION

• Model: ME-SP-2
• Rated Power: 4.8W
• Rated Voltage: 3.7V
• Rated Current: 1.3A
• Product Size: 18515550mm(7.36.12.0 in)
• Battery Type: built-in 1200mAh Lithium-Ion Battery
• Applicable Bottle Size: o/d 2.5cm (0.984’’) bottleneck (e.g. Cola/Sprite/Fanta/Pepsi etc.)

PACKING LIST – Full Set (Fig.2)

• 1 x Main Unit
• 1 x 0.3m (1-foot) Silicone Hose (for bottle use)
• 1 x 1.5m (5-foot) Silicone Hose (for bucket use)
• 1 x Short Spout
• 1 x Universal Brass Long Spout
• 2 x Filter for Pesticide (small one for bottle use; big one for bucket use)
• 1 x USB cable (adaptor is not included)
• 1 x Drip Irrigation Kit: 10m(32.8ft) PE Hose; 1pc Double-head Connector; 10pcs Dripper; 9pcs Joint (“T” connector)
  

INSTALLATION & USE

ATTENTION!

1. Use clean water for spraying. When adding water-soluble pesticide or fertilizer, ensure complete dissolution to prevent nozzle clogging.
2. When setting the timer for automatic spraying, ensure that no sensitive items are with in the spray range to avoid potential damage.
3. Do not immerse the machine in water as it may cause damage to the electronic components. Keep the sprayer dry and away from water exposure.
4. Keep the sprayer out of reach of children and pets to prevent accidental use.
5. Regularly check and clean the nozzle, filter, and hose to ensure optimal performance.

INSTRUCTIONS FOR BOTTLE USE

1. Attach the desired short or long spout to the main engine and connect thesiliconehose to the water inlet. Securely screw on a filled cola bottle for water supply. (Fig. 2)
   
   

2. Press the “On/Off” button to start the sprayer. It will automatically continues praying for 2 minutes.

3. To stop or switch off the sprayer, simply press the “On/Off” button again.

USE WITH PESTICIDE / FERTILIZER (Fig.3)

This sprayer is designed to accommodate water-soluble pesticides or fertilizers, offering additional care for your plants. It includes two types of filters for different applications:

• Small filter: For use with the 1-foot (0.3m) silicone hose and a bottle.
• Large filter: For use with the 5-foot (1.5m) silicone hose and a bucket.

Connection Steps:

1. Insert the filter into the silicone hose securely and connect the hose to the water inlet of the machine.
2. Mix the water-soluble pesticide or fertilizer with water in the bottle or bucket.
3. Attach the bottle to the machine or place the filter directly into the water-filled bucket.
   NOTE: DO NOT add pesticides or fertilizers directly into the filter. Always mix them with water in the bottle or bucket before use.This sprayer is applicable for adding water-soluble pesticide or fertilizer, which can be used for additional care for your plants.
   

HOW TO SET THE TIMER?

1. Mode 1 – 30s/12h: Press the “On/Off” button to start, then press “Timer” once to set it to automatic spray for 30 seconds per 12 hours. The LED indicator light flashes quickly. In this mode, the battery can support around 7-10 days’ spraying.
2. Mode 2 – 30s/24h : Press the “Timer” button again (based on 30s/12h) to switch the timer to spray for 30 seconds every 24 hours. The LED indicator light will flash slowly. In this mode, the battery can support approx. 14-18 days of spraying.
3. Cancel Timer: Press the “On/Off” button to cancel the timer and returntomanual spraying mode.

SPRAY VOLUME ADJUSTMENT

• Gradually twist the spout to adjust the spray volume from mist to jet, allowing you to customize the spraying intensity for various applications.

DIY DRIP IRRIGATION FUNCTION

The electric sprayer comes with a set of drip irrigation kits for DIY potted plants. Thekit includes a 32.8ft PE hose, 10pcs drippers, 9pcs T joints, and 1pc double-head connector (Fig.4). To set up the drip irrigation system, follow these steps:

1. Cut the PE hose to the appropriate length based on the location and distance between the flowerpots.
2. Insert the LARGER end of the double-headed connector into the inlet of the machine,and then insert the SMALLER end into the first hose to begin the hose connection.
3. Install a “T” joint at the other end of the first hose, connect the second hose vertically to the T-joint, and then attach an “L” dripper to the end of the hose.
4. Repeat the third step to install other “T” joints and “L” drippers until you reach the desired number for potted drip irrigation (10 drippers are provided).
5. Insert the last dripper directly into the end of the last hose to complete the loop.
6. Insert the drippers into the potted plants as desired, and set the water spray timing to either 12H/24H with 30 seconds spraying for each time.
   • Tips : If it’s difficult to insert the double-head connector into PE hose, we recommend immersing the hose in hot water for a few minutes. This will make it easier to install.
     

BATTERY CHARGING

ATTENTION

• The sprayer does not come fully charged, please charge it first before use.When the battery runs out, the sprayer will automatically stop working.
• Never attempt to open the sprayer for any reason. If sprayer is cracked or damaged, do not insert into charger. Do not crush, drop or damage the sprayer.

1. Insert the attached USB cable to the charging port of the sprayer, connect the USB interface to any USB power supply, or connect it with USB adaptor to charge the sprayer. (e.g. iPhone adaptor is applicable for this sprayer’s charging, plug the adaptor to 110V power supply is acceptable.)
2. During charging, the 2 LED lights will flash slowly; When the sprayer is fully charged, the 2 LED lights will keep lighting.
3. Always remove the connection with power supply first, then remove the connection with the sprayer to keep safe.

CLEANING & MAINTENANCE

• If the sprayer is dirty, clean it with a (slightly damp) cloth. If necessary, the housing can be cleaned with a damp cloth. Do not use corrosive cleaning agents of chemicals that can damage the material!
• Regularly check and clean water inlet and pesticide/fertilizer filter to prevent clogging.Use a wet cotton swab to remove any stuck precipitant or water scale.
• Ensure that no water remains in the hose that can freeze. Before the onset of the frost period, store the sprayer in a frost protected place.
• Store the sprayer in a cool, dry place when not in use to prolong its life span and prevent any potential damage.

WARRANTY SERVICE REGULATIONS

Blütezeit warranties this product to the original purchaser with proof of purchase,for a period of 1 YEAR against defects in materials, parts or workmanship from the date of purchase.

• 24/7 Technical Support: We offer comprehensive technical support for any issues you may encounter with our product.
• Limited Warranty for Faulty Parts: If any parts are found to be faulty within the specified time period after the date of purchase, we will provide replacements.
• Quality Issue Exchange or Return: If you experience any quality issues with our product, you can exchange or return it within 1 month from the date of purchase.
• Shipping and Freight Charges: Please note that any shipping, freight, or transportation fees associated with returns, advance replacements, or exchanges of items are not covered by Blütezeit by default.

We strive to provide excellent customer service and address any concerns you may have.Please feel free to reach out to us for assistance with our product.

Items Excluded from Warranty:

• Failures resulting from the use of improper tools or unauthorized repair procedures are not covered under warranty.
• Any damage caused by unauthorized disassembly or modification of theproduct is not covered.
• Warranty does not apply to parts or components that are not supplied by the warrant or or have been modified.
• Damage caused by improper installation, use, or connection to an inappropriate water supply is not covered.
• External factors such as fire, lightning, wind, flood, insects, or other natural agents are excluded from warranty coverage.
• Inoperative parts due to misuse, commercial use, abuse, neglect, accidents, improper maintenance, or alteration are not covered.
• The warranty is void if the product is not operated and maintained correctly as instructed in the user manual.
• Normal wear and tear, as well as routine maintenance items like lubricants or deterioration of the exterior finish due to regular use or exposure, are not covered by warranty.

Need More Help?

We apologize for any inconvenience. Customer satisfaction is our NO.1 priority and if any mailing damage or different than what’s you expect, please allow our helpful customer service team to improve your experience right away, our team members are more than happy to help. Feel free to contact us via bluetezeit.service@outlook.com or Amazon message, please send pictures/ video that can show the problem along with your order# to us, we will help you solve the problem shortly.

Bring you more conveniences.

Documents / Resources

| Blutezeit ME-SP-2 Cordless Electric Sprayer [pdf] User Manual
ME-SP-2 Cordless Electric Sprayer, ME-SP-2, Cordless Electric Sprayer, Electric Sprayer, Sprayer
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>