VYSER F2 WiFi Bluetooth Projector

VYSER F2 WiFi Bluetooth Projector

WARNINGS

1. Do not look directly into the projector light.
2. Don’t touch the projecting lens.
3. The mains adapter is used as a disconnect device and it should remain readily operable during intended use. To disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
4. Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
5. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
6. Use of this unit near fluorescent lighting may cause interference regarding the use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
7. Shock hazard – Do Not Open.
8. Caution and marking information is located at the rear or bottom of the apparatus.
   • WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.
9. Objects filled with liquids, such as vases, shall not be placed on the apparatus.
10. If you have any questions while using this projector, pls contact us directly.
    • Email: service@vysertec.com.

PRODUCT OVERVIEW

1. Focus Lens
2. IR Receiver
3. HDMl 1
4. HDMl 2
5. USB 1
6. USB 2
7. AV Port
8. 3.5mm Port for Audio Output
9. IR Receiver
10. Speaker
11. Power
12. Cooling Window

1. Power

2. Menu

3. Input Source

4. Return

5. Ok Key

6. Arrow Keys

7. Rubber Foot Mats

8. Lens Cleaning Window

9. Ceiling Mounting Holes for the projector ( the size of the ceiling mounting holes is M6)

10. Height Adjustment Machine Feet

11. Cooling Window

REMOTE CONTROL

1. Power Button
2. Retreat Quickly
3. Arrow keys (Up, down, left, right)
4. Input source
5. Volume –
6. Mute
7. PlayKey
8. Fast Forward
9. OK
10. Menu
11. Exit
12. Volume +

Note: Before using the remote control, put two AAA batteries into the back cover of the remote control.

PRODUCT SPECIFICATIONS

Mounted Front Projection/ Ceiling Mounted Rear Projection
Projection Lens| 6 Slices Glass Lens
Aspect Ratio| 16:9/4:3
Lamp| LED, 100000 Hours
Power Supply| AC100V-240V-50/60Hz
Net Weight| 2.2kg

MULTIMEDIA SUPPORTED FILES

STARTING PROJECTOR

1. Power on/Power off
   • 5 seconds after power-on, then press the power key on the projector panel or the remote controller to turn on the device Press the power key on the projector control panel or the remote control to turn off the device.
   • When the machine is turned off, unplug the power line in time to save energy.
2. Focus and Keystone Correction
   • Focus (P1 ): Let the projector be perpendicular to the wall, and adjust the Focusing ring to make the picture clear.
   • Keystone Correction(P2): In a different angle, you put the projector, the the projection will Deformation like a trapezoid, use the keystone correction to make it correct.

CONNECTING

1. Select Signal Source
   • Press the project of 1he remote control, and enter the signal source menu. Use the amm keya and “OK” to select the signal source.
2. Wired Projection
   • Connect an iPhone
   • Select “Miracast” in the signal source menu of the projector.
   • Plug the iPhone original USB charging cable into the USB1 port of this projector.
   • Please select “Trust this device” when the iPhone asks “Trust” or “Don’t trust”
   • NOTE: Android devices cannot be connected by a wire, only by wireless.
3. Wireless screen casting
   • Connect Smartphone
   • For iPhone
   • Select “Miracast” in the signal source menu of the projector and then select “the one-step direct connection”.
   • Swipe down from the top of the iPhone interface to enter the control center, then click “Screen Mirroring”, select CLcast-****, and enter PIN code: 9999 to complete the connection.
   • For Android phone
   • Select “Miracast” in the signal source menu of the projector, and then select one step to connect directly.
   • Slide up from the bottom of the Android phone interface to enter the control center, then click “Screen Mirroring” and select CLcast-**** to complete the connection.
   • For Windows devices
   • Select “Miracast” in the source menu of the projector, and then select “WIFI CONNECTION”.
   • Select the next step to connect the projector to your WiFi.
   • Connect your Windows device to your WiFi (connect to the same WiFi as the projector)
   • Press “Windows Key” + “P” on your Windows device, select “Connect to Wireless Display”, then dick “CLcast-***” to start screen sharing.

Add: Different brand laptop output keys are as follows:

Connecting a tablet or other WiFi device

1. Select “Miracast” in the signal source menu of the projector and then select WI-FI CONNECTION
2. Click next to connect the projector to your WIFI.
3. Connect your device to WIFI. (the same wifi as the projector)
4. Open Control Center on your device, select Screen Mirroring, search, and click CLcast-**** to complete the connection.

Connecting to HDMI Devices

The projector can connect to devices with the HDMI output function. Compatible with

1. Laptop, DVD players, Blu-ray players, Chromecast, TV Stick, etc. (HDMI cable is included).
2. Use the HDMI cable (included in the package) to connect the HDMI device to the projector Select media signal channel: “HDMI”.

Add: Different brand laptop output keys are as follows:

The user of Windows 7 or over Windows 7. Simply press the + P, and select duplicate to connect. If the operation above is invalid, please update the computer graphics driver.

Connect the USB drive

1. Plug a USB drive into the USB port of the projector, and when “USB” is in the upper right corner of the projector, connect successfully.
2. To play a video, picture, music, or text stored in a USB drive, select “Movie”/ “Photo”/ “Music”/”Text” on the main menu, and press “OK”.

Note:

• The chip of this projector is not compatible with files (Microsoft Office, PDF, and text) on the USB stick if you want to play files, please keep the files on your laptop or DVD player, then connect this projector to them.)

Connect AV video devices

• Use the 3 1 video cables (Included in the package) to connect with AV.
• 2 Choose the media signal channel: “AV”.

Connect 3.5mm audio devices

• Support 3.5mm earphones and other cable sound devices.

Connect Bluetooth audio

• Warm Tips:
  • Bluetooth projectors can only be used to connect sound devices such as speakers, headphones, sound bars, etc, not to computers or smartphones.

How to Connect the Bluetooth Device

Auto & Static Connection Method:

When you are trying to connect to a Bluetooth device, please make sure the Bluetooth device is on and in Bluetooth pair mode before connecting.

1. Start the Projector and click on “Setting” – “Setting” – “Bluetooth Settings” (as shown above), turn on the Bluetooth – then press “Search Bluetooth”, The Bluetooth device name will be shown below, select the right device and press the “OK key” to connect it.

PROJECTOR SETTING

PICTURE MENU:

When “Picture Mode” is “User”, the Contrast / Brightness / Color / Sharpness can be adjusted.

module
Projection Direction| Front on Desk/Rear on Desk/ Front on Ceiling/ Rear on Ceiling| Set up the projection model

SOUND MENU:

When “Sound Mode” is “User”, the Treble /Bass can be adjusted.

speaker

TIME SETTING:

set

am o unt o f tim e

Auto Sleep| Off/3/4/5 H| Set automatic sleep timer
OSDTimer| Never/5/10/15/20/25/30s| Set OSD timing

SETTINGS:

displayed in the operation
Aspect Ratio| 4:3/ 16:9|
Blue Screen| | No signal blue screen operation
Bluetoo th Setting| ON /OFF| Connect your Bluetooth device
Restore Factory Default| | Reset
Software Update(USB)| | Update software via USB
Projection Zoom| 75-100%| Reduce the projection size

TROUBLESHOOTING

1. Why is the display of the projector available but without audio?
   • The Projector or the connected device (PC, DVD, etc.) is muted.
   • Due to Dolby’s copyright issues, the current regular projectors selling on Amazon do not support Dolby Sound, So there will be no sound when you play Dolby Sound videos, (Amazon Fire Stick, Netflix, Blue-ray movies, and so on) In this case, please kindly turn off the Dolby sound on your device or apps.
   • (Settings > Display & Sounds > Audio > Dolby Digital Output > and then turn Dolby Digital (OFF))
   • The audio format is not supported by the projector.
   • Encryption is applied to the videos or media player that holds the video. Try more videos to define this possibility.
2. Why is the audio of the projector available but without a display?
   • The video format is not supported by the projector.
   • Encryption is applied to the videos or media player that holds the video.
   • If the lamp of the projector is off with only audio playing, the lamp is defective. Please contact the Customer Service Team for a replacement.
   • Try another HDMI cable if you select the HDMI input source.
3. Why does the projection screen show no signal?
   • Make sure all cables are plugged correctly and firmly.
   • Make sure you select the right input source. For example, if you insert a USB drive, please select USB in the interface of Input Source.
4. What can I do if the image is blurry or out of shape?
   • Adjust the focus and keystone ring by moving it leftward/rightward till it shows the best images.
   • Place the projector on a flat surface horizontally or vertically. An inclination of any angle may result in blurry displays or uneven colors.
   • The projecting wall or screen be clean white if possible.
5. What can I do if the image is upside down?
   • Enter Menu-Picture-Projection Direction to flip the projection image accordingly.
6. What can I do if the projection screen is not square or allied horizontally?
   • Make sure the projector is placed on a flat surface with a projector light in the middle of the screen.
   • Make sure the projector screen is placed horizontally.
7. What can I do if there is color distortion?
   • Make sure the video source has a fine resolution.
   • Adjust the colors: enter Menu-Picture-Color Temperature, then select different modes and adjust the value accordingly.
   • Reset the projector to the manufacturer setting: enter Menu-Option Restore Factory Default to reset.
8. What can I do if the remote is unresponsive?
   • Make sure the batteries are installed correctly and the power is enough.
   • The remote works with the projector through the IR receiver. The remote works only when the IR receiver is within the direct reaction distance and will be unresponsive if the IR receiver is blocked or covered.
9. What should I do if there are small dots on display?
   • It may be caused during installation or shipping, please contact GROVIEW to get the video about how to clean it.
10. Why do some lag/ jerky appear when playing video or play games?
    • Due to the technical bottleneck of the current 1080p projectors, most of the 1080p projectors on the market cannot smoothly play 1080p/60fps videos. Hope you can understand. Please change the 1080p/60fps to 1080p/30fps.
11. How to Connect and Watch Netflix?
    • All projector with mirror display doesn’t support playing protected video when you connect it to your smartphone directly.
    • (Netflix, Prime Video, Hulu, etc) Because these videos have an encryption protocol, the projector has no right to recognize when it is connected directly to the phone via the USB interface.
    • Hope you understand. (Projector without mirror display, need an HDMI adapter if you want to connect it to your smartphone) Please follow the ways below to watch Netflix
12. First Solution:
    • You can watch Netflix via Chromecast/laptop/TV stick/Roku on our projector. Please contact us via email if you don’t have any of them so that you can get a Roku for free. Email: service@vysertec.com
13. Second Solution:
    • You can connect the computer/ Smart TV to the projector through HDMI when playing movies from Netflix
14. Third Solution:
    • You can buy a Wireless HDMI Dongle to mirror your phone.
    • The reason why Firestick or other HDMI devices can play Netflix is that the HDMI interface encryption protocol includes Netflix.
    • It works with YouTube, chrome, safari, and Facetime when you connect it to a smartphone directly.

Model: F2
Please read this manual carefully before using the projector.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>