2Pack J68 Professional Wireless Lavalier Microphone User Manual

2Pack J68 Professional Wireless Lavalier Microphone User Manual

Introduction

Thanks for choosing our product. This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in online live broadcast, video Vlog shooting, program interview, recording, video teaching and other occasions. This product consists of three parts: charging box, microphone transmitter and receiver (as shown in the figure below, some models have no charging box, Based on the actual object)

ID Diagram

1. Windproof Net
2. Connection indicator light
3. Mute indicator light
4. Noise reduction indicator light
5. Battery indicator
6. Microphone Type-c charging port
7. Microphone clip
8. Key 1
9. Key 2
10. Mobile interface
11. Right indicator light
12. Left indicator light
13. Receiver charging port
14. Charging box Type-C charging port
15. Charging box indicator
    

How to use

Step 1: Connect the receiver to phone with port.

Note: oppo/ vivo/iqoo/realm brand mobile phones can be used normally only when they go to the settings (search “OTG” – turn on OTG power supply)

Step 2: Long press button 1 for 3 seconds, or remove it from the box. The connection indicator light will slowly flash green, indicating successful startup.

Step 3: The indicator lights of the receiver and transmitter are always on, and the mobile phone turns on the camera for live broadcast Video and other APP can use microphone to pick up sound.

Special Note:
For the use of port: there is no battery in receiver, and no need to recharge during live. If the phone is low power during Live, it can be recharged directly through port.

About Ul

Microphone Transmitter

flashing slowly
Power off| Long press the 3S button K1| All the lights went out
Unconnected| | Connection indicator light green flashing slowly
Connected| Automatic pairing pairing pairing name: N9125| The connection indicator light remains on
Noise reduction/ acoustic switching| Click button K2 to turn off/on noise reduction| Off: Noise reduction indicator light off
On: Noise reduction indicator light on
Reverberation| Double click button K2 to turn reverb on/off| Off: The noise reduction indicator light flashes green slowly onceOn: The noise reduction indicator light slowly flashes green three times
Silent mode| Double click button K1 to pause/resume recording| Off: Mute indicator light off
On: Mute indicator light on
Power display| | 40% -100% battery: The battery indicator light is green and always on20% -40% battery level: The battery indicator light is yellow and constantly on10% -20% battery level: The battery indicator light is red and always onBelow 10%: The battery indicator light flashes red once every 10 seconds
Charging| | Charging: 10% -20% battery indicator light, red light always onCharging: 20% -99% battery indicator light, yellow light always onCharging: 100% battery indicator light, all lights off

Note: Remove from the charging compartment and automatically start the machine. Automatically shut down if there is no connection for more than three minutes. By default, the noise reduction and reverb functions are turned on when turned on.

Receiver

flash simultaneously
Connect a transmitter| | Left light remains on, right light 2 flashes
Connect two transmitters| | Both the left and right lights are constantly on at the same time

Charging BOX

Power display: The four lights from left to right indicate 25%, 50%, 75% and 100% of the power. The four lights on represent 100% of the power. Each 25% reduction in power will turn off one light.
Discharge state: The digital display light in the charging compartment is constantly on, and when the transmitter is fully charged, the digital display light goes out.
State of charge: The adapter charging cable is inserted into the Type-C port of the charging bin, and the current battery indicator flashes, and the indicator lights up when it is fully charged.

Packing List

Content of packing

1. Microphone transmitter
2. Lightning receiver
3. Charging box
4. Charging cable
5. User manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>