Arrow Dancer P91 ANC ENC Double Mark Call Noise Reduction Bluetooth Headset User Guide

**Arrow Dancer P91 ANC ENC Double Mark Call Noise Reduction Bluetooth Headset User Guide

Product Parameters

Warnings

• Do not disassemble the earphones.
• Please use standard cable and adapter for charging.
• This machine supports left and right ear wear

Pairing Instructions

Power On
The headset will start automatically when it is removed from the charging bin or long press the touch position of the headset for 5 seconds. The red and blue light will flash and there will be a prompt sound of “Dong dong”.

Pairing
The left and right ear blue light blinks slowly

Bluetooth Connection
Turn on the Bluetooth of the mobile phone and search for “7003D4QSP9” for pairing. After the connection is successful, a prompt tone “dong dong” will be played.

Key Function

• Play/Pause:
  1 touch (both left and right ears)

• ANC and Transparent model
  Touch 2 left ear

• Summon SIRI:
  Touch 2 on your right ear

• Next Track:
  Touch 3 on your right ear

• Answer Calls:
  Touch 1, the phone rings normally (automatic noise reduction)

• Hang up/Reject:
  Touch 2 time. (both left and right ears)

• Previous Track:
  Touch 3 left ear

Power off: Long press the touch position for 5 seconds to Power off the earphone, and there will be a “dong dong” sound, or put the earphone into the charging case and cover the earphone will automatically charge and shut down (when the charging bin has electricity).

Charging diagram

Charge the Earphones

When the earphone is put into the charging bin, the corresponding horse running light will turn on, indicating that the earphone is charged, and the earphone will be taken out, and the corresponding horse running light will turn off.

Charge the Charging case

Please use the type-c charging cable to charge. When charging, the mint-number in the middle of the display screen will flash, and stop flashing when it is fully charged.

Charge times

The charging case will recharge the headset about 4-5 times

packing list

• Wireless Earphones
• Manual
• Charging Cable

Matters needing attention

Please store and use this product at normal temperature environment.
Do not expose this product to rain or moisture.
Do not throw, advoid product being damaged and cause falling.
Do not discard it at will, or put it at high temperature (temperature above 60 degrees) and fire to avoid danger;
Do not disassemble, repair or modify this product yourself.

Warning: The rechargeable batteries of this product must be disposed of properly for recycling, Please do not put the battery in the fire to avoid explosion.

Use tips to share

1. Because of the 2.4GHz radio wave used by Bluetooth, the equipment using this band is more common (such as wireless WIFI, etc.), the headset is easily interfered, and here may be discontinuities, which is correct. If you are unable to recover, stay away from this environment or reconnect.
2. After the Bluetooth headset is turned on, it will automatically connect to the phone that was paired last time. If you want to pair with another phone, please turn off the Bluetooth of the original phone. When the Bluetooth headset is turned on, other phones can search for devices by turning on Bluetooth.
3. When not using the headset, put the headset in the charging case, and the headset will automatically shut down and recharge the battery. If you do not have a charging case, you can manually disconnect the Bluetooth connection, and the headset will automatically shut down after about 5 minutes.
4. If you feel that the sound quality is poor for the first time, here is no heavy bass, or it is uncomfortable to wear and easy to fall, etc. It is recommended that you move and adjust the earphones to make the sound outlet closer to the ear canal.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. ( 2)This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a dads B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation, if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for heel

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>