DigitalLife 2I1O Midi Merger User Guide

DigitalLife 2I1O Midi Merger

Product Information

• Product Name:
  • MERGE-II MIDI MERGER
• User Guidance:
  • Version:v1.0
• Package Contents:
  • MIDI 2i/1o MERGE BOX
  • Quick Instructions
• Specifications:
  • 2 input and 1 output MIDI ports
  • Supports 5-pin MIDI cables
  • USB A to B cable for power supply (no data transfer function)
• User Guidance:
  • Copying or reproduction of this document in whole or in part without permission is prohibited.

Product Usage Instructions

• A. Hardware Review:
  • The MERGE-II MIDI Merger has the following hardware components:
• Power In – Power supply interface
  • IN B – MIDI input port
  • IN A – MIDI input port
  • OUT – MIDI output port
• Hardware Installation:
  • Connect the MIDI cables to the IN A/B ports of the MERGE-II.
  • Connect a MIDI cable to the OUT port of the MERGE-II.
  • Power on the MERGE-II using the included USB A to B cable (for power supply only, no data transfer function).
• Frequently Asked Questions (FAQ)
  • Q: What cables do I need to use with the MERGE-II MIDI Merger?
  • A: You will need 5-pin MIDI cables to connect MIDI devices with 5-pin MIDI ports to the MERGE-II. Ensure that the MIDI cables are of good quality and firmly connected to avoid signal loss or disconnection during use.
  • Q: Can I copy or reproduce the user manual without permission?
  • A: No, copying or reproduction of the user manual in whole or in part without permission is prohibited.

PACKAGE CONTENTS

1. MIDI 2i/1o MERGE BOX
2. Quick Instructions

To use the MIDI MERGE-II, you may need to prepare 5-pin MIDI cables. These cables are used to connect MIDI devices with 5-pin MIDI ports to the MERGE-II. It is important to ensure that the MIDI cables are of good quality and are firmly connected to the MIDI devices and the MERGE-II to avoid signal loss or disconnection during use.

HARDWARE REVIEW

1. Power In – Power Supply Interface
2. IN B – MIDI Input Socket
3. IN A – MIDI Input Socket
4. OUT – MIDI Output Socket

HARDWARE INSTALLATION

1. Connect MIDI Cables into IN A/B.
2. Connect MIDI Cable into OUT.
3. Power On MERGE-II with Included USB
   • A to B Cable ( Power Supply Only. It has no Data Transfer Function.)

www.digitallife.shop.

Copying or reproduction of this document in whole or in part without permission is prohibited.

• Version: v1.0

Technical Support

https://www.digitallife.shop/products/merge-ii.

CONTACT

• | EU | REP | AMZLAB GmbH
• Laubenhof 23, 45326 Essen, Germany
• | UK | REP | APEX CE SPECIALISTS LIMITED
• 89 Princess Street, Manchester, M1 4HT, UK
• EMC Information
• FEDERAL COMMUNICATIONS
• COMMISSION INTERFERENCE
• WEEE-Reg.-Nr. DE 96686822
• Made In P.R.C
• www.digitallife.shop.

References

• DigitalLife MERGE-II 2i/1o MIDI Merge Box - 5-Pin DIN MIDI Interface

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>