Sony Cyber-Shot DSC-W560 14.1 MP Digital Still Camera Instruction Manual

Sony Cyber-Shot DSC-W560 14.1 MP Digital Still Camera

Owner’s Record

The model and serial numbers are located at the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product.

• Model No. DSC-W560
• Serial No. __

WARNING

To reduce fire or shock hazards, do not expose the unit to rain or moisture.

IMPORTANT SAFETY INSTRUCTIONS -SAVE THESE INSTRUCTIONS DANGER. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.

CAUTION

Battery pack

• If the battery pack is mishandled, the battery pack can burst, cause a fire, or even chemical burns. Observe the following cautions.
• Do not disassemble.
• Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping, or stepping on it.
• Do not short-circuit and do not allow metal objects to come into contact with the battery terminals.
• Do not expose to high temperatures above 60°C (140°F) such as in direct sunlight or a car parked in the sun.
• Do not incinerate or dispose of in a fire.
• Do not handle damaged or leaking lithium ion batteries.
• Be sure to charge the battery pack using a genuine Sony battery charger or a device that can charge the battery pack.
• Keep the battery pack out of the reach of small children.
• Keep the battery pack dry.
• Replace only with the same or equivalent type recommended by Sony.
• Dispose of used battery packs promptly as described in the instructions.

Battery charger

Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

For Customers in the U.S.A. and Canada

RECYCLING LITHIUM-ION BATTERIES

The Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

Battery pack

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

For Customers in the U.S.A.

UL is an internationally recognized safety organization. The UL Mark on the product means it has been UL-listed. If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY (7669). The number below is for FCC-related matters only.

Regulatory Information

Declaration of Conformity

• Trade Name: SONY
• Model No.: DSC-W560
• Responsible Party: Sony Electronics Inc.
• Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A.
• Telephone No.: 858-942-2230

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

For Customers in Europe

Notice for the customers in the countries applying EU Directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).

Attention
The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.

Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or its packaging indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling this product, please contact your local Civic Office, your household waste disposal service, or the shop where you purchased the product.

Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)

This symbol on the battery or the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries, this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead.

By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources.

In case of products that for safety, performance, or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment.

For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling this product or battery, please contact your local Civic Office, your household waste disposal service, or the shop where you purchased the product.

Notice for customers in the United Kingdom

A molded plug complying with BS 1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

Refer to “Cyber-shot Handbook” (PDF) on supplied CD-ROM

For details on advanced operations, please read the “Cyber-shot Handbook” (PDF) on the CD-ROM (supplied) using a computer.

For Windows users:

1. Click [Handbook] t [Install].
2. Start “Handbook” from the shortcut on the desktop.

For Macintosh users:

1. Select the [Handbook] folder and copy “Handbook.pdf” stored in the [GB] folder to your computer.
2. After copying is complete, double-click “Handbook.pdf”.

Checking the accessories supplied

• Battery charger BC-CSN/BC-CSNB (1)
• Power cord (mains lead) (not supplied in the USA and Canada) (1)
• Rechargeable battery pack NP-BN1 (1)
• USB, A/V cable for multi-use terminal (1)
• Wrist strap (1)
• CD-ROM (1)
  • Cyber-shot application software
  • “Cyber-shot Handbook”
• Instruction Manual (this manual) (1)

Identifying parts

1. ON/OFF (Power) button

2. Shutter button

3. Flash

4. Self-timer lamp/Smile Shutter
   lamp/AF illuminator

5. Lens

6.  Microphone

7. LCD screen

8. For shooting: W/T (Zoom) button
   For viewing: (Playback zoom) button/ (Index) button

9. Mode switch

10. Hook for wrist strap

11. (Playback) button

12. (In-Camera Guide/Delete) button

13. MENU button

14. Control button
    Menu on:
    Menu off:

15. Speaker

16. Tripod receptacle
    • Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to  the camera may occur

17. Battery/memory card cover

18. Memory card slot

19. Access lamp

20. Multi connector (Type3a)

21. Battery insertion slot

22. Battery eject lever

Charging the battery pack

For customers in the USA and Canada and customers in countries/regions other than the USA and Canada

1. Insert the battery pack into the battery charger.
   • You can charge the battery even when it is partially charged.

2. Connect the battery charger to the wall outlet (wall socket).
   • If you continue charging the battery pack for about one more hour after the CHARGE lamp turns off, the charge will last slightly longer (full charge).

Charging time

Full charge time: approx. 245 min.
Normal charge time: approx. 185 min.

• The above charging times apply when charging a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer depending on conditions of use and circumstances.
• Connect the battery charger to the nearest wall outlet (wall socket).
• When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger.
• Be sure to use the battery pack or the battery charger of the genuine Sony brand.

Battery life and number of images you can record/view

| Battery life| Number of images
---|---|---
Shooting (still images)| Approx. 115 min.| Approx. 230 images
Viewing (still images)| Approx. 260 min.| Approx. 5200 images
Shooting (movies)| Approx. 80 min.| —

Notes

The number of images that can be recorded is an approximate number when shooting with a fully charged battery pack. The number may be less depending on the circumstances.

• The number of images that can be recorded is when shooting under the following conditions:
  • Using Sony “Memory Stick PRO Duo” (Mark2) media (sold separately).
• Then a fully charged battery pack (supplied) is used at an ambient temperature of 25°C (77°F).
• The number of still images that can be recorded is based on the CIPA standard and is for shooting under the following conditions. (CIPA: Camera & Imaging Products Association)
  • DISP (Screen Display Settings) is set to [Normal].
  • Shooting once every 30 seconds.
  • The zoom is switched alternately between the W and T ends.
  • The flash strobes once every two times.
  • The power turns on and off once every ten times.
• The battery life for movies is when shooting under the following conditions:
  • Recording mode: 720 FINE
  • When continuous shooting ends because of set limits (page 19), press the shutter button down again and continue shooting. Shooting functions such as Zoom do not operate.

Inserting the battery pack/a memory card (sold separately)

1. Open the cover.

2. Insert the memory card (sold separately).
   • With the notched corner facing down as illustrated, insert the memory card until it clicks into place.

3. Insert the battery pack.
   • While pressing the battery eject lever, insert the battery pack as illustrated. Make sure that the battery ejects lever locks after insertion.

4. Close the cover.
   • Closing the cover with the battery inserted incorrectly may damage the camera.

Memory cards that you can use

| Memory card| For still images| For movies
---|---|---|---

A

| Memory Stick PRO Duo| a| a
Memory Stick PRO-HG Duo| a| a
Memory Stick Duo| a| —

B

| SD memory card| a| a
SDHC memory card| a| a
SDXC memory card| a| a

• In this manual, products in A are collectively referred to as “Memory Stick Duo” media.
• In this manual, products in B are collectively referred to as SD cards.
• When recording movies, it is recommended that you use Mark2 “Memory Stick Duo” media and Class 4 or faster SD cards.

To remove the memory card/battery pack

• Memory card: Push the memory card in once.
• Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.

Note

Never remove the memory card/battery pack when the access lamp (page 8) is lit. This may cause damage to data in the memory card/internal memory.

Setting the clock

1. Press the ON/OFF (Power) button.
   The date and time setting is displayed when you press the ON/OFF (Power) button for the first time.
   • It may take time for the power to turn on and allow operation.

2. Set [Date & Time Format], [Daylight Savings], and [Date & Time], then press [OK].
   • Midnight is indicated as midnight and noon as noon.

3. Select the desired area following the instructions on the screen, then press .

4. Select the desired display color and display resolution mode, following the instructions on the screen.

5. When an [In-Camera Guide] introductory message appears on the screen, press [OK].

Shooting still images/movies

Shooting still images

1. Press the shutter button halfway down to focus.
   • When the image is in focus, a beep sounds, and the indicator lights. Press the shutter button fully down.

Shooting movies

1. Press the shutter button fully down to start recording.
   • Use the zoom button to change the zoom scale.
2. Press the shutter button fully down again to stop recording.

Notes

• The operating sound of the lens is recorded when the zoom function operates while shooting a movie.
• You can shoot continuously for approximately 29 minutes at a time when the temperature is 25°C (77°F) and the camera is set to the factory settings. When shooting stops, you can press the shutter button again to restart shooting. Depending on the temperature when shooting, recording may automatically stop to protect the camera.

Viewing images

1. Press the (Playback) button.
   • When images on a memory card recorded with other cameras are played back on this camera, the registration screen for the data file appears.

Selecting the next/previous image
Select an image with (next) / (previous) on the control button. Press in the center of the control button to view movies.

Deleting an image

1. Press the (Delete) button.
2. Select [This Image] with a stop on the control button, then press .

Returning to shooting images
Press the shutter button halfway down.

In-Camera Guide

This camera contains an internal function guide. This allows you to search the camera’s functions according to your needs.

1. Press the (In-Camera Guide) button.
   • When viewing images, [Delete/In-Camera Guide] is displayed. Select [In- Camera Guide].

2. Select a search method from [In-Camera Guide].
   Shoot/playback guide: Search for various operation functions in shooting/viewing mode.
   Icon guide: Search the function and meaning of displayed icons.
   Troubleshooting: Search common problems and their solution.
   Objective guide: Search functions according to your needs.
   Keyword: Search functions by keywords.
   History: Display the last 12 items displayed in [In-Camera Guide].

Introduction of other functions

Other functions used when shooting or playing back can be operated using the Control button or MENU button on the camera. This camera is equipped with a Function Guide that allows you to easily select from the functions. While displaying the guide, try the other functions.

Control button

Menu Items

Shooting

Panorama mode when shooting panoramic images.
Shooting Direction| Set the direction to pan the camera when shooting Sweep Panorama images.
Image Size/ Panorama Image Size| Select the image size for still images, panoramic images or movie files.
Burst Settings| Select single-image mode or burst mode.
---|---
EV| Adjust the exposure manually.
ISO| Adjust the luminous sensitivity.
White Balance| Adjust color tones of an image.
Underwater White Balance| Adjust the color tones of an image shot underwater.
Focus| Select the focus method.
Metering Mode| Select the metering mode that sets which part of the subject to measure to determine the exposure.
Scene Recognition| Set to automatically detect shooting conditions in Intelligent Auto mode.
Soft Skin Effect| Set the Soft Skin Effect and the effect level.
Smile Detection Sensitivity| Set the Smile Shutter function sensitivity for detecting smiles.
Face Detection| Select to detect faces and adjust various settings automatically.
DRO| Set DRO function to correct the brightness and contrast and improve the image quality.
Anti Blink| Set to automatically shoot two images and select image in which the eyes are not blinking.
In-Camera Guide| Search the camera’s functions according to your needs.

Viewing

Easy Mode| Set the text-size increases and all indicators become easier to see.
---|---
Slideshow| Select a method of continuous playback.
View Mode| Select the display format for images.
Retouch| Retouch an image using various effects.
Delete| Delete an image.
Protect| Protect the images.
DPOF| Add a print order mark to a still image.
Rotate| Rotate a still image to the left or right.

Setting items

If you press the MENU button while shooting or during playback, (Settings) is provided as a final selection. You can change the default settings on the (Settings) screen.  If a memory card is not inserted, (Internal Memory Tool) will be displayed and only [Format] and [File Number] can be selected.

If a memory card is not inserted, (Internal Memory Tool) will be displayed and only [Format] and [File Number] can be selected.

Number of still images and recordable time of movies

The number of still images and recordable time may vary depending on the shooting conditions and the memory card.

Still images

Movies

The table below shows the approximate maximum recording times. These are the total times for all movie files. Continuous shooting is possible for approximately 29 minutes. The maximum size of a movie file is up to approximately 2 GB.

The number in ( ) is the minimum recordable time.

• The recordable time of movies varies because the camera is equipped with VBR (Variable Bit Rate), which automatically adjusts image quality depending on the shooting scene. When you record a fast-moving subject, the image is clearer but the recordable time is shorter because more memory is required for recording. The recordable time also varies depending on the shooting conditions, the subject, or the image size settings.

Notes on using the camera

Changing the language setting
To change the language setting,press .

On use and care
Avoid rough handling, disassembling, modifying, physical shock, or impact such as
hammering, dropping, or stepping on the product. Be particularly careful of the lens.
Notes on recording/playback

• Before you start recording, make a trial recording to make sure that the camera is working correctly.
• The camera is neither dust-proof, nor splash-proof, nor water-proof.
• Avoid exposing the camera to water. If water enters inside the camera, a malfunction may occur. In some cases, the camera cannot be repaired.
• Do not aim the camera at the sun or other bright light. It may cause the malfunction of the camera.
• If moisture condensation occurs, remove it before using the camera.
• Do not shake or strike the camera. It may cause a malfunction and you may not be able to record images. Furthermore, the recording media may become unusable or image data may be damaged.

Do not use/store the camera in the following places

• In an extremely hot, cold or humid place
  In places such as in a car parked in the sun, the camera body may become deformed and this may cause a malfunction.

• Under direct sunlight or near a heater The camera body may become discolored or deformed, and this may cause a malfunction.

• In a location subject to rocking vibration

• Near a location that generates strong radio waves, emits radiation or is strongly magnetic place. Otherwise, the camera may not properly record or play back images.

• In sandy or dusty places
  Be careful not to let sand or dust get into the camera. This may cause the camera to malfunction, and in some cases this malfunction cannot be repaired.

On carrying
Do not sit down in a chair or other place with the camera in the back pocket of your trousers or skirt, as this may cause malfunction or damage the camera.

Carl Zeiss lens
The camera is equipped with a Carl Zeiss lens which is capable of reproducing sharp images with excellent contrast. The lens for the camera has been produced under a quality assurance system certified by Carl Zeiss in accordance with the quality standards of Carl Zeiss in Germany.

Notes on the LCD screen and lens
The LCD screen is manufactured using extremely high-precision technology so over 99.99% of the pixels are operational for effective use. However, some tiny black and/or bright dots (white, red, blue or green) may appear on the LCD screen. These dots are a normal result of the manufacturing process, and do not affect the recording.

On camera’s temperature
Your camera and battery may get warm due to continuous use, but it is not a malfunction.

On the overheat protection
Depending on the camera and battery temperature, you may be unable to record movies or the power may turn off automatically to protect the camera. A message will be displayed on the LCD screen before the power turns off or you can no longer record movies.

Warning on copyright
Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.

No compensation for damaged content or recording failure
Sony cannot compensate for failure to record or loss or damage of recorded content due to a malfunction of the camera or recording media, etc.

Cleaning the camera surface
Clean the camera surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth.

To prevent damage to the finish or casing:

• Do not expose the camera to chemical products such as thinner, benzine, alcohol, disposable cloths, insect repellent, sunscreen or insecticide.

Specifications

Camera

[System]

• Image device: 7.76 mm (1/2.3 type) color CCD, Primary color filter

• Total pixel number of camera:
  Approx. 14.5 Megapixels

• Effective pixel number of camera:
  Approx. 14.1 Megapixels

• Lens: Carl Zeiss Vario-Tessar 4× zoom lens

  • f = 4.7 mm – 18.8 mm (26 mm – 105 mm (35 mm film equivalent)) F2.7 (W) – F5.7 (T)
  • While shooting movies (16:9): 30 mm – 122 mm
  • While shooting movies (4:3): 37 mm – 149 mm

• Exposure control: Automatic exposure, Scene Selection (11 modes)

• White balance: Automatic, Daylight, Cloudy, Fluorescent 1/2/3, Incandescent, Flash, One Push

• Underwater White Balance: Auto, Underwater 1/2, One Push

• Recording interval for Burst mode:

  • Approx. 0.87 second

• File format:

  • Still images: JPEG (DCF Ver. 2.0, Exif Ver. 2.3, MPF Baseline) compliant, DPOF compatible
  • Movies: MPEG-4 Visual

• Recording media:

  • Internal Memory (Approx. 27 MB), “Memory Stick Duo” media, SD cards

• Flash: Flash range (ISO sensitivity)

  • (Recommended Exposure Index) set to Auto):
  • Approx. 0.2 m to 3.8 m (W) (7 7/8 inches to 12 feet 5 5/8 inches)
  • Approx. 0.6 m to 1.9 m (T) (1 feet 11 5/8 inches to 6 feet 2 7/8 inches)

[Input and Output connectors]

• Multi use terminal: Type3a
  • (AV-out (SD/HD Component)/USB/DC-in):
  • Video output
  • Audio output (Monaural)
  • USB communication
• USB communication:
  Hi-Speed USB (USB 2.0)

[LCD screen]

• LCD panel: 7.5 cm (3.0 type) TFT drive
• Total number of dots: 230 400 (960 × 240) dots

[Power, general]

• Power: Rechargeable battery pack NP-BN1, 3.6 V AC-LS5 AC Adaptor (sold separately), 4.2 V
• Power consumption (during shooting): 1.1 W
• Operating temperature: 0°C to 40°C (32°F to 104°F)
• Storage temperature: –20°C to +60°C (–4°F to +140°F)
• Dimensions (CIPA compliant): 94.0 mm × 56.1 mm × 19.4 mm (3 3/4 inches × 2 1/4 inches × 25/32 inches) (W/H/D)

Mass (CIPA compliant) (including NP-BN1 battery pack, “Memory Stick Duo” media): Approx. 126 g (4.4 oz)

• Microphone: Monaural
• Speaker: Monaural
• Exif Print: Compatible
• PRINT Image Matching III: Compatible

BC-CSN/BC-CSNB battery charger

• Power requirements: AC 100 V to 240 V, 50 Hz/60 Hz, 2 W
• Output voltage: DC 4.2 V, 0.25 A
• Operating temperature: 0°C to 40°C (32°F to 104°F)
• Storage temperature: –20°C to +60°C (–4°F to +140°F)
• Dimensions:
  • Approx. 55 mm × 24 mm × 83 mm (2 1/4 inches × 31/32 inches × 3 3/8 inches) (W/H/D)
  • Mass: Approx. 55 g (1.9 oz) Rechargeable battery pack NP-BN1
• Used battery: Lithium-ion battery
• Maximum voltage: DC 4.2 V
• Nominal voltage: DC 3.6 V
• Maximum charge voltage: DC 4.2 V
• Maximum charge current: 0.9 A
• Capacity: typical: 2.3 Wh (630 mAh)
• Minimum: 2.2 Wh (600 mAh) Design and specifications are subject to change without notice.

Trademarks

• The following marks are trademarks of Sony Corporation. , “Cyber-shot,”
  “Memory Stick PRO Duo,”
  “Memory Stick PRO-HG Duo,”
  “Memory Stick Duo”

• Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.

• Macintosh is a registered trademark of Apple Inc.

• SDXC logo is a trademark of SD-3C, LLC.

• In addition, system and product names used in this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers. However, the ™ or ® marks are not used in all cases in this manual.

Additional information on this product and answers to frequently asked questions can be found on our Customer Support Website.

http://www.sony.net/

Printed on 70% or more recycled paper using VOC (Volatile Organic Compound)-free vegetable oil-based ink.

FAQs

What is the Sony Cyber-Shot DSC-W560 14.1 MP Digital Still Camera?

The Sony Cyber-Shot DSC-W560 is a 14.1-megapixel digital still camera known for its compact design, ease of use, and quality still photography capabilities.

What type of image sensor does this camera use?

The camera is equipped with a 1/2.3-inch Super HAD CCD image sensor, allowing you to capture 14.1-megapixel images with detail.

What is the maximum optical zoom range of the lens on this camera?

The Sony DSC-W560 features a 4x optical zoom lens, enabling you to zoom in on subjects with clarity.

Does this camera offer image stabilization to reduce camera shake?

The camera may offer SteadyShot image stabilization to help reduce the effects of camera shake, particularly when shooting at longer zoom ranges.

Is there a manual exposure mode for advanced photographers?

The Sony DSC-W560 primarily offers automatic shooting modes and may not provide full manual exposure control. It is designed to be user-friendly.

What is the maximum ISO sensitivity of this camera?

The camera has a maximum ISO sensitivity of ISO 3200, which can be useful in low-light situations but may result in increased noise at higher ISO settings.

Can I capture videos with this camera?

Yes, the camera allows you to capture videos at various resolutions, including standard definition (SD), making it suitable for recording video clips.

What type of memory card does the Sony DSC-W560 use?

The camera typically uses SD, SDHC, and SDXC memory cards for storing photos and videos.

Is the camera suitable for macro photography?

Yes, the camera features a macro mode, allowing you to capture close-up shots of small subjects with detail.

What is the battery life of the Sony DSC-W560 camera?

Battery life can vary based on usage, but it is generally capable of capturing a significant number of photos on a single charge.

Does it have a built-in flash for low-light photography?

Yes, the camera is equipped with a built-in flash to provide additional illumination in low-light conditions.

Is there a warranty provided with the Sony DSC-W560 camera?

The camera typically comes with a manufacturer's warranty. Check the product documentation or contact Sony for warranty details.

Is this camera suitable for beginners in photography?

Yes, the camera is designed to be user-friendly and is suitable for beginners who want to capture quality still photos without extensive manual controls.

Download this PDF Link: Sony Cyber-Shot DSC-W560 14.1 MP Digital Still Camera Instruction Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>