UYF M4-BS2-U Keyless Entry Door Lock with Lever User Manual

USER MANUAL
Smart Door Lock

M4-BS2-U Keyless Entry Door Lock with Lever

M4-BS2-U/M4-S$2-U 2.0

PREFACE
Please read this manual before installing.
Any question, please contact our customer service.
WARNING:
This Manufacturer advises that no lock can provide complete security by itself.
This lock may be defeated by forcible or technical means, or evaded by entry elsewhere on the property.
No lock can substitute for caution, awareness of your environment and common sense.
In order to enhance security and reduce risk, you should consult qualified locksmith or other security professional.
Please Note:
L/R side door has different install method, please follow the tips in the manual.
Warranty & After-sale Service:
We provide one year warranty and free life-time tech support. Any question please feel free to contact us.

Parts Identification

How to Install the Lock

1. Measure the Door Size
   Make sure door thickness is 1.49-1.88″, door hole diameter is 2-1/8″, measure backset size is 2-3/8″ or 2-3/4″ with the deadbolt.

2. Adjust the Length of the Deadbolt
   Adjust the deadbolt to 2-3/8″ or 2-3/4″ based on your door backset size.

3. Install Deadbolt
   Fix the deadbolt with 2pcs deadbolt screws, keep the deadbolt in retracted status.

4. Install Exterior Lock
   Route the IC cable below the deadbolt, spindle must be in ‘vertical’ status.Route the IC cable below the deadbolt.
   NOTE: Do not inert the key during the installation.
   NOTE: Spindle must be in unlock position and the spindle must be in ‘vertical’ status.

5. Fix the Mounting Plate
   a. Route the cable through the hole in the mounting plate, word with’ Cable Hole’ should face outside.
   b. Fix the plate with 2pcs mounting plate screws.

6. Install the Interior Lock
   a. Connect the IC cable tightly.
   b. Rotate the door knob in vertical position and insert the spindle.(Don’t load batteries until lock is completely installed)

7. Fix Interior Lock
   a. Secure the lock with 3pcs interior lock skews.
   b. Test the lock by rotating the door knob to see if the deadbolt can be extended and retracted smoothly.

8. Install Batteries
   Please install 4 pcs AA batteries in unlock status and keep the door open to avoid being locked out.

Detect Left/Right Hand Door

Set left/right hand door on keypad

The most important step is to adjust the code to the direction of the door.
How to know your door door direction?
Standing outside of your door (Facing the keypad),locate the door hinge.
If your door hinge is on the left side, Keyboard input 46#➔
Default Administrator Password”123456″#➔1# (L)
If your door hinge is on the right side, Keyboard input 46#➔
Default Administrator Password”123456″ #->2# (R)
NOTE: The default administrator passcode is 123456

How to Reset the Lock

Reset method 1.(Recommend)

1. Take down one battery and wait for 5 seconds.
2. Put the battery back.
3. Long press the reset button for 10s while the keypad lighting up.
4. After hearing “Please input the initialization password”, enter 000#.
5.  After hearing “Administrator deleted successfully”, reset successfully.
   NOTE: If method 1 doesn’t work ,please try method 2 or contact customer service for help.

Reset method 2.
(1)Uninstall the lock by taking down the battery cover. Take out the 2 screws inside the battery case.
(2)Make sure the IC wire is connected and install the batteries back to case.
(2) Hold the Reset Button (The position is shown below)for 5s.(You’ll hear the sound” input initialization passcode” from the lock)

(3) Input 000# on the keypad after the sound. (You’ll hear “Administrator deleted successfully”, which means reset successfully.)
NOTE: If this method doesn’t work too, please contact customer service.

How to Use

Your lock is now installed! Let’s learn to use it!
Unlock the door from outside ![UYF M4 BS2 U Keyless Entry Door Lock with Lever

• Use](https://manuals.plus/wp-content/uploads/2023/11/UYF-M4-BS2-U-Keyless- Entry-Door-Lock-with-Lever-Use.png)

Unlock the door from inside ![UYF M4 BS2 U Keyless Entry Door Lock with Lever

• xterior Lock 4](https://manuals.plus/wp-content/uploads/2023/11/UYF-M4-BS2-U -Keyless-Entry-Door-Lock-with-Lever-xterior-Lock-4.png)

Lock the door from outside

1. Hold “#” on the keypad for 2S.
2. ln auto lock mode, the bolt will extend out automatically
3. Lock with physical keys

Lock the door from inside
Rotate the turn piece to lock position.

Now let’s start to use it!

Let’s set an administrator passcode. please make sure you will remember the code as you will need to use it when edit any setting.
Set an Administrator Passcode
Please input[#]on the keypad, go to the voice navigation menu.
Please set a 4 to 9 digits administrator passcode and press hash key to confirm.
Please input again and press hash key to confirm
Administrator Add Successfully
Now you have your own administrator passcode.

Quick Guide

Lock Function Menu Detail

*#
(Menu)| Manage
Passcode| Add a passcode| |
---|---|---|---|---
Change the passcode| |
Changing the Administrator Passcode| |
Delete passcodes| |
Manage Card| Add a card| |
Delete the card| |
Manage
Settings| Sound Setting| Turn off sound| Turn on sound
Auto lock Setting| Disable auto lock| Enable auto lock

The default admin code is 123456.lt’s required that you set up a new admin code before programming.
Please press asterisk * to return to the upper menu.
NOTE: All codes you set must be 4-9 digits.=

Detail Setting

1. Passcode Setting
   Please input[*#]on the keypad, input administrator passcode to go to the voice navigation menu. Then press [1] to manage passcode.
   After that, please press[1] to add passcode, press [2 ]to edit passcode, press [3]to edit administrator passcode, press [4]to delete passcode.

2. Add a New Passcode
   Please input[*#]on the keypad, input administrator passcode to go to the voice navigation menu.
   Listen to the voice prompt and input[1] go to manage passcode and then press [1]to add passcode. Please input a 4 to 9 digits new passcode, press hash key to confirm.
   Please input passcode again to confirm.
   Passcode add successfully.

3. Change Old Passcode
   Please input[*#]on the keypad input administrator passcode to go to the voice navigation menu.
   Listen to the voice prompt and input[1] go to manage passcode and then press [2]to edit passcode.
   Please input the original passcode, press hash key to confirm Please input a 4 to 9 digits new passcode, press hash key to confirm.
   Please input new codes again, press hash key to confirm Operation successfully.

4. Change the Administrator Passcode
   Please input[*#]and your [administrator passcode]go to  the voice navigation menu.
   Listen to the voice prompt and input[1] go to manage passcode and then press [3]to edit administrator passcode.
   Please input 4 to 9 digits new administrator passcode, press hash key to confirm.
   Please input your new passcode again, press hash key to confirm
   Administrator Passcode change successfully.

5. Delete Passcode
   Please input[*#]and your
   [administrator passcode]go to the voice navigation menu.
   Listen to the voice prompt and input[1] go to manage passcode and then press [4]to delete passcode.
   Please input the [passcode to be deleted], press hash key to confirm or enter [00]and hash key to delete all passcodes  Please input again, press hash key to confirm.
   Operation successfully.

6. Card Setting
   Please input[*#]and your [administrator passcode]go to the voice navigation menu.
   Then press [2] to to the card Management menu.
   After that, please press[1] to add card, press [2 ]to delete card.

7. Add Card
   Please input[*#]and your [administrator passcode]go to the voice navigation menu.
   Listen to the voice prompt and input [2]go to the card Management menu.
   Please press[1] to add card.
   Please hold the card close to the door lock and swipe your card Card add successfully.

8. Delete the Card
   Please input[*#]and your [administrator passcode]go to the voice navigation menu. Listen to the voice prompt and input[2]to to the card Management menu.
   Please press[2] to delete card Please swipe your card, Or enter 00 and hash key To delete all cards.
   Take out the entry card close to the door lock.
   Card delete successfully.

9. Normally Open Mode
   After successful electronic lock opening, enter 123# before automatic lock closing (electronic lock opening/closing once again to remove temporary normal open).

10. Password Error Protection
    If the password, or IC card fails to be authenticated for five consecutive times, the system is locked up for two minutes (after a power failure for more than 3 seconds, the system can be unlocked by powering on the system again.

11. Low Battery Alert
    When the battery is low (lower than 4.8V), the keyboard is woken up or the system prompts you to replace the battery when the battery is low, and the keyboard blinks for 1 second.

12. Power Calibration
    Replace a new set of batteries, enter *59# administrator password #1# on the keyboard.

Virtual password: 16 characters Mechanical key: 3pcs IC: 2 PCS Standby power supply: Type-C

Troubleshooting

1. Installation
   Questions| Answers
   ---|---
   There is a gap between the mounting  plate and the door.| Please make sure that the plate with word’ Cable Hole’ should face outside.
   Keypad not responding.| A: Please make sure that the batteries are new and installed correctly.
   B: Please make sure that the Ic cable is well connected to the port and was not damaged during installation.
   The rear knob can be unlocked only  after the key is inserted.| Please remove the lock and reinstall it.
   Do not insert the key during installation
2.  Operation
   Questions| Answers
   ---|---
   After replace the new battery, the lock  still prompts low battery.| Enter *59#Administrator Passwoed#1# on the keypad to calibrate.
   Forgot administrator password.| Please refer to reset steps in order to erase all passcodes. Once the reset is complete, all  passcodes will be erased and administrator password is 123456, press# to confirm.
   The auto lock does not work.| Please active auto lock function once by
   unlock the lock after set up on keypad.
   The battery power runs out.| Use Type-C cable connecting power bank could charge the lock for temporary (only for emergency use)
   How many different passcodes/lc  cards can I set?| Please kindly note that you can only set one admin passcode, but you can generate 250 guest passwords/1000 IC cards.
   What should I do if the wrong code  was entered?| If wrong codes have been entered over 5 times, the keypad will temporary lockout for 2 minutes
   How to lock/unlock via keypad?| Long press”#” and hold for 2s to lock the door. Enter the passcode and press”#” to unlock the door.
   What is the initial code while resetting?| The initial code is “000”. Please enter “000”and press”#” on the keypad so you could reset successfully.
   Can I use one IC card to match  different door locks?| Yes, you can use one IC Card to match different door locks.
   Lock could not turn, doesn’t work,  what should I do?| 1.Please check if door knob shows vertical when unlock, horizontal when lock.
   If not, please uninstall the lock and adjust spindle to vertical during installation.
   2.Please check your door directions, please adjust your door directions based on door hinge.(Please face the  keypad and find the door hinge)
   If your door hinge is on the left side, please input 46# on keypad > Default Administrator Password”123456″# >1# (L)
   If your door hinge is on the right side, please input 46# on keypad > Default Administrator Password”123456″ # >2# (R)
   What to do if you have
   any other questions?| Please feel free to contact customer service,
   your satisfactory is our priority.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>